1. Introduction
Thank you for choosing the Sacroiliac SI Joint Hip Belt. This manual provides essential information for the safe and effective use of your new hip belt. Designed to offer support and stability to the sacroiliac joint and lower back, this belt can help alleviate discomfort associated with various conditions, including sciatica, pelvic instability, and general lower back pain. Please read these instructions carefully before first use and retain them for future reference.
2. Safety Information
- Consult a healthcare professional before using this product if you have any pre-existing medical conditions, are pregnant, or have recently undergone surgery.
- Do not overtighten the belt, as this may restrict circulation or cause discomfort.
- Discontinue use immediately if you experience increased pain, numbness, tingling, or any adverse reactions.
- This product is not a substitute for medical diagnosis or treatment. Always follow your doctor's recommendations.
- Keep out of reach of children.
3. Package Contents
- 1 x Sacroiliac SI Joint Hip Belt
4. Product Overview
The Sacroiliac SI Joint Hip Belt is designed for comfortable and effective support. It features a main wide belt and two adjustable elastic straps for customized compression. The belt is made from a composite material, including cotton and polyester, ensuring durability and breathability.


5. Setup & Installation
Follow these steps to correctly wear your Sacroiliac SI Joint Hip Belt:
- Position the Main Belt: Wrap the main, wider part of the belt around your hips, ensuring it sits comfortably below your waistline and directly over your sacroiliac joints. The belt should be centered on your lower back.
- Secure the Main Belt: Fasten the main belt using the primary closure mechanism (typically hook-and-loop fasteners) at the front. It should feel snug but not overly tight.
- Adjust Elastic Straps: Take the two thinner elastic straps, one from each side of the main belt. Pull them forward and cross them over the front of your body.
- Fasten Elastic Straps: Secure the elastic straps to the front of the main belt using their respective hook-and-loop fasteners. Adjust the tension of these straps to achieve your desired level of compression and support.
- Check Comfort: Ensure the belt is comfortable and allows for a full range of motion without digging into your skin or causing discomfort. Adjust as needed.



Video Demonstration
Video 1: A person demonstrates the step-by-step process of wearing and adjusting the Sacroiliac SI Joint Hip Belt for optimal fit and support.
6. Operating Instructions
Once the belt is properly fitted, you can wear it during daily activities, exercise, or as recommended by your healthcare provider. The adjustable straps allow you to customize the level of compression. For optimal results, ensure the belt provides firm but comfortable support without causing any pain or restricting movement.
7. Maintenance
To ensure the longevity and hygiene of your SI Joint Hip Belt, please follow these care instructions:
- Hand Wash: Gently hand wash the belt in cold water with mild soap.
- Air Dry: Lay flat to air dry completely. Do not tumble dry.
- Do Not Bleach: Avoid using bleach or harsh detergents, as these can damage the material.
- Do Not Iron: Ironing is not recommended.
- Storage: Store in a cool, dry place away from direct sunlight.
8. Troubleshooting
Common Issues and Solutions:
- Belt feels uncomfortable or too tight: Loosen the main belt and elastic straps. Re-adjust to a comfortable tension that still provides support. Ensure the belt is not twisted.
- Belt does not provide enough support: Tighten the elastic straps gradually until you feel adequate support. Ensure the main belt is positioned correctly over your sacroiliac joints.
- Belt slides or bunches up: Ensure the belt is snug enough to prevent movement. Check if you have selected the correct size for your hip circumference.
- Skin irritation: Ensure the belt is clean and dry before wearing. If irritation persists, discontinue use and consult a healthcare professional.
9. Specifications
| Feature | Detail |
|---|---|
| Item Type | Braces & Supports |
| Model Number | Support Brace Belt |
| Application | Back |
| Effect | Bone Care |
| Material | Composite Material (Cotton, Polyester) |
| Color | Black |
| Width | 9 cm / 3.54 inch |
| Size M (Length) | 105 cm / 41.3 inch (Suitable for hip circumference 80-105 cm / 31.5-41.3 inch) |
| Size L (Length) | 130 cm / 51.2 inch (Suitable for hip circumference 105-130 cm / 41.3-51.2 inch) |
| Batteries Included | No |
| High-concerned chemical | None |
| Number of Pieces | One Unit |
| Origin | Mainland China |

10. User Tips
- Proper Sizing: Always refer to the size chart and measure your hip circumference to select the most appropriate size for effective support and comfort.
- Gradual Adjustment: When first using the belt, start with a looser fit and gradually increase the tension of the elastic straps as your body adapts and you find the optimal level of support.
- Layering: For sensitive skin, consider wearing the belt over a thin layer of clothing to prevent direct contact and potential irritation.
11. Warranty & Support
For specific warranty information and customer support, please refer to the seller or the platform where the product was purchased. Additional guidance may be available in the official user manual PDF, which can be referenced here.