XIAOMI MIJIA Electric Ceramic Cooktop MDTL001CM User Manual

1. Safety Precautions

Read this manual carefully before use, and retain it for future reference. This product is for household use only.

General Safety Warnings

• CAUTION: Hot surface. The cooking plate of the Ceramic Stove will get hot during use. Do not touch it to prevent burns.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge.
• Do not allow children to approach, touch, play with or use the Ceramic Stove.
• Keep out of reach of infants and children. Do not allow unsupervised operation to avoid risks of electric shock, burns, or other injuries.
• Never handle the plug with wet hands to prevent electric shock or personal injury.
• This appliance must not be operated via external controllers or standalone remote-control systems.
• If the power cord is damaged, it must be replaced by the manufacturer, authorized service agents, or qualified personnel to avoid hazards.

Usage Restrictions

• Please use flat-bottomed, high-temperature resistant pots. Composite-bottom pots (such as pots for induction cookers) heat slowly, and it is recommended to use pots with single-layer bottoms to achieve the best fire effect.
• Do not place this product in an unbalanced, humid place or near other fire or heat sources (make sure the distance between this product and the fire or heat source is >30cm).
• Before heating the pot, make sure there is food in the pot to avoid dry burning of the empty pot.
• When using pots with non-insulated handles, be careful to prevent scalding.
• Never heat sealed containers (e.g., cans) to avoid explosion risks from pressure buildup.
• Do not place the cooker on carpets, tablecloths, or plastic films. Ensure vents remain unblocked to prevent overheating.
• Keep metal objects (knives, forks, lids, etc.) off the heating surface to prevent burns from heated items.
• Avoid placing combustibles (paper, fabric, plastic) on the cooktop to eliminate fire hazards.

Power Safety Warnings

• Use a dedicated power socket rated at 220V AC with a rated current of 10A or higher to prevent fire or electric shock hazards.
• Do not pull the power cord when unplugging the appliance, as this may cause electric shock or short-circuit ignition.

Environmental Precautions

• Maintain a minimum clearance of 10cm from walls and furniture during use, as heat may cause discoloration, deformation, or damage.
• Ensure adequate ventilation during operation to guarantee proper heat dissipation.

After Use

• Regularly inspect vents to ensure unobstructed airflow.
• Surfaces remain hot post-use: Do not touch immediately. Wait until the cooling fan stops before moving the unit.

2. Product Overview

The XIAOMI MIJIA Electric Ceramic Cooktop features a sleek design with intuitive controls and flexible heating options.

Image: Diagram showing the various components and indicators of the cooktop.

Components and Indicators:

• Heating area: The main cooking surface.
• Knob: For power adjustment and selection.
• Child lock button: Activates/deactivates child safety lock.
• Timing button: Sets the cooking timer.
• Display area: Shows power level, timer, and mode.
• Air outlet: For heat dissipation.
• Inner/outer ring switch button: Toggles between heating zones.
• Cancel button: Stops current operation.
• Air inlet: For air circulation.
• Child lock indicator: Lights up when child lock is active.
• Timing indicator: Lights up when timer is active.
• High temperature indicator: Lights up when surface temperature exceeds 60°C.
• Hour indicator: Lights up when timer exceeds 59 minutes.
• Menu mode: Displays current cooking function (Frying, Stew, Hot pot, Grill).

Power Level Display:

Note: When using the inner ring or outer ring alone, Power level 1 is 100W. 2200W is the rated power.

3. Setup

Unpacking and Initial Inspection

Carefully remove all packaging materials. Inspect the cooktop for any signs of damage. If any damage is found, do not use the appliance and contact customer support.

Image: Package contents including the cooktop, user manual, and various plug adapters (EU, AU, UK, US).

Plug Adapter

The product is a Chinese version and comes with a suitable adapter for your region (EU, AU, UK, or US) based on your selection. Ensure the correct adapter is securely attached before plugging into a power outlet.

First Use

The Ceramic Stove may have a burning smell when used for the first time. This is caused by the evaporation of the protective oil of the heating element. Please use it with confidence; you can also burn it empty for 5-10 minutes to remove the odor of the new machine.

4. Operating Instructions

Connect the Ceramic Stove to power before use.

4.1. Turning On

1. After the ceramic stove is powered, the screen defaults to Stir-fry mode. The Power level displays the current gear level in this mode.
2. If there is no operation within 5 minutes, the screen turns off and enters standby mode. Press any button or rotate the knob to return to the cooking mode selection interface.

4.2. Cooking Mode Switching

1. Rotate the "Knob" rightward to cycle through Stir-fry/Stew/Hotpot/Grill in sequence.
2. Click the "Knob" to confirm the cooking mode, and the device starts cooking.
3. To exit the current cooking mode, press the "Cancel" button.

4.3. Adjusting Heat Level

1. During cooking, rotate the "Knob" left or right to manually adjust the Power level.
2. When the knob is rotated to Power level 0, cooking pauses in this mode. The device automatically powers off after 10 minutes of no operation.

4.4. Pause/Cancel Cooking

1. During cooking, press the "Knob" to pause cooking, the digits keep flashing; press the "Knob" again to resume cooking.
2. After pressing Cancel, the device returns to the last selected cooking mode function and gear level.
3. During timing state, pausing cooking shows remaining time on screen; automatic power-off occurs after 10 minutes of no operation.

