1. Product Overview
Thank you for choosing the Xiaomi Automatic Touchless Foaming Soap Dispenser. This device provides a hygienic and convenient way to dispense soap, suitable for kitchens and bathrooms. It features a smart infrared sensor, adjustable dispensing levels, and a rechargeable battery.

Image 1: Xiaomi Foaming Soap Dispenser (White version) with USB-C cable and wall mounts.
2. Package Contents
Please check the package for the following items:
- Automatic Soap Dispenser (Foam or Liquid version)
- USB-C Charging Cable
- Wall Mounting Hooks (2 pieces)
- User Manual (this document and the included printed version)
3. Setup Instructions
3.1 Charging the Device
- Locate the USB-C charging port on the device.
- Connect the provided USB-C cable to the dispenser and the other end to a standard USB power adapter (not included).
- The display will indicate charging status. A full charge is recommended before first use.
3.2 Preparing the Soap
The dispenser is compatible with various types of soap. Proper preparation ensures optimal performance:
- For Foam Soap: Pour directly into the soap tank. No dilution is required.
- For Ordinary Liquid Soap: Dilute with water at a ratio of 1 part soap to 3-4 parts water. Mix gently to ensure proper consistency for foaming.

Image 2: Guide for preparing soap. Foam soap can be poured directly. Liquid soap should be diluted 1:3-4 with water.
3.3 Filling the Dispenser
- Twist the top section of the dispenser counter-clockwise to remove it from the soap tank.
- Carefully pour the prepared soap solution into the 420ml visual tank. Do not overfill.
- Align the top section with the tank and twist clockwise to secure it.
3.4 Placement Options
The dispenser can be used in two ways:
- Countertop Use: Simply place the dispenser on any flat, stable surface.
- Wall-Mounted Use:
- Clean and dry the desired wall surface thoroughly.
- Peel off the protective film from the back of the adhesive wall mounting hooks.
- Press the hooks firmly onto the wall, ensuring no air bubbles. Wait for at least 24 hours for maximum adhesion.
- Align the dispenser with the hooks and slide it down to secure it in place.

Image 3: Dispenser shown both wall-mounted and standing on a countertop.
4. Operating Instructions
4.1 Power On/Off
- To power on, press and hold the power button (usually indicated by a circle with a vertical line) on the top of the dispenser until the display lights up.
- To power off, press and hold the power button again until the display turns off.
4.2 Dispensing Soap
- Ensure the dispenser is powered on.
- Place your hand under the nozzle. The quick infrared sensor will detect your hand.
- The dispenser will automatically dispense a measured amount of foam or liquid soap.
4.3 Adjusting Dispensing Levels
This dispenser features 4 adjustable dispensing levels. While powered on, short press the power button to cycle through the different volume settings. The display may indicate the current level or a visual representation of the dispensed amount.
4.4 Battery Indicator
The integrated display shows the current battery percentage, allowing you to know when recharging is needed.
5. Maintenance
5.1 Cleaning the Dispenser
- Wipe the exterior of the dispenser with a soft, damp cloth. Do not use abrasive cleaners or immerse the entire unit in water.
- The dispenser features a self-cleaning anti-clogging mechanism for the internal pump. If the nozzle appears clogged, try dispensing a few times or run warm water through the system (by dispensing water) if safe to do so.
5.2 Refilling Soap
When the soap level in the visual tank is low, follow the instructions in Section 3.3 to refill.
5.3 Waterproofing
The device is IPX5 waterproof, meaning it is protected against low-pressure water jets from any direction. This makes it suitable for bathroom and kitchen environments. However, it should not be submerged in water.

Image 4: Highlights IPX5 waterproof rating, quick infrared sensor, USB-C charging, and 420ml visual tank.
6. Troubleshooting
If you encounter issues with your dispenser, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Dispenser does not turn on | Low battery; Device is off | Charge the device; Press and hold the power button to turn on |
| No soap dispensed | Soap tank empty; Nozzle clogged; Hand not detected; Incorrect soap consistency | Refill soap; Clean nozzle; Ensure hand is within sensor range; Adjust soap-to-water ratio |
| Soap dispenses slowly or weakly | Low battery; Soap too thick; Air in pump | Recharge; Dilute soap further; Dispense several times to prime pump |
| Excessive noise during operation | Air in pump; Low soap level | Dispense several times; Refill soap |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Xiaomi |
| Model Numbers | P11, P11B, P11S, P11A |
| Capacity | 420ml |
| Power Source | Rechargeable Lithium Battery |
| Voltage | <20V |
| Waterproof Rating | IPX5 |
| Noise Level | Less than 40dB |
| Dispensing Levels | 4 Adjustable Levels |
| Charging Port | USB-C |

Image 5: Illustrates the gear pump mechanism, low noise (<40dB), ultra-low power consumption, and self-cleaning feature.
8. User Tips
- For best foaming results with liquid soap, ensure the water used for dilution is not too hard, as this can affect foam quality.
- If you switch soap types, it's a good idea to rinse the tank and run some clean water through the dispenser to prevent residue buildup.
- Keep the sensor area clear of obstructions to ensure consistent and accurate dispensing.
- Regularly check the battery level to avoid unexpected power loss.
9. Warranty and Support
For warranty information, please refer to the documentation provided with your purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.
A detailed user manual in PDF format may also be available for download. Please refer to the seller's product page or support section for access to the official PDF manual: View PDF Manual