1. Introduction
This EZAIOT series of thermostats is designed for various floor heating applications. The Wi-Fi version offers remote control via smartphone and voice commands through smart assistants like Amazon Alexa and Google Home. Featuring built-in temperature sensors and weekly programming, it allows for precise and comfortable temperature regulation.
Key Features:
- Intelligent capacitive touch screen with glass panel.
- Diverse programming options with up to 6 heating events per day.
- Fashionable tempered glass design.
- Precise temperature setting (0.5°C increments).
- Compatible with Electric Heating, Water Heating, and Boiler Heating systems.

Figure 1: EZAIOT Thermostat with Smart Home Integration (Thermostat, Mobile App, Alexa, Google Home)
Product Overview by Model
| Function | Model | Application |
|---|---|---|
| Floor heating | 716 | External sensor + Weekly programming + 16A max |
| 703 | External sensor(optional) + Weekly programming + 3A max | |
| 723 | Passive linkage control + Weekly programming + 3A max |
Display Symbols
- Wi-Fi config: Wi-Fi connection status.
- Manual Mode: Indicates manual control.
- Auto Mode: Indicates automatic program control.
- ECO Mode: Energy-saving mode.
- Week day: Current day of the week.
- Wake up (Event 1), Leave (am) (Event 2), Return (am) (Event 3), Leave (pm) (Event 4), Return (pm) (Event 5), Sleep (Event 6): Programming event indicators.
- Setpoint Temperature / Clock: Desired temperature or current time.
- Minus (-): Decrease value.
- RT Sensing Temperature: Current room temperature.
- Plus (+): Increase value.
- FT Setpoint Temperature: Floor temperature setpoint.
- Built-in (Room) Sensor: Indicates internal sensor is active.
- SSS Heating on: Indicates heating is active.
- External (Floor) Sensor: Indicates external floor sensor is active.
- Child-lock: Indicates child lock is active.
- Frost Protection: Indicates frost protection is active.
2. Setup Instructions
2.1. Dimensions
Unit: mm

Figure 2: Thermostat Dimensions (86.5mm x 86.5mm front, 13.1mm + 32.6mm depth)
2.2. Mounting Steps
The thermostat features a pre-guide and limited snap-fit design for easy installation.
- Release Front Cover: Insert a head screwdriver into the bottom crack of the thermostat and gently pry to release the front cover.
- Connect Wires: Connect the electrical wires to the terminal block according to the wiring diagram provided in section 2.3. Suggested copper wire length is 7-9mm.
- Attach Thermostat Base: Secure the thermostat base to the wall-cassette using two mounting screws. Ensure there is no deformation on the thermostat after attachment. Recommended torque is 0.2-0.4 N.m (2.0-4.1 kgf.cm).
- Re-mount Front Cover: Align the front cover and snap it back into place until it clicks securely.
2.3. Wiring Diagram
Important: The thermostat operates at full capacity below 2500m altitude. For altitudes between 2500m and 4200m, the power rating of the external load should not exceed 80% of the thermostat's rated power.

Figure 3: Wiring Diagram for Thermostat Models 716 and 723
Model #716 (16A Max):
- Terminal 1 (L): Live wire (AC 230V)
- Terminal 2 (N): Neutral wire (AC 230V)
- Terminal 3 (N1): Neutral connection for heating load
- Terminal 4 (L1): Live connection for heating load (16A Max)
- Terminal 5, 6 (NTC): External sensor connection
- Terminal 7: Not used
Model #723 (3A Max):
- Terminal 1 (L): Live wire (AC 230V)
- Terminal 2 (N): Neutral wire (AC 230V)
- Terminal 3 (L1): Live connection for electric actuator or electrical ball valve (3A Max)
- Terminal 4 (COM): Common terminal for boiler control (dry contact signal)
- Terminal 5 (NO): Normally Open terminal for boiler control (dry contact signal)
- Terminal 6 (NTC1): External sensor connection
- Terminal 7 (NTC2): External sensor connection
Note: Delay time of linkage control is adjustable for Model #723.
2.4. Wi-Fi Configuration (Wi-Fi version only)
To connect your thermostat to Wi-Fi:
- Ensure the thermostat is powered off.
- Press and hold the Wi-Fi icon on the thermostat for 3 seconds. The Wi-Fi indicator will start blinking.
- Open the Tuya Smart or Smart Life app on your smartphone.
- Follow the in-app instructions to add a new device. The app will guide you through connecting the thermostat to your home Wi-Fi network.
3. Operating Instructions
3.1. Power On/Off
Press the Power button (O) shortly to turn the thermostat on or off.
3.2. Time Setting
- Press and hold the Mode button (M) for 3 seconds to enter time setting mode.
- Press the Mode button (M) again to select the item you wish to modify (week day, hour, minute).
- Use the Plus (+) or Minus (-) buttons to adjust the value.
- Press the Power button (O) shortly to confirm and exit.
3.3. Temperature Setting
In normal operating mode, press the Plus (+) or Minus (-) buttons to increase or decrease the setpoint temperature by 0.5°C increments.
3.4. Child-lock
To activate or deactivate the child-lock function:
- Press and hold both the Plus (+) and Minus (-) buttons simultaneously for 3 seconds.
- The thermostat display will show a lock icon when activated, indicating that the controls are locked. Repeat the process to unlock.
3.5. Temperature Control Mode
Press the Mode button (M) shortly to switch between Manual Mode and Auto Mode.
- Manual Mode: The temperature is controlled according to the current set temperature, which you adjust using the Plus (+) or Minus (-) buttons. This setting remains active until manually changed again.
- Auto Mode: The temperature is controlled according to the set weekly heating profile. Any manual temperature adjustments made in Auto Mode will be temporary, active only until the next programmed event occurs. The display will show a