kewig M26S

Contents

Kewig M26S Motorcycle Phone Holder

Instruction Manual

1. Safety & Warnings

⚠ To avoid damaging your phone, please adjust the appropriate tightness according to the size of your phone.

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Please do not place the product near a fire source.
  • Supports phone sizes ranging from 4.7" to 7" with a thickness less than 0.75" (approx. 20mm).
  • Supports handlebars with diameters ranging from 0.47" to 1.26".
  • When using, please ensure that the fixture is securely fastened to the handlebars.

2. Setup Instructions

Before first use, remove all packaging materials. Assemble and fix the required accessories according to the following steps:

  1. Choose Installation Mode: The phone holder supports two main installation types: handlebar mount and rearview mirror mount. Select the appropriate base for your vehicle.
    Comparison of two installation modes: rearview mirror mount and handlebar mount.
    Figure 2.1: Two installation modes: Rearview mirror and Handlebar.
  2. Assemble Components: The package includes various components for assembly. Identify the main phone holder unit, the alloy base, and the anti-theft knob.
    Exploded view of phone holder components.
    Figure 2.2: Main components of the phone holder.
  3. Install the Base: Secure the alloy base firmly onto your chosen mounting point (handlebar or rearview mirror stem). Ensure it is tightened securely to prevent movement.
    Close-up of the durable aluminum alloy base for secure mounting.
    Figure 2.3: Secure aluminum alloy base installation.
  4. Attach Phone Holder: Connect the phone holder unit to the installed base. The design allows for 360-degree rotation for optimal viewing angles.
    Illustration of 360-degree rotatable adjustment and the ability to switch between horizontal and vertical screen orientations.
    Figure 2.4: 360-degree rotatable adjustment.
  5. Secure with Anti-Theft Knob: Use the provided anti-theft knob to secure the phone holder to the base. This prevents easy removal of the holder when parked outdoors.
    Detail of the anti-theft knob mechanism to prevent bracket theft.
    Figure 2.5: Anti-theft knob for added security.

3. Operating Instructions

The Kewig M26S phone holder is designed for secure and convenient phone use while riding.

  1. Inserting Your Phone: The holder features an adjustable width (63-91mm) and eight claws with soft silicone protection. Gently pull the top arm upwards and place your phone into the holder, ensuring it sits snugly within the silicone claws. The holder is compatible with phones between 5.4 and 7.2 inches and a maximum thickness of 20mm (including case).
    Close-up of the phone holder showing eight claws with soft silicone protection for enhanced phone safety.
    Figure 3.1: Eight claws with soft silicone protection.
    Image illustrating phone compatibility (5.4-7.2 inches) and adjustable width (63-91mm) of the holder.
    Figure 3.2: Adjustable width for various phone sizes.
  2. Adjusting Position: Utilize the 360-degree rotatable ball design to adjust your phone to the desired viewing angle. You can easily switch between horizontal and vertical screen orientations.
    Illustration of 360-degree rotatable adjustment and the ability to switch between horizontal and vertical screen orientations.
    Figure 3.3: 360-degree rotation and screen switching.
  3. Vibration Dampening: The integrated shock absorption module effectively reduces shaking, protecting your phone from vibrations during rides.
    Diagram highlighting the shock absorption module designed to reduce phone shaking.
    Figure 3.4: Shock absorption module.
  4. Unobstructed Access: The design ensures that the charging port and camera are not obstructed, allowing full functionality of your phone while mounted.
    Image showing a phone in the holder with the charging port unobstructed.
    Figure 3.5: Unobstructed charging port.
    Image demonstrating that the phone holder does not obstruct the phone's camera.
    Figure 3.6: Unobstructed camera view.
  5. Removing Your Phone: To remove your phone, gently pull the top arm upwards and lift the phone out. It may require two hands due to the strong spring mechanism.

Product Demonstration Video

Video 3.1: Demonstrating the features and installation of the Kewig Motorcycle Phone Holder.

4. Maintenance

  • Cleaning: When not in use for a long time, clean the product with a soft, damp cloth.
  • Drying: Ensure the product is thoroughly air-dried before storage.
  • Storage: Store the phone holder in a well-ventilated, dry, and cool place.
  • Avoid: Do not expose the product to moisture, direct sunlight, or high temperatures, as these can damage the product.

5. Troubleshooting

  • Phone not secure: Ensure the phone is correctly seated within the eight claws and the arms are adjusted to the appropriate tightness for your phone's size and thickness.
  • Mount not secure on vehicle: Double-check that the alloy base is firmly tightened to the handlebar or rearview mirror stem. Ensure the anti-theft knob is engaged.
  • Excessive vibration: Verify that the shock absorption module is correctly installed and not damaged. Ensure all mounting points are tight.
  • Difficulty inserting/removing phone: The spring mechanism is strong for security. Use both hands to pull the top arm up while placing or removing the phone.

6. Specifications

Attribute Detail
Product Name Phone Holder
Model M26S
Brand kewig
Material High quality nylon, Aluminum alloy base
Phone Size Compatibility 4.7" to 7" smartphones
Max Phone Width 88mm (adjustable from 63-91mm)
Max Phone Thickness 20mm (including phone case)
Handlebar Diameter Compatibility 0.47" to 1.26" (approx. 12mm to 32mm)
Feature Vibration Dampener, Anti-Shake, 360° Rotation, Anti-Theft Knob, Unobstructed Camera/Charging Port
Wireless Charging No
Product Weight 0.5 kg
Origin Mainland China
Diagram showing phone holder dimensions: 88mm width, 20mm thickness, with silicone pad, telescopic rod, and shock absorber labels.
Figure 6.1: Key dimensions of the phone holder.
Compatibility with phone thickness less than 20mm and width less than 88mm.
Figure 6.2: Phone thickness and width compatibility.
Illustration of the phone holder's versatility, suitable for bicycles, electric scooters, and motorcycles.
Figure 6.3: Suitable for various vehicle types.

7. User Tips

  • Optimal Positioning: Utilize the articulated arm and 360-degree rotation to position your phone without blocking other controls or instruments on your vehicle.
  • Phone Size Verification: Always check your phone's dimensions, including its case, to ensure it fits within the holder's specified width (63-91mm) and thickness (max 20mm).
  • Two-Handed Operation: For secure insertion and removal of your phone, it is recommended to use both hands to manage the strong spring mechanism.
  • Vibration Protection: The built-in vibration dampener is highly effective. Ensure it is correctly installed to maximize protection for your phone on rough roads.
  • Anti-Theft Feature: Remember to engage the anti-theft knob when leaving your vehicle unattended to deter theft of the phone holder.
  • Handlebar Compatibility: Before purchasing or installing, confirm your vehicle's handlebar or rearview mirror stem diameter falls within the supported range (0.47" to 1.26").

8. Warranty & Support

For product support or warranty inquiries, please contact the manufacturer or their authorized representative:

Manufacturer Information:

Shenzhen Hongtailantian Technology Co., Ltd
B404, No.3 Xinyu Road, Xiangshan Community, Xinqiao Street, Bao'an District, Shenzhen City, Guangdong Province, China
Tel: 86-18928455821
Email: 3521000750@qq.com

EU Authorized Representative:

Apex CE Specialists GmbH
Grafenberger Allee 277, 40237 Düsseldorf, DE
Tel: 49-2118639211
Email: Info@apex-ce.com

Importer:

Shenzhen Hongtailantian Technology Co., Ltd
B404, No.3 Xinyu Road, Xiangshan Community, Xinqiao Street, Bao'an District, Shenzhen City, Guangdong Province, China

Compliance:

This product is CE compliant.

CE Mark
CE Mark
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.