1. Introduction and Important Safety Instructions
Thank you for choosing the INSE S9X Cordless Vacuum Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read it thoroughly before first use and keep it for future reference.
Important Safety Instructions
- Do not place the vacuum cleaner near heat sources, radiation, or lit cigarettes.
- Do not use the appliance to pick up the following objects:
- All liquids such as water and solvents.
- Lime, cement, ashes, and other construction dust and debris.
- Hot objects, such as cigarette butts.
- Sharp debris, such as glass shards.
- Flammable or explosive items, such as gasoline or alcoholic products.
- Do not allow children to play with or use the vacuum cleaner to prevent accidents.
- Your vacuum cleaner is an electrical appliance; it must not be used improperly.
- Do not leave the vacuum cleaner running unattended.
- The appliance must be switched off during cleaning, maintenance, or storage.
- Do not pull the power plug to turn off the vacuum cleaner. Hold the plastic part of the plug to remove it from the power outlet.
- The power supply voltage must match the charging voltage of the vacuum cleaner.
- To prevent fires, do not immerse vacuum cleaners in water or expose them to heating appliances.
- Do not drag the power cord when moving the charging station.
- In the following cases, do not use the vacuum cleaner and send it immediately to the nearest authorized service center:
- The vacuum cleaner has fallen and been damaged.
- The power cord is damaged.
- Stop using the vacuum cleaner if the suction inlet is blocked to prevent damage (such as overheating) to the motor or deformation of the plastic part of the vacuum cleaner caused by motor overheating.
2. Product Components and Diagram
Familiarize yourself with the parts of your INSE S9X vacuum cleaner.
Parts List

Main Unit & Accessories
- Retractable Metal Tube x1
- Main Motor x1
- Motorized Cleaning Brush x1
- Wall Mount x1
- Adapter x1
- Soft Roller Brush x1
- V-shaped Rubber Brush x1
- Battery x1
- Long Crevice Tool x1
- 2-in-1 Brush x1
- 2-in-1 Cleaning Gadget x1
- HEPA Filter x1
- User Manual x1
- Quick Start Guide x1
Product Diagram
Figure 2.1: Main unit and accessories of the INSE S9X Cordless Vacuum Cleaner.
- LED Display (shows battery indicators, power mode indicators, auto dust detection mode)
- Mode Switch
- Battery
- Battery Release Button
- Anti-static Column
- Power Switch
- Filtration System
- Dust Box
- Dust Box Release Button
- Color Breathing Light
- Main Motor Release Button
- Retractable Metal Tube
- Telescopic Adjustment Part
- Cleaning Brush Release Button
- Brush Change Button
- Motorized Cleaning Brush
- LED Lights
3. Product Specifications
| Feature | Specification |
|---|---|
| Model No. | S9X |
| Operating Power | 400W |
| Motor Type | Brushless Motor |
| Suction Power | 150 AW |
| Suction Pressure | 45,000 Pa |
| Adapter Input | 100-240V~50/60Hz |
| Adapter Output | 31V 500mA |
| Charging Time | 4.5 hours |
| Dust Bin Capacity | 1L |
| Battery Cells | 7 cells |
| Battery Capacity | 2000mAh |
| Operating Voltage | 25.9V |
| Net Weight (main motor, battery, metal tube, cleaning head, V-shaped rubber brush) | 2.89kg |
| Product Weight (with all accessories) | 4.3kg |
| Package Dimensions | 43.9 x 33 x 19 cm |
| Suction Modes | AUTO, Eco, Medium, High |
| Number of Nozzles | 1-3 nozzles |
| Number of Operating Modes | 1-2 |
| Filter Type | Other |
| LCD Display | No |
| Cleaning Route | Random Type |
| Bag or Bagless | Bagless |
| Cord Length | Wireless |
| Timing Reservation | No |
| Special Suction Nozzle | Crevice Nozzle |
| Dust Storage Type | Dust Box |
| Installation | Hand Held |
| Certification | CE |
| Function | Dry |
| Origin | Mainland China |
| Remote Control | No |
Figure 3.1: High-performance 400W Brushless Motor with 45,000 Pa suction pressure.
Figure 3.2: Battery specifications.
4. Assembly and Combination
The vacuum cleaner must be installed correctly, with a clear click at each step, to avoid air circulation problems or malfunctions.
To disassemble the vacuum cleaner, simply press the release button of each part.
Figure 4.1: The 2-in-1 Floor & Carpet Brush adapts to different surfaces.
Figure 4.2: Disassembly and installation of the brush head.
5. Charging Instructions
- Please fully charge the battery before first use, as the product is shipped uncharged for safety reasons.
- Please use the original charger. It takes approximately 4 to 4.5 hours to fully charge the battery.
- For safety reasons, the vacuum cleaner cannot be turned on during charging.
Charging Methods
Insert the power plug into the charging port; connect the power adapter to the power source.
Figure 5.1: Charging while mounted on the wall.
Figure 5.2: Detachable battery charging separately.
During Charging
The battery indicator lights show the amount of electricity in the battery during charging. The light turns off after about an hour when it is fully charged.
The color of the ring light changes with battery power:
- Blue: 75-100%
- Purple: 40-74%
- Red: 0-39%
The light turns off after about an hour when the battery is fully charged.
Figure 5.3: LED Display and Ring Light Battery Indicators.
6. Operation
Power ON/OFF
Press the power switch once to turn on the vacuum cleaner, press it twice to turn it off.
