Peocke L300

Contents

Peocke L300 Motorcycle Navigation GPS User Manual

Model: L300

2025 Newly Upgraded Motorcycle Navigation GPS with Tire Pressure Display, WiFi & Bluetooth

1. Introduction

Thank you for choosing the Peocke L300 Motorcycle Navigation GPS. This device is designed to enhance your riding experience with its 6.3-inch high-resolution display, seamless integration with Wireless CarPlay and Android Auto, and robust IPX7 waterproof and anti-drop design. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure you get the most out of your device.

Peocke L300 Motorcycle Navigation GPS mounted on a motorcycle, displaying its user interface with CarPlay, Android Auto, DVR, Settings, and tire pressure information.
Figure 1: Peocke L300 Main Unit Interface
Peocke L300 device partially submerged in water, demonstrating its IPX7 waterproof rating.
Figure 2: IPX7 Waterproof Design

The L300 features a rugged body with anti-drop protection, ensuring normal operation even in harsh environments. Its IPX7 waterproof rating makes it fearless of any weather, accompanying you on rainy day rides.

2. Package Contents

Please check the contents of your package. If any items are missing or damaged, contact customer support.

  • Main Unit (Peocke L300 Display)
  • Bracket (Zinc Alloy Bracket)
  • Power Cable (ACC Power Cable, 2.5m)
  • USB Adapter Cable
  • Tool Kit (Screwdriver, Zip Ties)
  • TPMS Service Pack (Optional, includes Tire Pressure Sensors)
Contents of the Peocke L300 package including the main unit, power cables, bracket, and tire pressure sensors.
Figure 3: Package Contents

3. Setup

3.1. Bracket Installation

Ensure that the installation of the main unit, bracket, and other components does not block the driver's line of sight, ensuring driving safety.

  1. Secure the lower part of the bracket to the motorcycle handlebar and tighten the screws.
  2. Insert the ball socket base of the upper bracket part into the ball head of the lower bracket port.
  3. Attach the ball head on the back of the device into the ball socket base of the upper bracket.
  4. Adjust the device to the desired angle and tighten the bracket clamp.

3.2. Wiring Diagram

Proper wiring is essential for the device's functionality. Please follow the diagram carefully.

  • Black wire: Connected to the negative pole of the power supply or GND.
  • Yellow wire: Connected to the positive pole of the power supply.
  • Red wire: ACC power.

ACC Power Supply: An ACC power supply is identified as being in the ACC state when the motorcycle's electrical switch is in the OFF position and the voltage is 0 V, and when the switch is in the ON position, the voltage is between 11-14.4V.

Wiring diagram showing connections for Power, GND, B+, and ACC.
Figure 4: Wiring Diagram (Refer to the image for detailed visual)

3.3. Tire Pressure Sensor Installation (Optional)

If your package includes the TPMS Service Pack, follow these steps to install the tire pressure sensors.

  1. Enter the tire pressure binding interface on the device and select the tire you want to bind (Front or Rear).
  2. Install the tire pressure sensor on the corresponding tire. The installation steps are as follows:
    1. Remove the tire valve cap.
    2. Screw in the hex nut and then install the tire pressure sensor.
    3. Using a wrench, reverse rotate the hex nut to push it into the sensor.
    4. Spray soapy water around the valve to check for leaks.
  3. Follow the above steps in order, and the tire pressure sensor will be successfully bound.

Note: This device supports tire pressure monitoring for two-wheeled, three-wheeled, and four-wheeled vehicles. Different types of vehicles can be selected and tire pressure monitoring sensors can be bound.

4. Operating Instructions

4.1. Home Screen Interface

The home screen provides quick access to key functions and information.

  1. Date, Week, and Time: Displays current date and time.
  2. CarPlay: Enter the Apple CarPlay screen mirroring mode.
  3. Android Auto: Enter the Android Auto screen mirroring mode.
  4. Screen Off: Click to close the screen.
  5. Settings: Enter the device setting mode.
  6. Tire Pressure Info: Enter the tire pressure binding and setting mode (you need to enable it in the settings first).

4.2. Connecting Apple CarPlay

  1. Go to the "Settings" menu on your iPhone and enable Bluetooth and Wi-Fi.
  2. Go to the "Bluetooth" menu and under the "OTHER DEVICES" list, select the Bluetooth named "Ride Play ****".
  3. Wait for about 20-30 seconds, and your iPhone will display a "Bluetooth Pairing Request" window. Select "Pair".
  4. Your iPhone will then prompt you with a "Use CarPlay with 'SmartScreen'?" window. Select "Use CarPlay".
  5. Wait for a moment, and you will enter CarPlay mode.

Important Notes for CarPlay:

  • Both CarPlay and the iPhone voice system need to be enabled, so please check if Siri is turned on.
  • Different iOS versions may have variations from the example provided, so please refer to your actual situation.
  • If you want to switch to Android Auto, you need to disable Bluetooth and Wi-Fi on your iPhone and disconnect from Apple CarPlay mode.

