1. Introduction
This user manual provides detailed instructions for the FUERS Tuya WIFI GSM Alarm System G30. This system is designed to provide robust home security through a dual network (Wi-Fi and GSM/4G) connection, offering comprehensive protection and remote control capabilities.
The system supports up to 100 wireless sensors, 10 remote tags, and 10 RFID tags, ensuring extensive coverage for your property.

2. Do This First
2.1 Important Notes Before Getting Started
This guide covers both Hub cellular models (2G/4G) and Hub cellular + Wi-Fi models (2G+Wi-Fi/4G+Wi-Fi).
For Hub Cellular + Wi-Fi Model Only:
- You must select a 2.4GHz Wi-Fi network. The hub does not support 5GHz Wi-Fi. Selecting the 5GHz band is a common mistake.
- Your Wi-Fi password must not contain spaces or other special characters.
- Place your hub as close as possible to your router during setup.
- A slow network speed can affect performance. An upload speed of at least 2Mbps or faster is recommended.
- Ensure the AP isolation setting in your router is disabled.
For 4G SIM Card Users:
- If using a 4G SIM card, ensure the 2G network of your wireless service provider is still available in your country. If 2G is unavailable, you should purchase the hub with a 4G cellular communicator.
2.2 What You Need
To set up and use your Alarm System, you will need:
- An iPhone or Android phone with the Smart Security System app installed.
- An unused indoor power outlet.
- A regular SIM card supporting 2G/GSM (for 2G version) or 4G network (for 4G version).
- A Wi-Fi 802.11 b/g/n (2.4GHz) network connection (for Hub cellular + Wi-Fi models only).
3. What's in the Box
Your FUERS G30 Alarm System package includes the following components:
- Smart Hub (Panel): The central unit with alarm, display, and keypad.
- PIR Motion Detector (x1): Senses movement in its vicinity.
- Remote Tag (x2): Wireless key for arming, home-arming, disarming, and triggering emergency alarms.
- RFID Tags (x2, Optional): Key fobs for quick arming and disarming.
- Door/Window Sensor (x1 or x2, Optional): Detects when a door or window is opened.
- External Siren (Optional): Sounds when the alarm is triggered.
- Power Adapter: For powering the Smart Hub.
- Hub Bracket: For mounting the Smart Hub.
- Bottom Cover: For the Smart Hub.
- Screws (x2): For installation.
- PIR Motion Detector Bracket: For mounting the PIR Motion Detector.
- Extra Adhesive Mounting Strips: For door/window installation.

4. Meet Your Alarm System
4.1 How the Alarm System Works
The FUERS G30 operates as a comprehensive security system:
- Arming: You can arm the system using a remote control, RFID tag, the ARM button on the hub, or the mobile app. Once armed, the hub enters "Armed" mode.
- Detection: If a sensor (e.g., Door/Window Sensor) detects an intrusion (e.g., a door being opened), it sends a signal to the main panel.
- Alarm Trigger: The hub recognizes the intrusion. The internal siren sounds at 85dB, and an optional external siren (if installed) sounds at 100dB.
- Notification: The hub sends push notifications and text messages to your phone (if enabled in app settings). It also makes phone calls to preset numbers.

4.2 Getting to Know Your System
The hub cellular+Wi-Fi model is a dual network system that utilizes both Wi-Fi and cellular (GSM/4G). All sensors are wirelessly connected to the hub. In the event of alarm activation, for example, when a sensor is triggered, a push notification will be sent and an alarm call will be made automatically to all registered users. The system can be controlled on-site by the remote tag supplied, or remotely from anywhere with our free dedicated mobile application. The system can connect with up to 100 wireless sensors, 10 remote tags and 10 RFID tags.
Smart Hub Overview
- Display Window: Shows system status, time, alarm information, menus.
- Speaker: For voice prompts and alarms.
- Keypad: ARM, ARM STAY, DISARM, and DIAL buttons for passcode entry, setting, etc.
- RFID Tag Reader Zone: Tap RFID tag here to arm and disarm.
- Tamper Switch: Triggers an alarm if the hub is removed from its installed location.
- Regular SIM Card Slot: Plug in the SIM card here.
- Siren Port: Plug in the siren cable here.
- Backup Battery ON/OFF: Push to ON to activate the built-in backup battery.