Mode Switching
The LED screen clearly shows battery levels and power modes.
Press the mode switch to cycle through the suction modes:
- One press: Eco Mode (up to 55 minutes runtime)
- Two presses: Medium Mode (up to 25 minutes runtime)
- Three presses: High Mode (up to 13 minutes runtime)
Auto Mode: The vacuum cleaner can automatically adjust suction power based on the debris level detected by the infrared sensor. This may take a few seconds as dust needs to enter the main motor to trigger the sensor.
Figure 6.1: Smart Cleaning with automatic adjustment according to the working environment.
Figure 6.2: Intelligent LED Display showing battery status and current mode.
LED Display and Ring Light
The LED display shows the battery percentage and current operating mode. The color of the ring light indicates the battery power:
- Blue: 75-100% battery
- Purple: 40-74% battery
- Red: 0-39% battery
Note: The light flashes red when the battery level is below 10%.
Figure 6.3: LED display showing 100% battery.
Figure 6.4: Blue ring light indicating high battery.
7. Maintenance and Cleaning
Emptying the Dust Bin
Ensure that the amount of debris does not exceed the MAX line. Empty the dust bin after each use.
- Press the dust box release button.
- Empty the contents into a trash can.
Figure 7.1: Dust bin with debris, indicating the MAX fill line.
Cleaning the Cyclonic Filter and HEPA Filter
Regular cleaning of the filters is crucial for maintaining optimal suction performance.
- Remove the multi-stage cyclonic separation accessory.
- Remove the HEPA filter.
- Brush the HEPA filter to remove dust (do not wash the HEPA filter with water).
- Rinse the strainer and cyclone with cold water.
- Ensure the strainer and cyclone are completely dry before reassembling.
Note:
- Never use the vacuum cleaner without all filters installed.
- Replace the HEPA filter according to your frequency of use to better maintain suction.
Figure 7.2: The 5-stage high-efficiency filtration system components.
Figure 7.3: Cleaning instructions for filters. Note: HEPA filter cannot be washed.
Replacing the Roller Brush
The vacuum cleaner comes with two brushes. Use the specific brush according to your cleaning needs.
- The V-shaped rubber brush is better suited for low and medium pile carpets and hard floors.
- The soft roller brush is more suitable for hard floors and perfectly protects your hardwood floor.
- Press and hold the button on the brush head.
- Remove the V-shaped rubber brush.
- Install the soft roller brush.
Figure 7.4: Soft roller brush for hard floors.
Figure 7.5: V-shaped rubber roller for carpets (no tangle design).
8. Storage
Wall Mount Installation
To store your vacuum cleaner conveniently, you can install the provided wall mount.
- Tear off the adhesive tape from the wall mount and fix it to the wall.
- Drill two holes in the wall at the marked positions.
- Insert the screws into the plastic casing.
- Nail the wall mount to the wall using the screws.
Figure 8.1: Wall mount for convenient storage.
9. Troubleshooting
If the solutions below do not resolve the problem or if the problem encountered is not listed, please contact us at help@inselife.com.
Q1. The machine does not work.
- A1. The battery is low or not powered.
- Please use the original adapter to charge the battery. It usually takes 4 to 4.5 hours to fully charge it.
- A2. The accessory is blocked.
- Check and clear any obstruction in the accessories. Clean all filters if necessary.
Q2. The machine has no suction power.
- A1. The dust bin is full.
- Empty the dust bin after use to prevent accumulation.
- A2. The filters are clogged.
- Clean all filters and install them until they are perfectly dry. Replace the HEPA filter if it can no longer filter dust.
- A3. The accessory is blocked.
- Check and clear any obstructions in the accessories.
Q3. The roller brush stops rotating.
- A1. The roller brush is tangled in something.
- The color breathing light turns red and the brush alert indicator turns red. Please remove the tangle.
- A2. There is a problem with the metal tube or the motorized cleaning head.
- Please contact our after-sales service.
Q4. Abnormal sound.
- A1. The accessory is blocked.
- Check and clear any blockages in the accessories.
- A2. There is a problem with the main motor or the motorized duck head.
- Please contact our after-sales service.
Q5. Flashing fault indicator on the LED display.
- "E1" indicator flashing: Overheat protection.
- Check and clear any blockages in the accessories.
- Check and clean all filters.
- "E2" indicator flashing: Abnormal voltage.
- Check and use the original charger.
- "EE" Twinkle indicator: Brush tangle.
- Remove tangles from the brush.
10. User Tips
- The INSE S9X is highly effective at removing pet hair from carpets and hard floors.
- Utilize the green LED light on the brush head to illuminate dust and pet hair, making it easier to see what you're cleaning.
- The detachable battery allows for flexible charging options, either directly on the vacuum or separately.
- Its lightweight and maneuverable design makes it ideal for quick clean-ups, reaching under furniture, and even cleaning car interiors.
- The dust container is generously sized, reducing the frequency of emptying during cleaning sessions.
- Remember that the HEPA filter is not washable; consider having spare filters on hand for replacement to maintain optimal performance.
- Be aware that the charging cord plugs directly into the vacuum cleaner, not the wall mount, which means you'll need to unplug it before use if it's charging on the mount.
11. Warranty and Support
For any warranty claims, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your proof of purchase for warranty validation.
You can also reach out to our support team at help@inselife.com for assistance.
Video 11.1: Product overview and demonstration of features.