4.5. End Cooking

1. Press "Cancel" to end cooking.
2. Press and hold the knob for 3 seconds or no operation for 5 minutes, the screen turns off entering standby mode. During standby, press any button to light up the screen again.
3. After screen turns off, the cooling fan continues working for a period to cool the device; the high-temperature Indicator light automatically turns off when below 60°C.

4.6. Timer Mode

1. After selecting cooking mode, press the "Timer" button. The timer indicator light turns on, entering timer mode.
2. Rotate the "Knob" to set countdown duration.
   • Slow rotation: adjusts in 1-minute units.
   • Quick rotation: adjusts in 10-minute units.
   • Exceeding 1 hour: adjusts in 0.5-hour units, "H" indicator light turns on.
   • Maximum timer is 6 hours.
3. After setting duration, press the knob or wait for digits to flash for 3 seconds, a beep sounds, countdown starts.
4. To cancel timer, press the "Timer" button again. To cancel timer during pause state, first enter cooking state, then press the "Timer" button.
5. In timer state, timer interface and cooking interface cycle display. Timer interface displays remaining time and timer icon. Cooking interface displays heat gear level and selected cooking mode.

4.7. Specific Cooking Modes

Rotate the "Knob" left or right to select desired cooking function. Press the "Knob" to confirm mode, device starts cooking. Each mode defaults to 2-hour working time.

• Stir-fry: Power level adjusts autonomously per cooking needs (default start: Gear 10).
• Stew: Power level adjusts autonomously per cooking needs (default start: Gear 9).
• Hotpot: Power level adjusts autonomously per cooking needs (default start: Gear 9).
• Grill: Power level adjusts autonomously per cooking needs (default start: Gear 8).

4.8. Inner/Outer Ring Mode

Image: Visual representation of inner ring (focused low heat), outer ring (gentle even heat), and dual ring (powerful high heat) heating zones.

1. Device powers on defaulting to dual-ring mode, screen displays Power level gear.
2. In standby or cooking state, press the "Inner/Outer Ring" button to enter Inner/Outer Ring selection mode.
3. After pressing "Inner/Outer Ring" button to select mode, press or rotate the "Knob" clockwise to enter cooking state.
4. Repeatedly pressing "Inner/Outer Ring" button cycles through Dual-ring/Inner-ring/Outer-ring sequences. In standby state, Power level defaults to Gear 1 after Inner/Outer Ring selection.
5. Rotate the "Knob" to adjust Power level, adjustment unit is 1. Maximum Power level: 5 for inner/outer rings, 10 for dual-ring. If current Power level exceeds Gear 5, selecting inner/outer ring automatically drops gear to 5.

4.9. Child Lock Mode

1. In standby mode, press and hold the "Child Lock" button for 3 seconds to activate the child lock function, the indicator light turns on.
2. When child lock is enabled, press and hold the "Child Lock" button for 3 seconds to deactivate the child lock function, the indicator light turns off.

5. Care & Maintenance

Before performing the following operations, make sure the Ceramic Stove is disconnected from power and cools down to prevent burns.

Cleaning the Cooking Plate

• Ensure that the Ceramic Stove is disconnected from power and then clean the cooking plate after it cools down.
• Do not immerse the Ceramic Stove in water or splash it with water.
• Keep liquid and foreign objects from entering the Ceramic Stove and make sure it is clean.
• Do not use hard objects such as steam cleaners or steel wool balls to clean the Ceramic Stove.
• Use a soft cloth moistened with a mild detergent to wipe the grease from the cooking plate. Do not use bleach or corrosive liquids for cleaning.

Cleaning Air Inlets/Outlets

• Do not use water to rinse the Ceramic Stove air inlets or outlets.
• To remove dust, use a soft and dry cloth, a soft brush, or a mini vacuum cleaner to clean the air inlets and outlets.

Storage

• After cleaning, use a soft and dry cloth to wipe the Ceramic Stove to keep it dry.
• When planning not to use the Ceramic Stove for a long time, unplug it and take measures to protect it from moisture, dust, and household pests.

6. Troubleshooting

Malfunctions & Abnormalities

• In case of malfunction: Immediately discontinue use and unplug. Only allow qualified personnel to perform repairs after full cooling.
• Power cord or plug overheats during operation.
• Smoke emission or distinct burnt smell detected from the cooker.
• Cracking, loosening, or abnormal noises in any component.
• Other operational irregularities.
• WARNING: If the glass surface cracks, immediately disconnect power to prevent hazards.
• Never modify, disassemble, or attempt repairs to avoid fire, electric shock, or burns.

Common Issues

Fault Codes

7. Specifications

8. User Tips

• The 6-hour timer function is highly versatile and useful for various cooking tasks, such as brewing herbal tea.
• The control panel and included manual are in Chinese. For understanding, it is recommended to use translation applications like Papago or Google Translate.
• The cooktop offers flexible heating with inner, outer, and dual ring options, allowing for precise heat control for different dishes.

9. Warranty & Support

For warranty information and customer support, please refer to the official XIAOMI website or contact your retailer. Keep your proof of purchase for any warranty claims.

Manufactured for: Xiaomi Communications Co., Ltd.

Manufactured by: Guangdong Chunmi Electronic Technology Co., Ltd. (a Mi Ecosystem company)

For further information, please go to www.mi.com