TRIMUI Smart Pro S (TG5050)

Contents

TRIMUI Smart Pro S Handheld Game Console

Model: TG5050

1. Introduction

The TRIMUI Smart Pro S is an open-source handheld game console designed for retro gaming enthusiasts. It features an optimized Linux system, a vibrant 4.96-inch IPS screen, and enhanced controls for a superior gaming experience. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device.

Trimui Smart Pro S Handheld Game Console

Figure 1: TRIMUI Smart Pro S Handheld Game Console

2. Safety Information

Please read and follow these safety guidelines to ensure safe operation and prolong the life of your device:

  • Keep the device away from water, moisture, and extreme temperatures.
  • Avoid dropping or subjecting the device to strong impacts.
  • Do not attempt to disassemble or repair the device yourself. Refer to qualified personnel for service.
  • Use only the provided charging cable and a compatible 5V/2A charger.
  • Keep out of reach of small children due to small parts.

3. Package Contents

The TRIMUI Smart Pro S package includes the following items:

  • 1 x TRIMUI Smart Pro S Console
  • 1 x USB Type-C Charging Cable
  • 1 x User Manual (PDF available online: View PDF)
  • 1 x Giftbox
  • (Optional) 1 x Portable Bag (depending on bundle)
Package Contents Diagram

Figure 2: Package Contents

4. Device Overview

Familiarize yourself with the console's layout and controls:

Trimui Smart Pro S Console Views

Figure 3: Console Front, Back, and Side Views (Yellow model shown)

4.1. Controls and Ports

  • D-pad: Up, Down, Left, Right directional input.
  • A/B/X/Y Buttons: Action buttons.
  • Select/Start/Menu/Home Buttons: System navigation and game functions.
  • L1/L2/R1/R2 Buttons: Shoulder and trigger buttons. The L2/R2 triggers are larger for better control.
  • TMR Hall Joysticks (L3/R3): Precise, pixel-level control, supports pressing down.
  • Power Button: Press and hold for 5 seconds to return to the main menu or power off.
  • Volume Buttons (+/-): Adjust audio volume.
  • Custom FN DIP Switch: For custom function assignments.
  • Top Type-C Port: USB Host interface.
  • Bottom Type-C Port: Charging/OTG interface.
  • TF Card Slot: For storage expansion (supports up to 1TB).
  • 3.5mm Headphone Jack: For audio output.
  • Microphone: Built-in mono microphone.
  • Speakers: Built-in stereo speakers (1W x 2).
  • RGB Ambient LED: Dual joystick RGB ambient lighting.
  • Trimui LOGO Charging Indicator Light: Indicates charging status.
  • Active Cooling System: Features air inlet and outlet for controlled airflow.

5. Setup

5.1. Initial Charging

Before first use, fully charge the console. If the device has not been charged for a long time, or an incompatible charger is used, you might encounter charging issues. Follow these steps:

  1. Shut down the console: Press and hold the power button until the light goes out.
  2. Connect the USB Type-C charging cable to the bottom Type-C port on the console and to a 5V/2A charger.
  3. Charge for more than 1-2 hours. The Trimui LOGO light will be red while charging. It will turn off when fully charged.

Note: Do not use any fast charging adapters. The USB data transmission current is limited to 500mA.

Charging Instructions

Figure 4: Charging Instructions

5.2. SD Card Preparation (Firmware Update)

To ensure optimal performance and access to the latest features, it is recommended to prepare your SD card with the latest firmware:

  1. Format the SD card to FAT32.
  2. Go to the official TRIMUI website or GitHub to download the latest firmware and SD base package.
  3. Unzip the downloaded package and copy its contents directly to the SD card. The SD base package does not contain any game content.
  4. Copy your game files and thumbnails into the appropriate folders, commonly in the "Roms" folder.

6. Operating Instructions

6.1. Basic Navigation

  • Use the D-pad or TMR joysticks to navigate through menus.
  • Press the A button to confirm selections.
  • Press the B button to go back.
  • Press the Menu button to access system options or game-specific menus.
  • The screen does not support touch input.

6.2. Game Management

  • Switching Views: In the game catalog page, use the START or MENU buttons to switch between different views.
  • Searching Games: Press the MENU button, then select 'Search' to find games in your catalog.
  • Adding Games and Thumbnails: Copy game ROMs and corresponding thumbnail images (PNG format) to the designated folders on your TF card.
  • Editing Game Catalog Visibility: In the game catalog page, select 'Automate edit mode' from the MENU options to check or uncheck games for display.
  • Adding/Deleting Favorites: In the game catalog, press MENU and select 'Add to Favorites' or 'Delete'.

6.3. Netplay (Multiplayer)

The console supports netplay with other users via LAN or Hotspot.

