1. Introduction
The TEKIVI DC 8-100V LCD Digital Voltage Electricity Indicator is an upgraded large-screen power meter designed for precise measurement and monitoring of various battery types. It features a high-definition display with a wide viewing angle and utilizes an SOC algorithm for enhanced accuracy. This versatile device is compatible with ternary, lithium iron, and acid batteries, offering real-time voltage, percentage, and temperature readings.
Key features include power-off memory, automatic calibration, real-time temperature detection, backlight settings, and voltage alarm reminders to ensure safer use by setting overcharge and overdischarge thresholds.
The device is suitable for a wide range of applications, including server rooms, RVs, electric vehicles, and energy storage equipment.
2. Safety Information
- Ensure the voltage range of your battery system is within the device's specified DC 8-100V.
- Do not expose the device to extreme temperatures, moisture, or corrosive environments.
- Disconnect power before making any connections or disconnections.
- Handle wiring carefully to prevent short circuits.
- Keep out of reach of children.
- Do not attempt to disassemble or modify the device.
3. Package Contents
- Power Indicator (Model 6839) x 1
4. Product Overview
The TEKIVI power indicator features a clear LCD display, a control button, and wiring for connection to your battery system. It comes in two models: waterproof and non-waterproof.
4.1 Dimensions
- Waterproof model: 68.5mm * 38.5mm * 14.1mm
- Non-waterproof model: 73.78mm * 43.8mm * 14mm
- Non-waterproof model opening size: 68.78mm * 38.8mm
4.2 Major Functions
- Power-off memory
- Automatic calibration
- Battery voltage display
- Remaining battery percentage display
- Voltage alarm reminder
- Real-time temperature monitoring
- Fe-Li battery power monitoring
- Ternary battery power monitoring
- Acid battery power monitoring
- Custom battery monitoring settings
- Backlight settings
- Battery SOC curve import
5. Setup and Installation
Before installation, ensure your battery system is powered off. Refer to the wiring diagram below for correct connections. The device is designed for direct connection to the battery terminals.
5.1 Wiring Instructions
Connect the red wire to the positive (+) terminal of your battery and the black wire to the negative (-) terminal. Ensure connections are secure to prevent intermittent readings or damage.
5.2 Initial Configuration
Upon first power-up, you may need to configure the device for your specific battery type (acid, lithium ternary, or lithium iron phosphate). Use the control button on the device to navigate through settings. Detailed instructions for battery type selection and alarm threshold settings are typically found in the full user manual (PDF).
The device supports setting over-charging and over-discharging voltage alarm reminders. These thresholds can be adjusted to match your battery's specifications for optimal safety and longevity.
6. Operating Instructions
Once installed and configured, the device will display real-time battery voltage, remaining battery percentage, and temperature. The display is high-definition with a wide viewing angle for easy readability.
- Voltage Display: Shows the current battery voltage in Volts (V).
- Percentage Display: Indicates the remaining battery capacity as a percentage (%).
- Temperature Display: Shows the real-time ambient temperature in Celsius (°C).
- Control Button: Press the button to cycle through display modes or access settings. A long press may enter configuration mode.
- Voltage Alarm: If the battery voltage exceeds or falls below the set thresholds, the device will activate built-in flashing lights and an audible alarm.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the display and casing. Do not use abrasive cleaners or solvents.
- Environmental Conditions: Avoid prolonged exposure to direct sunlight, high humidity, or dusty environments.
- Connections: Periodically check all wiring connections to ensure they are tight and free from corrosion.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No display/Device not powering on | Incorrect wiring; No power from battery; Battery voltage outside 8-100V range. | Check wiring connections (red to +, black to -). Verify battery has power. Ensure battery voltage is within the specified range. |
| Inaccurate readings | Incorrect battery type setting; Loose connections; Device malfunction. | Verify the correct battery type is selected in settings. Check and tighten all connections. If problem persists, contact support. |
| Alarm constantly active | Battery voltage is genuinely too high/low; Alarm thresholds set incorrectly. | Check battery voltage with a multimeter. Adjust alarm thresholds in settings to match your battery's safe operating range. |
9. Specifications
| Parameter | Value |
|---|---|
| Model Number | 6839 |
| Voltage Range | DC 8-100V |
| Resolution | 0.01V |
| Detection Temperature | -20~80°C |
| Operating Current | ≤20mA |
| Display Type | Digital Only |
| Power Supply/Source | DC |
| Battery Included | No |
| Waterproof Model Size | 68.5 * 38.5 * 14.1 mm |
| Non-Waterproof Model Size | 73.78 * 43.8 * 14 mm |
| Non-Waterproof Model Opening Size | 68.78 * 38.8 mm |
| Alarm Reminder | Built-in flashing lights, audible alarms |
10. User Tips
- Regular Monitoring: Make it a habit to check your battery's status regularly, especially before and after heavy use, to prevent unexpected power issues.
- Correct Battery Type: Always ensure the device is configured for the correct battery chemistry (ternary, lithium iron, or acid) to get accurate readings.
- Alarm Thresholds: Customize the overcharge and overdischarge alarm thresholds to match your battery manufacturer's recommendations for optimal battery health and safety.
- Power-off Memory: Take advantage of the power-off memory feature, which retains your settings even after the device is powered down.
11. Warranty and Support
For detailed warranty information and technical support, please refer to the official user manual PDF or contact the seller directly. The user manual (PDF) can be found at: TEKIVI Power Indicator User Manual (PDF).