- Microphone: For monitoring and two-way talking.
- EOLR Hardwired Zones Connections: For wired sensors.
- Power Port (Type-C): Plug in the power cable here.
Home Screen Status Bar Icons
| Icon | What it means |
|---|---|
| No SIM card inserted or SIM card faulty | |
| Cellular network available (white bars = stronger signal, gray bars = not registered) | |
| Wi-Fi network connected (white = stronger signal, dot = Internet connection) | |
| Text message sending | |
| Calling | |
| Keypad is locked | |
| AC powered, charging (progress bars) | |
| Battery level (red icon = low backup battery) |
5. Installation and Setup
5.1 Smart Hub Placement
Place the Smart Hub in an easily accessible location, close to where you enter and exit your home. This allows for convenient arming and disarming. Ensure it is plugged into an unswitched wall outlet to prevent accidental power loss. The included bracket helps secure the hub.
5.2 Door/Window Sensor Installation
Door/window sensors are set to Delay mode by default and are ideal for protecting entry/exit locations. The magnet should be aligned with the middle of the sensor and placed within 0.6 inches (1.5cm) when the door or window is closed.
5.3 PIR Motion Detector Installation
The motion detector is designed for interior walls and is set to Home Mode by default. Mount the detector bracket with the included screws. The motion detector must be mounted 79 to 87 inches (2 to 2.2m) above the floor. Ensure the detection range is correctly specified. Avoid installing outdoors, in garages, on glass, in places where it could get wet, within 3 feet (1 meter) of heat sources, or behind large appliances/furniture that may obstruct its sensors.
5.4 Installing the SIM Card
- Press and slide the cover in the OPEN direction of the arrow and lift it up.
- Plug your SIM card into the cover.
- Put down the cover, press and slide it in the LOCK direction of the arrow to secure it.
Important: A regular SIM card is required for cellular services. If the gray cellular icon is always shown, the hub has not connected to a network. Ensure the SIM card was inserted when the hub was off and that its security code is permanently deactivated.
5.5 Hardwired Zone Connections
Zone 1, Zone 2, and Zone 3 are EOLR supervised zones supporting both open and closed circuit devices with a 300ms response time. Maximum zone resistance is 11000 ohms, plus EOLR.
- Closed Circuit Devices: Connect in series on the high (+) side of the loop. The EOL resistor must be connected in series with the devices, following the last device.
- Open Circuit Devices: Connect in parallel across the loop. The 10000-ohm EOLR must be connected across the loop at the last device.
Refer to the Hardwired Zones Connections diagram (page 7 of the PDF manual for visual reference).
Important: If the EOLR is not at the end of the loop, the zone will not be properly supervised, and the system may not respond to an open circuit on the zone. Go to Main Menu > Parts > EOL Zone on your hub to set the type and mode of the three wired zones. The default zone numbers are 100, 101, and 102.
5.6 Pairing Devices
The system allows pairing of various wireless accessories. Ensure the hub is in pairing mode before attempting to add new devices.
5.6.1 How to Pair a Remote Tag by Panel
- Go to
Menu > Parts > Remote > Addand enter. - Enter a digit (0-9) to designate a unique number for the remote tag.
- The hub will show "Synchronizing" and enter pairing mode.
- Press any button on the remote tag to send a transmission signal.
- Once added, "Leaning OK" will be shown.
5.6.2 How to Pair a Wireless Sensor by Panel (Door/Window Sensor or PIR Motion Detector)
- Go to
Menu > Parts > Detector > Addand enter. - Scroll and tap to select the desired Zone Name (e.g., Doorbell).
- Scroll and tap to select the desired Zone Mode (Type):
- Normal: Sensors activate in Arm (full arm) or HOME Mode. Recommended for door/window sensors.
- 24 Hours: Sensors activate alarm regardless of arm status.
- Delay: Hub alarms after a delay. Recommended for primary entryways.
- Home: Sensors activate only in Arm (full arm) mode. Not armed in Stay Arm mode. Recommended for PIR Motion Detectors.
- 24 Hours Silent: Same as 24H but without sound.
- Close: Disables the zone.
- Use the keypad to enter a unique Zone Number (0-89).
- The panel will show "Synchronizing".
- Trigger the wireless sensor (e.g., open door/window, activate PIR) to send a transmission signal.