6.3.1. Netplay via LAN

  1. Ensure all players have the same game ROM.
  2. All players must be connected to the same WLAN network.
  3. All players turn on the netplay function in 'Settings' > 'System'.
  4. The host player enters the game directly.
  5. After a short while, slave players will be able to discover the game found on the host in 'Netplay'. Select and press to join the game.
  6. Tip: Please wait for the host game to be ready before joining as a slave.

6.3.2. Netplay via Hotspot

  1. Ensure all players have the same game ROM.
  2. The host player opens a hotspot, and slave players connect to it.
  3. All players turn on the netplay function in 'Settings' > 'System'.
  4. The host player enters the game directly.
  5. After a short while, slave players will be able to discover the game found on the host in 'Netplay'. Select and press to join the game.

6.4. System Settings

  • Switching Language: Navigate to 'Settings' > 'System' > 'Language' to change the user interface language.
  • Date and Time Synchronization: Connect the console to a Wi-Fi network that can access the internet, and the date and time will synchronize automatically.
  • USB Data Transfer: To modify the SD card content via a USB cable, find and open the 'Application USB Storage' option in the system.

7. Maintenance

  • Clean the console regularly with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
  • Keep the air inlets and outlets clear of dust and debris to ensure proper cooling.
  • Store the device in a cool, dry place when not in use, preferably in a protective case.
  • Avoid prolonged exposure to direct sunlight.

8. Troubleshooting

8.1. Charging Issues

  • Battery level is 0% after long charging, or battery level has not increased: This can occur if the machine has not been charged for a long time or an incompatible charger is used.
  • Charging light does not light up or flickers when cable is plugged in: Similar to above, often related to prolonged disuse or incompatible charger.

Operation Suggestions for Charging Issues:

  1. Shut down the console (Press and hold the power button until the light goes out).
  2. Charge for more than 1-2 hours (a 5V/1A charger is recommended).

8.2. General Issues

  • Device unresponsive: Press and hold the Power button for 5 seconds to perform a soft reset. If unresponsive, allow the battery to fully drain and then recharge.
  • Games not appearing in catalog: Ensure game ROMs and thumbnails are correctly placed on the TF card and the catalog visibility is set correctly.
  • Netplay connection issues: Verify all devices are on the same network (LAN or Hotspot) and have the same game ROM. Ensure netplay function is enabled in settings.

9. Specifications

Overview of Specifications

Figure 5: Overview of Key Specifications

TRIMUI Smart Pro S (TG5050) Technical Specifications
Feature Description
Color OptionsBlack, Gray, White, Green, Red, Yellow
CPUAllwinner A523 Octa-core Processor @ 2.0GHz
GPUArm Mali-G57 MC1 @ 744MHz
DRAM1GB LPDDR4
Built-in Storage8GB eMMC
External StorageSupports up to 1TB TF card expansion; USB interface supports FAT32 format U disk
Display4.96 inch IPS full-fit screen, 1280x720 resolution. Screen does not support touch.
WirelessWLAN 802.11 a/b/g/n/ac/ax (2.4GHz/5GHz)
BluetoothBT 5.4
SpeakerBuilt-in stereo speakers (1W x 2)
Earphone3.5mm headphone jack
MicrophoneBuilt-in mono microphone
Battery5000 mAh Li-polymer battery (3.7V), up to 6 hours battery life
ChargingUSB Type-C interface supports 5V/2A charging
LED IndicatorsTrimui LOGO charging indicator light, Dual joystick RGB ambient light
Function KeysD-pad, A/B/X/Y, Select/Start/Menu/Home, L1/L2/R1/R2, L3/R3 (joystick press)
Other Function KeyPower/Volume-/Volume+/Custom FN DIP switch
SocketsTop Type-C: USB Host; Bottom Type-C: Charging/OTG; Storage expansion: TF card slot
VibrationVibration motor
Joystick TypeTMR Hall joystick (pixel-level precise control)
Operating SystemLinux (Opendinglinux)
System UITrimui UI
Supported LanguagesJapanese, French, German, Italian, Spanish, Portuguese, Russian, English, Korean, Simplified Chinese, Traditional Chinese Style
MaterialABS plastic + glass + electronic components
Product DimensionsWidth: 187.4 mm (7.38 inch), Height: 79.8 mm (3.14 inch), Depth: 17.2 mm (0.68 inch)
Net Weight256 g
Recommended Age6+
CertificationCE

10. User Tips

  • The console is compact and portable, similar in size to a Nintendo Switch without Joy-Cons, making it convenient for travel.
  • The upgraded CPU (Allwinner A523) and TMR Hall joysticks provide a smoother and more precise gaming experience compared to previous models.
  • The active cooling system helps maintain optimal performance during extended gaming sessions.
  • The device runs on an open-source Linux system, allowing for customization and broader game compatibility.

11. Warranty and Support

For any issues or support inquiries, please refer to the seller's official support channels. Keep your purchase records for warranty claims.

11.1. FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The equipment should be installed and operated with a minimum distance of 0mm between the radiator and your body.

© 2024 TRIMUI. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.