4.3. Connecting Android Auto

  1. Go to the "Settings" menu on your phone and enable Bluetooth and Wi-Fi.
  2. Tap on the "Bluetooth" menu to access the Bluetooth search page.
  3. Click on "Pair new device".
  4. From the list of Available devices, select the Bluetooth named "Ride Play ****".
  5. Wait for about 20 seconds, and your phone will display a "Pair with Ride Play ****" window. Select "Pair".
  6. Wait for a moment, and you will enter Android Auto mode.

Important Notes for Android Auto:

  • Please make sure your phone is running on Android 11 or above and supports 5GHz Wi-Fi and Google Play services.
  • Display and settings may vary across different Android models, so please refer to your actual situation.
  • If you want to switch to Apple CarPlay, you need to disable Bluetooth and Wi-Fi on your phone and disconnect from Android Auto mode.

4.4. Audio Output

The device can connect to Bluetooth earphones for audio output, allowing you to hear navigation instructions and music clearly while riding.

  • Connect your phone or tablet via Bluetooth without the need for additional software installation.
  • Bluetooth effective control range is 10 meters.
  • Pressing the button for 30 seconds without operation will disconnect and enter sleep mode. Pressing any button can wake up and automatically reconnect.
  • Equipped with 180mAh battery, Type-C charging, 0.5-second wake-up, 5-month ultra-long standby (for remote control, if included).
Diagram showing the dimensions and features of the remote control for the navigation unit.
Figure 5: Remote Control Features (if included)

4.5. System Settings

Access the settings menu to customize your device.

  • About: View the current device model, serial number, and version number.
  • Boot Logo: Customizable startup logo.
  • Restart System: Restart the device.
  • Factory Data Reset: Restore all settings to factory defaults.

General Settings:

  • Theme: Set the theme to night, day, or automatic.
  • Language: Choose from multiple languages including English, Chinese, Russian, Spanish, French, German, Japanese, Korean, Italian, Polish, Dutch, or Portuguese.
  • Set Time: Adjust date, time, and time display format.
  • Bright Level: Adjust screen brightness, or set to Auto dimming.
  • Tire pressure info: Enable or disable tire pressure monitoring function.

Bluetooth Settings:

  • Bluetooth Name: Customizable Bluetooth name.
  • Paired Device: View paired Bluetooth devices.

Video: Demonstration of CarPlay navigation, music playback, and TPMS display on the Peocke L300.

5. Maintenance

  • Cleaning: Ensure that the screen is clean. Foreign objects may scratch the lens. It is recommended to clean the screen with a soft, dry cloth.
  • Environmental Exposure: The device may become clogged with mud and sand during use. Please rinse with clean water.
  • Chemicals: All parts should avoid cleaning with petrol, oil-based cleaners, and other organic solvents, as this may cause corrosion, waterproofing failure, and protective coating failure.

6. Troubleshooting

6.1. Android Auto Connection Issues

Symptom: Android Auto connects well the first time, but when you turn off the engine, it doesn't reconnect. It might reconnect after leaving it off for about a day.

Possible Solutions:

  • Ensure your Android phone is running Android 11 or above and supports 5GHz Wi-Fi and Google Play services.
  • Try forgetting the device in your phone's Bluetooth settings and re-pairing.
  • Restart both your phone and the L300 device.
  • Check for any available firmware updates for the L300 device (refer to Firmware Upgrade section in the full PDF manual).
  • If the issue persists, try disabling and re-enabling Bluetooth and Wi-Fi on your phone before attempting to connect.

6.2. Device Not Powering On via USB

Question: If the USB is plugged into 12V, can it power the unit?

Answer: The unit is designed to be powered by the ACC power cable (11-14.4V). While some users report success with USB power for short-distance use, consistent and reliable power should come from the ACC connection as per the wiring diagram. Ensure your USB power source can provide sufficient and stable voltage/current if you choose to use it.

7. Specifications

FeatureSpecification
Brand NamePeocke
Max External Memory256G
Screen Size6.3 INCH
Waterproof LevelIPX7
MaterialABS and Metal
Resolution1560*720
Tire Pressure DisplaySupport (Optional)
BluetoothSupport
WIFISupport
Wireless Android AutoSupport
Wireless CarplaySupport
Stable Operating Temperature-20°C~70°C

8. User Tips

  • Smooth Operation: The device offers smooth scrolling and operates much like a car's CarPlay system.
  • Screen Brightness: The LCD screen is very bright, with day and night modes, as well as an automatic mode that adjusts brightness with the environment. This ensures good visibility in various lighting conditions.
  • Power Source: While designed for ACC power, some users have successfully powered the unit via USB for short distances. Ensure your USB source is stable if used.
  • Installation Time: Installation, including cabling, typically takes about an hour or more. Plan accordingly.
  • Weather Testing: The device is IPX7 waterproof, but it's always good practice to ensure all connections are secure before riding in heavy rain.

9. Warranty and Support

For detailed warranty information, technical support, or further assistance, please refer to the official product documentation or contact your retailer. A comprehensive user manual in PDF format is available for download from the product page or by scanning the QR code provided with your device.

PDF User Manual: For more in-depth instructions, including firmware upgrade procedures, please refer to the full user manual available at https://manuals.plus/m/0bf89cea802da36f79b62eed6759b1866d56125416a63904a6b96c3618fe2bbb


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.