- Once added, "Leaning OK" will be shown.
5.6.3 How to Pair an RFID Tag by Panel
- Go to
Menu > Parts > RFID > Addand enter. - Enter a digit (0-9) to designate a unique number for the RFID tag.
- The hub will show "Synchronizing".
- Tap the RFID Tag on the RFID read zone of your panel.
- Once added, "Leaning OK" will be shown.
5.6.4 How to Pair a Wireless Siren by Panel
- Press and hold the SET button of the siren until you hear two beeps. The siren enters sniffer mode, and the light ring blinks quickly.
- Press the button on the panel within 6 seconds. The panel shows "Learn Signal Sent" and sends a transmission signal to the siren.
- The siren gives four beeps for successful indication.
5.6.5 How to Pair an Alarm Wireless Switch by Panel
- Go to
Menu > Parts > Alarm Socket. - Press and hold the button of the switch until it lights up, then the switch goes into sniffer mode.
- Tap to send ON transmission signal to the switch.
- Tap to send OFF transmission signal to the switch.
- The siren gives three flashes of successful indication.
5.7 App Download and Setup
Scan the QR codes via a smartphone to download and install the application. Your app may look different depending on the hub model.

5.7.1 Connecting to Wi-Fi (Hub Cellular + Wi-Fi Model)
To connect your hub to the Tuya Smart app:
- On the hub, go to
Main Menu > WIFI > Smartlink Configure. - Ensure Bluetooth is turned on on your phone.
- Open the Tuya Smart app. It should automatically discover the "Multifunction alarm" device.
- Select the device and connect to your 2.4GHz Wi-Fi network by entering the password.
- Once successfully added, you can control the alarm system via the app.
6. Operating Your Smart Security System
6.1 Security Levels
The Smart Hub has three different security levels you'll use when you're home or away. You can easily switch between them on the Smart Hub or with an RFID tag, remote tag, or the app.
| Mode | Description | Alarm Sounds | Notifications/Calls |
|---|---|---|---|
| Away Arm | All sensors are monitored. Useful when you're going out and want to be notified if anything happens. | Yes (door/window opens, motion detected) | Yes |
| Home Arm | Normal and Delay (exterior/perimeter) sensors are monitored, but interior sensors are not monitored. Useful when you're at home but want to be alerted if someone tries to break in through a door or window. | Yes (door/window opens) | Yes |
| Disarmed | No sensors are monitored, except 24-HOUR sensors. Allows freedom to go in and out. | No (unless 24-HOUR sensor triggered) | No (unless 24-HOUR sensor triggered) |
6.2 How to Arm or Disarm
You can arm and disarm your home in three ways: entering your passcode on the panel, tapping an RFID Tag, using the remote tag, or via the app. When you hear the panel's chime alert, the screen will also show a countdown.
6.2.1 Using RFID Tag
Tap the RFID tag on the panel's RFID read zone to disarm (if armed) or arm (if disarmed).
6.2.2 Using Remote Tag
- Press the Away Arm button to arm the system.
- Press the Home Arm button to home arm the system.
- Press the Disarm button to disarm the system.
- Press the SOS button to trigger an emergency alarm.
6.2.3 Using the Panel
- Tap ARM to away arm.
- Tap ARM twice to home arm.
- Tap DISARM to disarm.
- Press SOS button to trigger an emergency.
6.2.4 Using the App
- Tap Away Arm to away arm.
- Tap Home Arm to home arm.
- Tap Disarm to disarm.
- Tap SOS to trigger an emergency alarm.
6.3 Setting Phone Numbers for SMS and Phone Calls
Up to 5 stored Phone Numbers will receive text messages (SMS) and phone calls in case of triggered alarms. The hub will call these numbers successively (up to 2 rounds). If a call is answered and a Keypad Command is operated, it stops calling. Otherwise, it continues. Two-way talk is connected automatically when stored phone calls the hub.
To set phone numbers for calls, go to Menu > Call-Phone Number. To set phone numbers for SMS, go to Menu > SMS-Phone Number.
6.4 Exit/Entry Delay
These are countdowns allowing you to leave/enter without triggering the alarm. The default Exit Delay is 40 seconds, and Entry Delay is 30 seconds. You can adjust these from 0 to 255 seconds via Menu > Settings > Delay > Exit Delay or Entry Delay.
