Fuers G70

Contents

FUERS G70 Smart Security System User Manual

7 Inch TFT Screen 4G LTE WiFi Tuya Smart Home Security Alarm System

1. About Your Alarm System

This smart alarm system provides comprehensive security for your home. All sensors are wirelessly connected to the main panel. The panel continuously monitors these sensors, and if an armed sensor detects an issue, it triggers an alarm, sends text notifications, and initiates alarm calls to registered users.

FUERS G70 Smart Security System components including main panel, cameras, sensors, and remote controls.
Figure 1: Overview of the FUERS G70 Smart Security System components.

2. In the Box

Verify that all the following items are included in your package:

  • Alarm Panel x1
  • Door/Window Sensor x1
  • Motion Sensor x1
  • USB Cable x1
  • User Guide x1
  • Screws and anchors x4

Optional Accessories (May be included depending on kit)

  • Power Adapter
  • Remote Tag
  • Siren
  • Wireless Siren
  • Wireless Keypad

3. Product Overview

3.1 Alarm Panel

The alarm panel features a 7-inch TFT touchscreen for easy interaction and monitoring.

Close-up of the 7-inch panel's user-friendly UI, displaying time, date, weather, and system status.
Figure 2: The 7-inch large screen offers a user-friendly interface.
  1. Touchscreen: Displays system status, alarm information, logs, settings, SOS, Arm, Disarm, and Home Arm icons.
  2. Light Ring: Indicates ARM / DISARM / HOME ARM / ALARM status.
  3. Tamper Switch: Located underneath the bracket, it triggers an alarm if the panel is removed from its installed location.
  4. Speaker: Provides voice prompts and alarm sounds.
  5. Power Port (Type-C): Connect the power cable here.
  6. Backup Battery ON/OFF: Switch to ON to activate the built-in 3.7V, 5000mAh lithium backup battery.
  7. 4FF (Nano) SIM Card Slot: Insert your SIM card here for cellular functions.
  8. Siren Port: Plug in the siren cable here.
  9. Wall Bracket: For installation.
Graphic illustrating the 5000mAh ultra-long battery life of the alarm panel.
Figure 3: The panel is equipped with a 5000mAh battery for ultra-long battery life.

3.2 Light Ring Indicators

What you seeWhat it means
Solid blueArmed
Solid greenDisarmed
Solid purpleHome armed
Blinking redAlarm in progress
Blinking blueExit delay
Blinking yellowEntry delay
Blinking whitePairing/Sniffer mode

3.3 Top Status Bar Icons

The icons in the status bar at the top of the screen provide information about the panel's status.

IconWhat it means
No SIM card inserted or SIM card faulty
Cellular network barsShows cellular network availability. Black bars indicate stronger signal. Gray bars mean not registered with cellular network.
Wi-Fi iconIndicates Wi-Fi connection. Black means strong signal, gray means no internet connection.
SMS iconText message sending
Call iconCalling
Power iconPanel powered by AC power
Charging iconProgress bars show charging status. Fully charged when full.
Battery iconShows battery level when on backup power. Red indicates low battery.
Battery failure iconBattery failure or not installed.

3.4 Door/Window Sensor

  1. Indicator: Lights up when opened/closed, blinks for low battery.
  2. Open-close Magnet: Detects opening/closing of doors/windows.
  3. Setting/Panic Button: Sends signal for pairing or alarm.
  4. Tamper Switch: Triggers alarm if sensor is tampered with.
  5. Battery Receptacle: Holds one CR2032 3V lithium battery.
  6. Power On/Off: Slide to 'ON' to power up.

3.5 PIR Motion Sensor

  1. Detection Window: Area where motion is detected.
  2. Indicator: Lights up on motion detection, blinks for low battery.
  3. Power On/Off: Slide to 'ON' to power up.
  4. Setting Switches: For pulse counter settings.
  5. Battery Receptacle: Holds three AA 1.5V batteries.

3.6 Remote Tag

  1. Arm Button: Arms the system when no one is home.
  2. Disarm Button: Disarms the system.
  3. Home Arm Button: Arms the system for home mode.
  4. SOS Button: Triggers an emergency alarm.

4. Specifications

4.1 Alarm Panel

  • Power Supply: 110/220VAC to Type-C 5V, 2000mA
  • Backup Battery: 3.7V, 5000mAh Lithium Battery
  • Avg. Consumption: <300mA@screen off, <650mA@screen on
  • Siren Output: <500mA@high volume mode, <50mA@low volume mode
  • Radio Frequency: 433Mhz
  • Cellular: Cat-1
    • LTE-FDD B1/B2/B3/B4/B5/B7/B8/B28/B66 (for SA version)
    • LTE-FDD B1/B3/B5/B7/B8/B20 (for E version)
    • LTE-FDD B1/B3/B5/B8 and LTE-TDD B34/38/39/40/41 (for C version)
  • SIM Card: 4FF/Nano
  • Wi-Fi: IEEE802.11b/g/n
  • Connectivity: Wireless siren, up to 10 remote tags, up to 100 sensors
  • Operation Temperature: -10~55℃

4.2 Door/Window Sensor

  • Power Supply: DC 3V (CR2032 Lithium Battery x1)
  • Consumption: <8uA@Standby, <15mA@Alarm
  • Transmitting Distance: <150m (Open Area/No Interference)
  • Radio Frequency: 433Mhz/FSK
  • Operation Temperature: -10~55℃

