Bosch AL1130CV

Contents

Bosch 10.8V/12V Lithium Battery Charger AL1130CV User Manual

Model: AL1130CV (BOS-1018K)

1. Important Safety Information

⚠️ Please mind potential fire risk and strictly follow the instruction manual for charging and storage.

  • Always keep the charger battery cavity clear. DO NOT put any metal objects into the battery cavity as it may short circuit the charger.
  • Always unplug the charger from the power supply when there is no battery pack in the cavity. Unplug the charger before attempting to clean it.
  • To assist in the cooling of the battery pack after use, avoid placing the charger or battery pack in a warm environment such as in a metal shed, or an un-insulated vehicle or trailer.
  • CAUTION: BATTERY CHARGERS CAN CAUSE ELECTRIC SHOCK, SEVERE INJURY AND DEATH. Please read instructions before using the charger.
  • This charger is designed for indoor use only.
  • Do not probe with conductive metal objects during charging.
  • Do not insert a cracked or damaged battery into the charger.
  • Do not allow any liquid to get inside the charger. Keep it away from water and moisture.
  • To reduce the risk of injury, charge only batteries designed for Bosch 10.8V-12V lithium tools in this charger. Other types of batteries may burst, causing personal injury and damage.
  • Please make sure the power cable is at the correct place, do not let it be trampled or damaged.
  • To reduce the risk of damage, the user should disconnect the charger from the wall socket. Pulling the power cable off the wall socket is not recommended.

2. Product Overview

The Bosch AL1130CV is an intelligent charger designed for 10.8V/12V lithium-ion battery packs. It features multi-indicator lights for charging status and temperature control protection to prevent overheating.

Front view of the Bosch 12V Battery Pack Charger
Front view of the Bosch 12V Battery Pack Charger.
Charger with labels for cooling channel, multi-contact interface, and LED indicator
Detailed view highlighting the charge cooling channel, multi-contact copper plated interface, and LED indicator. Features temperature control protection to prevent charging heat.
Side view of the charger with power cord
Side view of the charger, showing the integrated power cord.
Angled view of the charger with power cord
Angled view of the charger, providing a perspective of its design.

3. Setup and Initial Use

  1. Connect to Power: Connect the power cable to a suitable AC power socket (100V-240V, 50-60Hz).
  2. Insert Battery: Insert the battery pack into the charger, ensuring it is fully seated in the battery cavity.
  3. Charging Indication: The red light on the charger will illuminate, indicating that the charging process has started.
  4. After Charging: Once charging is complete, unplug the charger from the power source.

4. Operating Instructions

4.1. Multifunctional LED Indicator

The charger features a multifunctional LED indicator to communicate the charging status:

Charger with LED indicator states
LED indicator states for the charger.
  1. Charge Waiting: (No light or specific state, implies ready for charging)
  2. Red light keeps flashing: Charging up
  3. Green light keeps flashing: The battery is fully charged
  4. Red light flashing: Equipment overheating
  5. Alternating red and green: Error

4.2. Charging Advice

IMPORTANT:

  • To optimize performance and extend battery life, ensure correct charging procedures are followed.
  • DO NOT charge the battery pack in ambient temperatures below 0°C (32°F) or above 40°C (104°F). This is crucial to prevent serious damage to the battery pack.
  • It is normal for both the charger and battery pack to become warm to the touch during charging.
  • Recharge the battery pack when it no longer provides sufficient power to operate the tool (e.g., when it loses power).
  • DO NOT CONTINUE to use a battery with low voltage or capacity. Immediately charge the battery.

5. Maintenance

  • Cleaning: Always unplug the charger from the power supply before attempting to clean it. Use a dry cloth to wipe the exterior.
  • Storage: Store the charger in a dry environment, away from water and moisture. Ensure the battery cavity is clear of any debris.

6. Troubleshooting

  • Charger not turning on: Ensure the power cable is securely connected to both the charger and a functional power outlet.
  • Battery not charging (red light flashing): Check if the battery is properly seated. If the red light is flashing, it indicates the equipment is overheating. Allow the charger and battery to cool down before attempting to charge again.
  • Alternating red and green lights: This indicates an error. Try re-inserting the battery or using a different compatible battery to diagnose if the issue is with the battery or the charger.
  • Battery not fully charging: Ensure the ambient temperature is within the recommended range (0°C to 40°C / 32°F to 104°F).

7. Specifications

Feature Specification
Model Number AL1130CV (BOS-1018K, BOSCH001)
Use Bosch Battery Charger (for 10.8V/12V Lithium Batteries)
Type Electric
Input Voltage 100V ~ 240V AC, 50-60Hz
Output Voltage 10.8V ~ 12V DC
Output Current Max 3.0A
Rated Power 25W (Output Power ≤37.5W)
Voltage Range Low voltage non-USB (below 75V DC, below 50V AC)
Intelligent Charge Yes
Quick Charge No
Display Screen No
Recommended Charging Temperature Between 0°C (32°F) and 40°C (104°F)
Package Dimensions (L x W x H) 16 cm x 13 cm x 8 cm
Package Weight 0.29 kg

7.1. Compatible Bosch Original Battery Codes

This charger is compatible with the following Bosch original battery codes:

  • 2 607 336 150
  • 2 607 336 607
  • BAT607
  • 2 607 336 318
  • 2 607 336 608
  • BAT607G
  • 2 607 336 600
  • 2 607 336 740
  • BAT614G
  • 2 607 336 091 / 2 607 336 092
  • 2 607 336 169 / 2 607 336 170
  • 2 607 336 235 / 2 607 336 236
  • 2 607 336 559
  • 2 607 336 998
  • BAT609
  • BAT610G
  • BAT618
Back view of the charger with input/output details and certifications
Back view of the charger, showing input: 100-240V~50/60Hz, output: 10.8-12V-1.5A 25W, and CE FC RoHS certifications.

8. User Tips

  • Battery Compatibility: Always verify that your Bosch 10.8V/12V lithium battery pack is listed as compatible with this charger to ensure safe and efficient charging. If your battery model is not explicitly listed, consult the battery manufacturer's specifications.
  • Optimal Charging: For best results and battery longevity, charge batteries when they are cool and within the recommended temperature range.
  • Prevent Overheating: If the red light flashes indicating overheating, disconnect the battery and allow both the charger and battery to cool down in a well-ventilated area before resuming charging.

9. Warranty and Support

This charger comes with a twelve-month warranty from the date of purchase, covering manufacturing defects.

For further detailed instructions and information, a comprehensive user manual is available in PDF format. You can view or download it from the following link: User Manual (PDF).

For technical support or warranty claims, please contact your retailer or the manufacturer directly.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.