6.5 Recording a Voice Message
You can record a brief voice message (up to 20 seconds) that can be played back later. This message will be played to the remote when an alarm call is connected.
- Go to
Menu > Recordand select Record. - When "Recording" is shown, speak into the panel. Recording stops automatically after the time expires.
- The panel plays back the message. Press ✓ to save.
Adjust record duration via Menu > Record > Duration. Playback via Menu > Record > Play. Delete via Menu > Record > Delete.
6.6 Auto Schedule
Set an arm and disarm schedule for automatic daily operation. Go to Menu > Timer > Arm Schedule/Disarm Schedule. Enter the daily arm/disarm time (24-hr format) and toggle 'on' to enable the schedule.
6.7 Make a Call on Panel
On the home screen, tap any digit to enter the dialing screen, enter the number, then tap ✓ to dial. The call will be cancelled if the cellular network is not registered, the system is armed, or in voice alarming.
6.8 Smart Hub Features
- Battery Backup: The hub includes a backup battery that lasts over 3 hours, ensuring detection and alarm even during power outages. The battery icon shows level/charging status. Low battery notifications are sent to registered numbers. Full charge takes 8-12 hours.
- Loss/Restoration of AC Power: You will receive an alert notification if AC power is lost or restored.
- Tamper Detection: If the Smart Hub is tampered with or removed from its back plate, an alert notification will be sent.
7. Maintenance
7.1 Battery Replacement
- Door/Window Sensor: If the LED indicator blinks in case of low battery, replace the CR2032 3V lithium battery.
- PIR Motion Detector: If the LED indicator blinks in case of low battery, replace the three AA 1.5V batteries.
- Remote: Replace the CR2025 Lithium Battery (x1) when needed.
7.2 Cleaning
Wipe the Smart Hub and sensors with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the devices.
8. Troubleshooting
8.1 Wi-Fi Connection Issues
- Not connecting: Ensure you are connecting to a 2.4GHz Wi-Fi network, as 5GHz is not supported.
- Password issues: Verify your Wi-Fi password does not contain spaces or special characters.
- Signal strength: Place the hub closer to your router.
- AP Isolation: Ensure AP isolation is disabled in your router settings.
8.2 SIM Card / Cellular Network Issues
- No network connection (gray cellular icon): Ensure the SIM card was inserted while the hub was off. Verify the SIM card's security code is permanently deactivated. Check if your service provider's 2G network is still available if using a 4G SIM card.
- Alarm calls not working: Ensure the cellular network is registered, the system is not armed (for outgoing calls), and there is no voice alarming in progress.
8.3 App Notifications
- Not receiving notifications: Ensure the app has permission to receive notifications on your phone. Forbidden permissions may cause app failure.
8.4 Sensor Pairing Issues
- Sensors not pairing: Double-check the pairing steps for each device type (remote tag, wireless sensor, RFID tag, siren, switch). Ensure the hub is in the correct pairing mode and the device is triggered within the specified time.
8.5 False Alarms
- PIR Motion Detector: Review placement guidelines to avoid heat sources, direct sunlight, or areas with turbulent air. Adjust sensitivity settings if available.
- Exit/Entry Delay: Ensure delay times are sufficient for your needs to prevent accidental triggers.
9. Specifications
| Component | Specification |
|---|---|
| Hub |
|
| Remote |
|
| Door/Window Sensor |
|
| PIR Motion Sensor |
|
| RFID Tag |
|
| Wireless Siren |
|
| General |
|
10. User Tips
- Many users find the system cool and easy to set up, so don't be intimidated by the initial setup process.
- While the alarm panel itself doesn't directly register cameras, the Tuya platform often supports integrating various smart home devices, including cameras, for a unified smart home experience. Check the Tuya Smart Life app for compatible camera options.
- Remember to ensure your Wi-Fi is 2.4GHz, as 5GHz is not supported, which is a common point of confusion for new users.
11. Warranty and Support
For further detailed instructions, diagrams, or specific troubleshooting not covered in this manual, please refer to the official user manual PDF available at User manual (PDF).
If you encounter any issues or require technical assistance, please contact the seller or manufacturer's customer support. Keep your purchase records handy for any warranty claims.