NOCCLILI P3-8MM

Contents

Magnetic Double Layer Glass Window Cleaner

Model: P3-8MM

Introduction

The Magnetic Double Layer Glass Window Cleaner is designed to provide efficient and comprehensive cleaning for single-layer glass windows. Its powerful internal magnet securely holds both cleaning sides, allowing you to clean both the inside and outside of your windows simultaneously. The ergonomic triangular design ensures a comfortable grip and labor-saving operation, leaving no marks behind.

Magnetic Window Cleaner in various settings
The Magnetic Window Cleaner is suitable for various applications including bathrooms, doors, windows, and high-rise buildings.

Components

Your Magnetic Double Layer Glass Window Cleaner includes the following parts:

  • Magnetic Glass Wiper (two halves)
  • Cleaning Cotton (built-in, plus 2 extra pieces)
  • Buckles (built-in, plus 4 extra pieces)
  • Adhesive Tapes (built-in, plus 2 extra pieces)
  • 2.5m Anti-falling Safety Rope
Diagram of window cleaner components and features
Front and reverse sides of the cleaner, showing water storage sponge, cleaning cotton, and scraping strip. Also illustrates how to release water, remove cleaning pads, and the car wiper blade grade wiper strip.

Setup Instructions

  1. Attach Cleaning Cotton: Ensure the cleaning cotton pads are securely attached to both halves of the cleaner. If replacing, rotate the snap 90 degrees to remove the old pad and attach a new one.
  2. Prepare for Cleaning: Before use, soak both halves of the cleaner in water. The product requires water to activate its adsorption power and should not be used dry.
  3. Attach Safety Rope: Securely tie the 2.5m anti-falling safety rope to your wrist or a stable object to prevent the outer half of the cleaner from falling.
  4. Prevent Pinching: To avoid pinching your hands, always place the plastic interlayer between the two magnetic halves before merging them. This acts as a magnetic isolation bracket.
  5. Align Halves: Carefully align the two halves of the cleaner on opposite sides of the glass. Ensure they adhere perfectly.
Anti-pinch hand design demonstration
Correct demonstration of using the plastic interlayer to prevent pinching hands when merging the magnetic halves.
Anti-falling rope demonstration
Demonstration of wearing the anti-falling rope on the wrist for safety.

Operating Instructions

  1. Prepare Glass: Ensure the glass surface is wet. You can press the water storage sponge on the cleaner to release water onto the glass.
  2. Position Cleaner: Place one half of the cleaner on the inside of the window and the other half on the outside, ensuring they magnetically connect through the glass.
  3. Begin Cleaning: Move the inner half of the cleaner. The outer half will follow its movement, cleaning both sides of the glass simultaneously. Follow the triangular mark on the front end for proper movement.
  4. Wiping Technique: Use smooth, consistent strokes. The rubber wiper strip is designed to prevent scratching the glass.
  5. Targeted Cleaning: The triangular design allows for flexible rotation and reaches corners effectively, reducing effort and ensuring a thorough clean.
Double-sided window cleaner in action
The double-sided cleaner allows you to rub on one side and clean on both sides.
Triangular design for labor-saving cleaning
The triangular design helps reduce hand fatigue and makes cleaning more labor-saving.

Maintenance

  • Cleaning Pads: The cleaning cotton pads are replaceable. To replace, rotate the buckle 90 degrees to detach the used pad and attach a new one.
  • Wiper Strips: After each use, clean the rubber wiper strips to remove any debris or residue. This ensures optimal performance and prevents scratching.
  • Storage: Store the cleaner in a dry place. When not in use, keep the plastic interlayer between the magnetic halves to prevent them from sticking together too strongly and to protect the magnets.
Replaceable sponge wipe mechanism
The cleaning pad can be replaced by rotating the buckle 90 degrees.

Troubleshooting

  • Cleaner Not Sticking / Falling Off:
    • Ensure the glass thickness is within the recommended 3-8mm range for single-layer glass. This cleaner is not suitable for double-glazed windows.
    • Verify that both halves of the cleaner are wet before use. Dry use significantly reduces magnetic adhesion.
    • Check for proper alignment. The two halves must be perfectly aligned and adhered for optimal magnetic force.
  • Difficulty Moving Cleaner:
    • Ensure the glass surface is sufficiently wet.
    • The magnetic force is strong. If you find it too difficult to maneuver, you may need to adjust your technique or consider if the cleaner's magnetic strength is appropriate for your specific glass thickness.
  • Leaving Marks/Streaks:
    • Ensure the cleaning cotton pads are clean and free of debris. Replace them if necessary.
    • Clean the rubber wiper strips regularly.
    • Ensure the glass is adequately wet throughout the cleaning process.
  • Pinching Hands:
    • Always use the plastic interlayer when bringing the two magnetic halves together to prevent accidental pinching.

Specifications

FeatureDetail
Brand NameNOCCLILI
ModelP3-8MM
ColorBlue & Red
MaterialPlastic, Rubber, Magnet
DesignDouble-sided, Triangular
Applicable Glass Thickness3-8mm (Single Layer Glass)
Product Dimensions (L x W x H)13 cm x 13 cm x 8 cm
Product Weight0.54 kg (500g / 1.1lb)
Safety Feature2.5m Anti-falling Rope
P3-8MM model suitable for single glass
The P3-8MM model is specifically designed for ordinary single-layer glass with a thickness of 3-8mm.

User Tips

  • Magnet Strength: The magnets are powerful. If you find the cleaner too strong or hard to maneuver, practice on a smaller section of glass first. Some users have found success by carefully adjusting the number of magnets (if removable) to suit their specific glass thickness, though this is not officially recommended.
  • Wet Cleaning is Key: Always ensure the cleaning pads and glass surface are thoroughly wet. Attempting to use the cleaner dry will result in poor adhesion and ineffective cleaning.
  • Practice Makes Perfect: Maneuvering the cleaner can take some getting used to. With a little practice, you'll find the optimal technique for smooth and efficient cleaning.
  • Single-Glazed Only: This model is designed for single-layer glass (3-8mm thickness). It will not work effectively on double-glazed units, as the magnetic force is insufficient to bridge the air gap.

Warranty and Support

For any issues or questions regarding your Magnetic Double Layer Glass Window Cleaner, please contact the seller or retailer from whom you purchased the product. Keep your proof of purchase for warranty claims, if applicable.

© 2024 NOCCLILI. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.