XIAOMI MIJIA Electric Ceramic Cooktop User Manual

1. Important Safeguards and Precautions

Please read this manual carefully before use and retain it for future reference. This product is designed for household use only.

1.1 Usage Precautions

• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge.
• Do not allow children to approach, touch, play with, or use the Ceramic Cooktop.
• Use flat-bottomed, high-temperature resistant pots. Composite-bottom pots heat slowly; single-layer bottom pots are recommended for best results.
• Do not place this product in an unbalanced, humid place, or near other fire/heat sources. Ensure a distance of >30cm from heat sources.
• Before heating, ensure there is food in the pot to avoid dry burning.
• When using pots with non-insulated handles, be careful to prevent scalding.

1.2 Power Safety Warnings

• Use a dedicated power socket rated at 220V AC with a rated current of 10A or higher to prevent fire or electric shock hazards.
• Do not pull the power cord when unplugging the appliance; this may cause electric shock or short-circuit ignition.
• Keep out of reach of infants and children. Do not allow unsupervised operation.
• Never handle the plug with wet hands.
• If the power cord is damaged, it must be replaced by the manufacturer, authorized service agents, or qualified personnel.

1.3 Environmental Precautions

• Maintain a minimum clearance of 10cm from walls and furniture during use to prevent discoloration, deformation, or damage from heat.
• Ensure adequate ventilation during operation.

1.4 During Use

• Never heat sealed containers (e.g., cans) to avoid explosion risks.
• Do not place the cooker on carpets, tablecloths, or plastic films. Ensure vents remain unblocked to prevent overheating.
• Keep metal objects (knives, forks, lids, etc.) off the heating surface to prevent burns.
• Avoid placing combustibles (paper, fabric, plastic) on the cooktop.
• Overheating triggers protection mode: the heating indicator may glow intermittently.

1.5 After Use

• Regularly inspect vents to ensure unobstructed airflow.
• Surfaces remain hot post-use. Do not touch immediately. Wait until the cooling fan stops before moving the unit.

2. Product Overview

The XIAOMI MIJIA Electric Ceramic Cooktop features a sleek design with intuitive controls and multiple cooking functions.

Figure 2.1: XIAOMI MIJIA Electric Ceramic Cooktop

2.1 Components and Controls

Figure 2.2: Cooktop Components and Controls

1. Heating Area: The main cooking surface.
2. Knob: Used for turning on, adjusting power levels, and confirming selections.
3. Child Lock Button: Activates/deactivates the child safety lock.
4. Timing Button: Sets the cooking timer.
5. Display Area: Shows power level, timer, indicators, and cooking mode.
6. Air Outlet: For heat dissipation.
7. Inner/Outer Ring Switch Button: Toggles between inner, outer, and dual heating rings.
8. Cancel Button: Stops current operation or exits a menu.
9. Air Inlet: For air intake during cooling.

2.2 Display Indicators

• Child Lock Indicator Light: Illuminates when child lock is active.
• Timer Indicator Light: Illuminates when timer is set.
• High-Temperature Indicator Light: Stays on steadily when temperature exceeds 60°C.
• Hour Indicator Light: Illuminates when set time exceeds 59 minutes.
• Cooking Modes: Icons for Frying, Stew, Hot Pot, and Grill.

2.3 Power Levels

The cooktop offers 10 power levels, with approximate power output as follows:

Note: When using the inner ring or outer ring alone, Power level 1 is 100W. Maximum power is 2200W.

3. Setup

3.1 Unpacking

Figure 3.1: Package Contents

Carefully remove all items from the packaging. The package should contain:

• XIAOMI MIJIA Electric Ceramic Cooktop S1
• User Manual (Chinese Version, English version available online)
• Power Adapter (EU Adapter provided based on selection)

3.2 Placement

Place the cooktop on a stable, flat, heat-resistant surface. Ensure there is at least 10cm clearance from walls and other objects for proper ventilation.

3.3 Power Connection

Connect the Ceramic Cooktop to a dedicated 220V AC, 10A power outlet using the provided power cord and adapter. Ensure the connection is secure before use.

4. Operating Instructions

Connect the Ceramic Cooktop to power before use.

4.1 Turning On

1. After powering on, the screen defaults to Stir-fry mode. The current power level will be displayed.
2. If there is no operation within 5 minutes, the screen turns off and enters standby mode.
3. Press any button or rotate the knob to return to the cooking mode selection interface.

4.2 Cooking Mode Switching

1. Rotate the knob rightward to cycle through Stir-fry, Stew, Hotpot, and Grill modes.
2. Click the knob to confirm the desired cooking mode. The device will start cooking.
3. To exit the current cooking mode, press the Cancel button.

