1. Introduction
This manual provides essential information for the safe and effective use of Uxcell Double-Headed Hanger Bolts. These fasteners are designed for joining wooden components, featuring a wood screw thread on one end and a machine screw thread on the other. Please read all instructions carefully before installation and use.
2. Safety & Warnings
- Read all instructions before use to ensure safety and prevent damage.
- Warning: Keep small parts, such as these hanger bolts, out of reach of children under 3 years old to prevent choking hazards.
- Always wear appropriate personal protective equipment (PPE), such as safety glasses, when working with tools and fasteners.
- Ensure the work area is well-lit and clear of obstructions.
3. Product Overview
Uxcell Double-Headed Hanger Bolts are constructed from high-hardness carbon steel with a blue-white zinc-plated finish, offering excellent corrosion resistance and anti-rust capabilities for extended service life. They are ideal for various furniture applications.
Applications:
- Outdoor furniture
- Household furniture
- Stair posts
- Wooden guardrails
- Solid wood furniture
- Custom furniture
- Office furniture
4. Specifications
| Feature | Detail |
|---|---|
| Product Name | Hanger Bolt |
| Material | Carbon Steel |
| Finish | Blue White Zinc Plated |
| Main Color | Silver Blue |
| DIY Supplies Category | Metalworking |
| Available Sizes (Example) | M6x60mm, M6x70mm, M6x91mm, M8x50mm, M8x70mm, M8x79mm, M8x90mm, M10x50mm, M10x100mm, M10x117mm |
| Package Quantity | Typically 8 or 12 pieces per package (varies by SKU) |
5. Setup & Installation
- Preparation: Before using the hanger bolt, inspect it for any thread damage or bent shank. Ensure the threads are clean and free of debris.
- Pre-drilling: A pre-drilled hole is required in the wooden component before inserting the hanger bolt. The diameter of the pilot hole should be slightly smaller than the wood screw thread to ensure a secure fit without splitting the wood.
- Matching: Match the hanger bolt with the corresponding nut or hole in the component it will be attached to.
- Insertion: Carefully screw the wood screw end of the hanger bolt into the pre-drilled hole in the wooden component.
- Fastening: Use appropriate tools to fasten the hanger bolt evenly. Avoid over-tightening, as this can lead to thread stripping or shank breakage.
- Load Distribution: If necessary, add a washer to distribute the load and prevent damage to the material surface.
6. Maintenance
- For carbon steel screws used in humid or outdoor environments, apply anti-rust oil periodically to prevent corrosion.
- Regularly check installed hanger bolts for any signs of loosening or corrosion and tighten or replace as needed.
- Store unused hanger bolts in a dry, well-ventilated area, separated by specifications to maintain their condition.
7. Troubleshooting
- Bolt not fastening securely: Ensure the pilot hole size is correct for the wood screw thread. If the hole is too large, the bolt may not grip properly. If too small, it may cause wood splitting or bolt damage.
- Thread stripping during installation: This often occurs due to over-tightening or an improperly sized pilot hole. Ensure even fastening and stop when snug.
- Corrosion: If rust appears, clean the affected area and apply anti-rust oil. For outdoor or high-humidity applications, consider using stainless steel alternatives or more frequent anti-rust treatment.
8. User Tips
- Always verify the dimensions (diameter and length) of the hanger bolts before starting your project to ensure they match your requirements.
- When working with delicate wood, consider using a countersink bit for the machine screw side to prevent surface damage.
- The product is generally well-packaged, ensuring good condition upon arrival.
- Users have noted the good quality of these hanger bolts, finding them to be as described.
9. Manufacturer & Support
Manufacturer Information:
Guangzhou Dajiali Network Technology Co., Ltd.
B395, Room 106, Rulin Street, Tianhe, Guangzhou, China
Email: udb7910@126.com
EU Authorized Representative:
SUCCESS COURIER SL
CALLE RIO TORMESNUM.1, PLANTAI, DERECHAOFICINA 3Fuenlabrada, Madrid, 28947 Spain
Email: successservice2@hotmail.com
For further assistance or inquiries, please contact the manufacturer or their authorized representative using the details provided above.