Introduction
Thank you for purchasing the HOMEFISH Portable Electric Kettle. This manual provides important information for the safe and efficient use of your new appliance. Please read it thoroughly before first use and keep it for future reference.
This portable electric kettle is designed for convenience, allowing you to boil water, make tea, coffee, or warm milk on the go. Its compact size and multiple temperature settings make it ideal for travel, office, or dorm use.
Important Safety Precautions
Failure to observe these safety warnings may result in accidents, injury, or property damage. Always use the appliance responsibly.
- Do not immerse any part of this product in water or any other liquid.
- Close supervision is necessary when the appliance is used by or near children.
- Do not leave the product unattended during use.
- Unplug the product from the power outlet before cleaning or storing. Allow it to cool completely before handling.
- Do not operate the appliance if it has a damaged cord or plug, or if it malfunctions or has been damaged in any way. Return it to an authorized service center for inspection and repair.
- Keep the product away from heat sources such as electric stoves, gas stoves, or microwave ovens. Place it on a flat, stable surface when hot.
- This product is designed to heat liquids (water). Do not use it to heat solids, semi-solids, or powdered substances.
- Ensure the power cord is connected to a compatible power outlet. The kettle is available in different voltage versions (e.g., 110V or 220V-240V). Please check your specific model and plug type for compatibility.
- When boiling water at altitudes above 1200 meters, open the lid to prevent excessive pressure buildup. For altitudes below 1200 meters, the lid can remain closed.
- Do not exceed the maximum water level indicated inside the kettle to prevent boiling water from overflowing.
- Avoid dry boiling (operating without water) as this can shorten the lifespan of the electric kettle.
Product Overview and Components
Familiarize yourself with the parts of your portable electric kettle:

- Ventilation Hole: Releases steam during boiling.
- Drinking Spout: For convenient pouring.
- Carry Handle: For easy portability.
- Cup Lid: Secures contents and helps maintain temperature.
- Cup Body: The main insulated container.
- Display: Shows current temperature and settings.
- Function Buttons: For selecting desired temperature and modes.
- Power Switch: To turn the device on/off.

The kettle features a multi-layer design for safety and insulation:
- ABS Anti-Scald Shell: The outer layer designed to remain cool to the touch.
- Hollow Insulation Layer: Provides thermal insulation to keep water hot and the exterior cool.
- 304 Stainless Steel Inner Liner: Food-grade stainless steel for safe water contact.
Specifications
| Feature | Detail |
|---|---|
| Product Name | Portable Electric Kettle |
| Model | Portable Electric Kettle |
| Brand | HOMEFISH |
| Capacity | 450ml |
| Rated Power | 300W (<500W) |
| Rated Voltage | 110V or 220V-240V~ (Varies by model/plug type. Check product label.) |
| Heating Method | Plug-in Heating |
| Dimensions (approx.) | Ø76mm x 220mm (3.2in x 9.1in) |
| Weight (approx.) | 630g |
| Functions | Boil, Warm, Stew, Milk (Temperature presets: 100°C, 80°C, 55°C, 45°C) |
| Safety Features | Safety Auto-Off Function, Anti-Scald Shell |
| Origin | Mainland China |

Setup and First Use
- Initial Cleaning: Before first use, fill the kettle with water up to the maximum level. Add a small amount of mild detergent. Boil the water (select 100°C) and then discard it. Repeat this process with clean water once or twice to ensure thorough cleaning.
- Filling: Open the lid and fill the kettle with water. Do not exceed the "MAX 450ML" fill line indicated inside the kettle to prevent overflow when boiling.

Ensure water level does not exceed the MAX line. - Power Connection: Connect the power cord to the kettle's power inlet and then plug it into a compatible wall outlet.

Connecting the power cord to the kettle.
Operating Instructions
- Power On: After connecting to power, the kettle will emit a beep, and the digital display will show "--" for one second, indicating it's in standby mode.
- Temperature Selection: Touch the "TOUCH" button (function/switch button) to cycle through the temperature presets:
- First touch: 100°C (Boil)
- Second touch: 80°C (Tea/Infusion)
- Third touch: 55°C (Warm)
- Fourth touch: 45°C (Milk)

Press the TOUCH button to select your desired temperature. 
Kettle actively boiling water at 100°C. 
Kettle maintaining water at 80°C for tea infusion. 
Kettle warming milk at 45°C. - Heating Process: Once a temperature is selected, the digital temperature will flash 3 times, and the kettle will begin heating.
- Auto-Off and Keep Warm: When the water reaches the selected temperature, the kettle will beep three times and automatically enter "insulation mode" (keep warm). The display will show "bb" and maintain the temperature for 12 hours.
- Reheating/Continuous Use: If you wish to reheat or use the kettle continuously after it has entered insulation mode, allow the water to cool to 80°C or less before pressing the "TOUCH" button again to select a new temperature.
- Pouring: Carefully pour the heated liquid. The lid is designed to be leak-proof and features a double exhaust system.

Carefully pour the heated liquid.
Care and Maintenance
- Cleaning the Exterior: Ensure the kettle is unplugged and completely cool before cleaning. Wipe the exterior of the cup with a soft, damp cloth. Pay special attention to keeping the power cord plug dry.
- Descaling: Due to varying water quality, hard water can cause scale buildup over time. While generally harmless, scale can affect heating efficiency and aesthetics.
- To descale, fill the kettle with a 1:2 mixture of common food-grade descaling agent (e.g., vinegar or citric acid solution) and water.
- Boil the mixture and let it sit overnight.
- The next day, discard the mixture, rinse thoroughly, and then boil clean water once or twice to remove any residual descaling agent.
- Storage: After each use, empty any residual water from the cup. Store the kettle in a cool, dry place away from direct light.

Troubleshooting
If you encounter any issues with your kettle, please refer to the following common solutions:
- Kettle not turning on:
- Ensure the power cord is securely plugged into both the kettle and a working wall outlet.
- Check if the power outlet is functional by plugging in another appliance.
- Water overflowing during boiling:
- You may have filled the kettle above the "MAX" fill line. Always ensure the water level is below this mark.
- Kettle takes a long time to boil:
- Scale buildup can reduce heating efficiency. Refer to the "Descaling" section under Care and Maintenance.
- Ensure the kettle is not being used in an extremely cold environment.
- Kettle exterior gets hot:
- While designed with an anti-scald shell, some warmth on the exterior is normal, especially during prolonged boiling. Always handle with care.
- Kettle stops heating unexpectedly:
- The kettle has a safety auto-off function. It will stop heating once the selected temperature is reached or if it detects dry boiling.
- If it stops without reaching the desired temperature, ensure there is sufficient water and no obstructions.
If the problem persists, please contact customer support or refer to the full user manual PDF for more detailed troubleshooting steps.
User Tips
- Travel Companion: This kettle's compact size makes it an excellent travel companion for hot beverages on the go.
- Temperature Control: Utilize the specific temperature settings (80°C for tea, 45°C for milk) for optimal results with different drinks.
- Plug Compatibility: Be aware of your region's plug type and voltage. If you ordered a specific plug (e.g., US) but received a different one (e.g., 3-pin grounded type), you might need an adapter for versatility. Always ensure voltage compatibility.
- Heating Time: While efficient, allow a reasonable amount of time for the kettle to reach boiling temperature, especially for a full capacity.
- Exterior Warmth: The kettle's exterior may become warm during operation. This is normal, but always handle with care.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation included with your purchase or contact the retailer/manufacturer directly.
A comprehensive user manual is available in PDF format for download: Download User Manual (PDF)