4.3 Adjusting Heat Level

1. During cooking, rotate the knob left or right to manually adjust the power level.
2. When the knob is rotated to Power level 0, cooking pauses.
3. The device automatically powers off after 10 minutes of no operation if paused.

4.4 Pause/Cancel Cooking

• Pause: During cooking, press the knob to pause. The digits will flash. Press the knob again to resume.
• Cancel: Press the Cancel button. The device returns to the last selected cooking mode function and gear level.
• During timing state, pausing cooking shows remaining time on screen; automatic power-off occurs after 10 minutes of no operation.

4.5 End Cooking

1. Press the Cancel button to end cooking.
2. Press and hold the knob for 3 seconds or if there is no operation for 5 minutes, the screen turns off, entering standby mode.
3. During standby, press any button to light up the screen again.
4. After the screen turns off, the cooling fan continues working for a period to cool the device. The high-temperature indicator light automatically turns off when below 60°C.

4.6 Child Lock Mode

• In standby mode, press and hold the Child Lock button for 3 seconds to activate the child lock function. The indicator light turns on.
• When child lock is enabled, press and hold the Child Lock button for 3 seconds to deactivate the child lock function. The indicator light turns off.

4.7 Timer Mode

1. In time setting state, rotating the knob slowly adjusts in 1-minute units. Rotating quickly adjusts in 10-minute units. Exceeding 1 hour, adjusts in 0.5-hour units. The 'H' indicator light turns on.
2. After selecting a cooking mode, press the knob to enter cooking state. Press the Timing button; the timer indicator light turns on, entering timer mode.
3. Rotate the knob to set the countdown duration (maximum 6 hours).
4. After setting, press the knob or wait for digits to flash for 3 seconds. A beep sounds, and the countdown starts.
5. To cancel the timer, press the Timing button again. To cancel during pause state, first enter cooking state, then press the Timing button.
6. When the countdown ends, the device stops heating and returns to the last selected cooking mode.

4.8 Specific Cooking Modes

Rotate the knob to select desired cooking function. Each mode defaults to a 2-hour working time.

• Stir-fry: Power level adjusts autonomously (default start: Gear 10).
• Stew: Power level adjusts autonomously (default start: Gear 9).
• Hotpot: Power level adjusts autonomously (default start: Gear 9).
• Grill: Power level adjusts autonomously (default start: Gear 8).

4.9 Inner/Outer Ring Mode

The device powers on defaulting to dual-ring mode.

1. In standby or cooking state, press the Inner/Outer Ring button to enter selection mode.
2. Press the Inner/Outer Ring button repeatedly to cycle through Dual-ring, Inner-ring, and Outer-ring sequences.
3. Press or rotate the knob clockwise to enter cooking state.
4. Rotate the knob to adjust the power level (adjustment unit is 1).
5. Maximum power level is 5 for inner/outer rings, and 10 for dual-ring. If the current power level exceeds Gear 5 when switching to a single ring, it automatically drops to Gear 5.

5. Maintenance and Cleaning

Before performing any cleaning, ensure the Ceramic Cooktop is disconnected from power and has cooled down completely to prevent burns.

5.1 Cleaning the Cooking Plate

It is recommended to use a soft cloth moistened with a mild detergent to wipe the cooking plate clean after cooking. This ensures a better cooking experience and a cleaner plate.

5.2 Cleaning the Air Inlets/Outlets

Use a soft brush or a mini vacuum cleaner to remove dust from the air inlets and outlets. Alternatively, gently wipe them with a soft and dry cloth.

5.3 General Cleaning Guidelines

• Do not immerse the Ceramic Cooktop in water or splash it with water.
• Do not use water to rinse the Ceramic Cooktop air inlets or outlets.
• Keep liquid and foreign objects from entering the Ceramic Cooktop.
• Do not use hard objects such as steam cleaners or steel wool balls to clean the Ceramic Cooktop.
• Avoid subjecting the unit to impacts, heavy compression, or contact with sharp objects.
• If the glass surface cracks, immediately disconnect power to prevent hazards.
• Never modify, disassemble, or attempt repairs.

6. Troubleshooting

6.1 Common Issues

6.2 Fault Codes

7. Specifications

8. User Tips

• This ceramic cooktop works with any type of cookware, not just induction-specific pots.
• Users report the device is quiet and heats up very quickly.
• The programs and timer functions are highly effective and convenient.
• While rated at 2200W, some users have observed maximum wattage around 1860W during use.

9. Warranty and Support

For further information, please visit www.mi.com.

Manufactured for: Xiaomi Communications Co., Ltd.

Manufactured by: Guangdong Chunmi Electronic Technology Co., Ltd. (a Mi Ecosystem company)

Address: Room 701-704, Building 10, Taohui Home Appliance Park, No.23 Sanle East Road, Shunjiang Community, Beijiao Town, Shunde District, Foshan City, Guangdong Province P.R. China

Made in China