1. Introduction
Thank you for choosing the FYHXele FY27QHP 27-inch QHD 165Hz Curved Gaming Monitor. This monitor is designed to provide an immersive gaming and viewing experience with its high refresh rate, fast response time, and vibrant color display. This manual will guide you through the setup, operation, and maintenance of your new monitor.
2. Safety Information
- Read all instructions carefully before using the monitor.
- Keep the monitor away from water, moisture, and extreme temperatures.
- Do not block ventilation openings.
- Use only the power adapter and cables provided by the manufacturer.
- Unplug the monitor during lightning storms or when unused for long periods.
- Refer all servicing to qualified service personnel.
3. Package Contents
Please check the package for the following items:
- Monitor
- Stand Pole
- Stand Base
- AC Adapter
- Power Cable
- DP Cable
- Screws for stand installation
- Allen Wrench
- Cat Ears (decorative accessory)
- Quick Installation Guide (this document)
4. Setup Instructions
4.1. Stand Installation
- Open the cover on the back of the monitor with a little force.
- Screw the stand pole into the monitor.
- Screw the base into the stand pole.
Attention: Do NOT press the screen to avoid damage during the installation.
4.2. Connecting the Monitor
The monitor features multiple input ports for versatile connectivity. Refer to Figure 2 for port locations.
- Power Connection: Connect the AC adapter to the monitor's power input and then to a power outlet.
- Video Input: Connect your computer or other video source to the monitor using either a DP cable (for 165Hz QHD resolution) or an HDMI cable (for up to 144Hz QHD resolution).
- Audio Output: Use the Audio Out port to connect external speakers or headphones.
- USB Port: For connecting USB devices.
Attention: Problems may occur when connecting both DP and HDMI cables to the computer at the same time. Always connect only one (DP or HDMI) to the computer.
4.3. Cat Ears Installation
The decorative cat ears can be attached to the top corners of the monitor for a personalized aesthetic. Gently slide them onto the monitor's frame until they are securely in place.
5. Operating Instructions
5.1. Power On/Off
Press the power button located on the back of the monitor to turn it on or off.
5.2. OSD Menu Button and Interface
The monitor features a diffuse button for navigating the On-Screen Display (OSD) menu. The button is typically located on the back or bottom of the monitor.
Button Hotkeys:
- Up: Open the OSD menu. Move the menu up or increase the value of the selected item.
- Down: Move the menu down or decrease the value of the selected item.
- Left: Volume.
- Right: Scene Mode.
- Press: Return or close the OSD menu.
- Long Press: Power button on/off.
5.3. OSD Menu Options
The OSD menu allows you to adjust various display settings:
| Menu Item | Description |
|---|---|
| Brightness | Adjust the display brightness (0-100). |
| Contrast | Adjust the display contrast (0-100). |
| Color Temperature | Select color temperature (Cool, Warm, User) or reset color temperature. |
| Hue | Adjust the hue (0-100). |
| Saturation | Adjust the saturation (-100 to 100). |
| Aspect Ratio | Set the display aspect ratio. |
| Language | Select OSD menu language. |
| FreeSync | Turn FreeSync function on/off. |
| HDR | Turn HDR function on/off. |
| Reset | Reset monitor configuration to factory defaults. |
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | FYHXele |
| Model | FY27QHP |
| Display Size | 27 Inches (675mm) |
| Resolution | 2560x1440 (QHD) |
| Refresh Rate | 165 Hz |
| Response Time | 1 ms (GTG) |
| Panel Type | VA (soft screen) |
| Screen Curvature | None (Note: Product images indicate 1800R curved, but specifications state 'None'. Please refer to product packaging for definitive information.) |
| Display Ratio | 16:9 |
| Brightness | 300cd/m² |
| Contrast Ratio | 3000:1 |
| Viewing Angle | 178° (Vertical & Horizontal) |
| Matrix Color Depth | 8 bit |
| High-Dynamic Range | HDR10 |
| Refresh Rate Sync Technology | Adaptive Sync |
| Interface Type | DP, HDMI, USB, Audio Out |
| Built-in Speaker | No |
| Screen Surface | MATT |
| Bracket Type | Ordinary Bracket (Tilt Adjustable) |
| VESA Mount Support | 100x100mm |
| Application | Desktop, Gaming |
| Certification | CE |
Note: Due to different production batches, the interface may be different. Please refer to the actual product.
7. Troubleshooting
If you encounter any issues with your monitor, please refer to the following common problems and solutions:
- The screen is blank:
- Press the power button to turn the monitor on.
- Confirm brightness and contrast settings are normal.
- Check if the indicator light is flashing. If so, there is no signal from your video source.
- If your source is a notebook or laptop, ensure its settings are configured for external display.
- Ensure the video device itself is powered on.
- The image is out of focus:
- Ensure the video cable is inserted properly at both ends.
- The screen is flashing:
- Try an alternative power source; insufficient power may cause this issue.
- Ensure devices such as non-shielded speakers, fluorescent lighting, AC transformers, table fans, etc., are a safe distance away from your screen to avoid magnetic disturbances.
- Unusual visual effects or color issues:
- If your screen is all red or blue, or any colors disappear, check that the cable is properly inserted. A loose connection can cause a bad signal.
- Try connecting to another video source for comparison.
- Inspect if the pins in the interface are curved.
- The screen appears scrolling, rolling, or moving unusually:
- Check that your source frequency is within 48-165Hz.
- Re-seat and ensure your video cable is secure.
- Cannot plug and play:
- Inspect if the monitor is compatible with your PC.
- Inspect if the graphics card is compatible with the monitor.
- Dim image:
- Adjust the brightness and contrast ratio in the OSD menu.
- Image jitter/noise pattern:
- Nearby electrical equipment may interfere with the monitor.
- Image position is not centered/size is not right:
- Adjust 'Clock' or use 'Auto' setting in the OSD menu.
- Cannot achieve 165Hz:
- Check if the interface cable is appropriate. The HDMI port can only reach 144Hz QHD, and the DP port can reach 165Hz QHD.
- Check whether the graphics card control panel settings are correct.
- Confirm the graphics card level.
- Update graphics drivers.
- If connected through a notebook, change the display mode to 'expansion mode' as notebook graphics cards usually output in 'copy mode' with the lowest refresh rate.
- Some options in the OSD menu are grayed out and cannot be modified or selected:
- Check if you have selected default modes (e.g., scene mode, color temperature) and change them to user-defined modes.
8. Maintenance
8.1. Cleaning the Monitor
- Ensure the monitor has been powered off before cleaning.
- Always use a soft, non-abrasive cloth when cleaning.
- Use a dry, non-abrasive cloth to gently remove debris or dust.
- If necessary, gently dampen a non-abrasive cloth with water and gently clean the surface.
- Never use alcohol or ammonia-based cleaning solutions.
- Never spray liquid directly onto any part of the monitor.
9. User Tips
- Many users report fast delivery and the product arriving in perfect condition, indicating good packaging and logistics.
- The monitor is praised for its good resolution and overall performance.
- Ensure you have the correct cables (DP for 165Hz QHD) and your graphics card drivers are up to date for optimal performance.
10. Warranty and Support
For detailed warranty information and technical support, please refer to the official documentation provided with your product or visit the manufacturer's website.
You can also refer to the comprehensive user manual in PDF format for additional details: View User Manual (PDF)
For more information, please contact us via email at support@fywele.com or visit our website at www.fyhwo.com.