Introduction
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your AUXITO H7 LED Headlight Bulbs. Please read this manual thoroughly before installation and keep it for future reference.
Image: AUXITO H7 LED Headlight Bulbs, showing the product and its packaging.
Safety & Warnings
- WARNING: CHOKING HAZARD – Small parts. Not for Children under 3 years.
- Always ensure the vehicle's power is off and the engine is cool before attempting installation or maintenance.
- Wear appropriate safety gear, such as gloves and eye protection, during installation.
- Do not touch the LED chips directly, as oils from your skin can reduce their lifespan.
- Ensure all connections are secure to prevent electrical issues.
Package Contents
- LED Light Bulbs (2 Pieces)
- Product Manual
- Gloves
Specifications
| Feature | Specification |
|---|---|
| LED Type | LED (7035 LED Chips) |
| Wattage | 45W/bulb |
| Lumen | 25000LM/set |
| Color Temperature | 6500K White |
| Voltage | DC 12-18V (for 12V cars only) |
| Housing Material | Aviation Aluminum |
| Waterproof Rate | IP68 |
| Working Lifetime | 50,000hrs |
| Working Temperature | -40°F ~ +176°F |
| Socket Type | H7 |
| Feature | 450% brighter than halogen bulb, with HD Spotlight Lens and cooling fan |
Image: Illustration of the HD Spotlight Lens and 7035 LED Chips, highlighting the brightness improvement.
Image: Exploded view diagram illustrating the efficient heat dissipation system, including the HD spotlight lens, single copper tube, aviation aluminum lamp body, self-contained reflector, and cooling fan.
Installation Instructions
The AUXITO H7 LED Headlight Bulbs are designed for easy installation, typically within 10 minutes. Ensure your vehicle's engine is off and cool before beginning.
For H7 Bulbs (and H11, H8, H9, 9008/H13, 9005/HB3, 9006/HB4, 9012/HIR2, H10/9145,9140)
- Remove the original bulb:
- Remove the dust cover (if present).
- Disconnect the plugs.
- Turn the bulb counter-clockwise, then take out the original bulb.
- Insert the LED bulb: Line up the tab parts of the LED bulb with the groove sections of the light housing, then insert the LED bulb.
- Secure the LED bulb: While pressing down the LED bulb, turn it clockwise until it locks in place.
- Connect the plug: Connect the electrical plug to the LED bulb.
- Test and reassemble: Power test the lights. If working correctly, put the dust cover back (if you have one).
Image: Step-by-step visual guide for installing the H7 LED headlight bulb, showing removal of old bulb, insertion of new LED bulb, and connection.
For 9003(H4) Bulbs
- Remove the original bulb:
- Remove the dust cover (if your vehicle has one).
- Disconnect the plug.
- Press down and release the buckle.
- Remove the original bulb.
- Insert the LED bulb: Line up the tab parts of the LED bulb with the groove sections of the light housing, then insert the LED bulb.
- Secure the LED bulb: Put the buckle back to secure the bulb.
- Connect the plug: Connect the electrical plug.
- Test and reassemble: Power test the lights and put the dust cover back (if you have one).
For 9004(HB1)/9007(HB5) Bulbs
- Remove the original bulb:
- Remove the dust cover (if you have).
- Disconnect the plug.
- Rotate the original bulb holder counter-clockwise and remove it.
- Remove the original bulb.
- Insert the LED bulb: Insert the bulb.
- Secure the LED bulb: Insert the vehicle's original light holder into the light housing, rotate clockwise and lock it in place.
- Connect the plug: Connect the electrical plug.
- Test and reassemble: Power test the lights and put the dust cover back (if you have).
Right/Left-Hand Drive Adjustment
The bulbs are suitable for both Left-Hand Drive and Right-Hand Drive vehicles. The factory default is Left-Hand Drive. For Right-Hand Drive, you may need to replace the right-hand drive glare shield accessory yourself.
Image: Comparison of Left-Hand Drive and Right-Hand Drive light patterns, with instructions for adjusting the glare shield for RHD vehicles.
Image: Visual comparison of light patterns, demonstrating the "perfect light pattern" of AUXITO T05 bulbs with no dark spots and no blinding to oncoming traffic, compared to halogen and lensless LED bulbs.
Operating Instructions
These LED headlight bulbs provide both high and low beam functionality, offering 6500K white light for enhanced visibility. Once installed, operate your vehicle's headlight switch as usual to toggle between low and high beams.
- Low Beam: Provides a focused light pattern for general driving, designed to illuminate the road without dazzling oncoming traffic.
- High Beam: Offers maximum illumination for driving in dark conditions where no oncoming traffic is present.
Maintenance
- Periodically check the headlight assembly for any signs of moisture or debris.
- Ensure the cooling fan on the LED bulb is free from obstructions to maintain optimal performance and lifespan.
- Clean the headlight lenses regularly with a soft cloth and appropriate cleaner to ensure maximum light output.
- Avoid using harsh chemicals or abrasive materials on the LED bulbs or headlight lenses.
Troubleshooting
Flickering/Error Warning:
For some sensitive vehicles (e.g., Jeep, Chrysler, Dodge Ram, GMC, Ford), flickering or error warnings might occur when changing to LED bulbs. Contact the manufacturer or a qualified technician for proper decoders/resistors to resolve this problem.
No Light:
- Check to make sure all wires are connected well and fuses are functioning.
- If only one bulb works, swap the left and right side bulbs to confirm if it is a CANBUS problem or a defective bulb.
Light is Dim:
Check to make sure the bulbs are locked into place and whether the LED chips are clean and intact.
Conditions Beyond Warranty Scope:
- CANBUS Problem: Some vehicles with CANBUS systems may experience issues like light flickering or error warnings. Suitable decoders may be required. If decoders do not resolve the issue, a full refund may be available.
- Installation Problem: Some vehicles may not accommodate the bulbs due to limited installation space.
- Natural Disaster: Damages caused by irresistible natural disasters (e.g., earthquake, flood) are not covered.
User Tips
- For optimal light blocking and beam pattern, consider removing any internal caps or glare shields in your headlight assembly that are only necessary for halogen bulbs.
- Many users report successful plug-and-play installation in various vehicles with standard H7 reflector housings, often without needing to replace the headlight dust cover.
- Ensure the bulbs are securely locked into place during installation to prevent dimming or improper light patterns.
- If experiencing CANBUS errors or flickering, external decoders might be necessary for your vehicle model.
Warranty & Support
AUXITO offers a 12-month warranty on its products. If you encounter any issues, please contact the seller through the platform where you purchased the product.
Steps to Get Warranty Service:
- Take a clear photo showing the code on the bottom of the lamp.
- Send the pictures to the seller. Replacements will be arranged after verification.
Image: Close-up of the LED bulb, indicating where to find the warranty code (e.g., H8/9/11 E3M 0001).
For further assistance, you may refer to the official user manual PDF: User Manual (PDF).
Compliance Information
Manufacturer: SHENZHEN TUYAO AUTO ACCESSORIES CO.,LTD
EU Authorized Representative: APEX CE SPECIALISTS LIMITED
Address: Grafenberger Allee 277, 40237 Düsseldorf, DE
Contact: Wells Yan
Email: Info@apex-ce.com
Tel: +49 21312066043
Certifications: FC CE, RoHS Compliant
Disposal Information: This appliance and its accessories are recyclable. Please dispose of them at designated collection points. Prioritize repair or donation of your device. For more information, visit www.quefairedemesdechets.fr.