4.3 PIR Motion Sensor

  • Power Supply: 1.5V AA Battery x3
  • Consumption: <15uA@Standby, <25mA@Alarm
  • Motion Distance: <12 meters
  • Motion Range: 110°
  • Transmitting Distance: <150m (Open Area and No Interference)
  • Radio Frequency: 433Mhz/FSK
  • Operation Temperature: -10~55℃

4.4 Remote Tag

  • Power Supply: DC 3V (CR2025 Lithium Battery x1)
  • Consumption: <5uA@Standby, <15mA@Alarm
  • Transmitting Distance: <150m (Open Area and No Interference)
  • Radio Frequency: 433Mhz/FSK
  • Operation Temperature: -10~55℃

5. Setup and Installation

5.1 Install the SIM Card

A micro SIM card is required for cellular services (text messages, alarm calls). Install the SIM card before proceeding with setup.

  1. Slide the cover in the direction of the arrow and lift it up.
  2. Install your SIM card into the slot.
  3. Put down and slide back the cover in the direction of the arrow to lock it.

Once the cellular icon in the top status bar turns black, your panel is connected to a cellular network.

5.2 Download and Install the App

Scan the QR code below or search for "Smart Life" in Google Play Store (Android) or Apple App Store (iOS). The app will guide you through registration and connecting the panel to the internet.

Woman interacting with a voice assistant (Alexa) to arm the system, demonstrating smart home integration.
Figure 4: The system supports voice control via Amazon Alexa and Google Assistant.

5.3 Add Your Panel to the App (Wi-Fi Setup)

  1. Ensure your phone's Bluetooth is on and connected to your home's 2.4GHz Wi-Fi network (5GHz networks are not supported). If you have a dual-band router, ensure the 2.4GHz signal is set up separately.
  2. On your panel, navigate to Home icon > Settings icon > Wi-Fi > Ready > Start. The screen will display "CONNECTING...".
  3. In the Smart Life App, tap the "+" icon in the top right corner to scan for devices automatically. Select your panel, enter your Wi-Fi network password, and follow the in-app instructions to complete the connection.

5.4 Where to Place Your Devices

Smart Panel Placement

  • Place the panel in a location that is easily accessible when entering or exiting your home.
  • Choose a spot with strong Wi-Fi and cellular signal for reliable notifications and text messages.
  • Use an unswitched wall outlet to prevent accidental power loss.
  • Avoid mounting the panel on metal surfaces, as this can block RF signals.

Panel Installation Options

  • Wall Installation: Fix the included bracket to the surface with screws, then insert the panel into the bracket.
  • Desktop Placement: The panel comes with a kickstand for desktop use.

Door/Window Sensor Placement

Attach the bracket and magnet to a flat surface using mounting strips. The magnet should be aligned with the middle of the sensor and placed within 0.6 inches (1.5cm) when the door or window is closed.

PIR Motion Sensor Placement

  • Mounting Height: Mount 79 to 87 inches (2 to 2.2m) above the floor.
  • Fix the bracket with screws, then place the motion detector in the bracket.
  • Special Considerations:
    • Do not install outdoors, in a garage, or on glass.
    • Cannot detect motion through glass.
    • Avoid places where it might get wet (e.g., near swing-out windows).
    • Keep at least 3 feet (1 meter) away from heat sources (electric heaters, vents, fireplaces) or sources of turbulent air.
    • Do not install behind large appliances or furniture that could obstruct its motion sensors.

5.5 Pairing Sensors and Remote Tags

Sensors and remote tags can be paired via the panel or the app.

Pairing via Panel

  1. Go to Home icon > Accessories > + > Start. The panel will enter pairing sniffer mode and show a countdown.
  2. Trigger the device to be added:
    • Door Sensor: Align the magnet closely, then separate them until the light comes on.
    • PIR Motion Sensor: Trigger motion in front of the sensor.
    • Remote Tag: Press any button on the remote.
    • Keypad: Enter USER PASSCODE + DISARM BUTTON.
  3. Once captured, a window will pop up. Edit the device type/mode, give it a nickname, and tap Enter to add.

About Sensor Mode Settings

  • Normal: Activated in Arm (full arm) or HOME Mode. Recommended for window sensors.
  • 24 Hours: Activates alarm regardless of arming status.
  • Delay: Sounds alarm after a delay. Recommended for primary entryways.
  • Home: Only activated in Arm (full arm). Not armed in Stay Arm Mode. Recommended for PIR Motion Detectors.
  • 24 Hours Silent: Same as 24 Hours but without sound.
  • Home with delay: Same as Home but with Entry Delay.
  • To disable a sensor, select Off.

Pairing via App

  1. In the Smart Life App, select your panel from the "All Devices" list. Tap Accessories > +, and your panel's light ring will blink white.
  2. Follow the same steps as "Pairing via Panel" to trigger your device.
  3. Once captured, the device will be automatically added to the panel and appear in the Accessories list in the app.

Tips: Up to 100 sensors and 10 remote tags can be added.

5.6 How to Connect a Wireless Siren

  1. Press and hold the SET button on the siren until you hear one beep. The siren will enter sniffer mode, and its light ring will turn on.
  2. Within 20 seconds, go to Home icon > Accessories > Lo > Send on the panel. The panel will display "Pairing Signal Sent" and transmit a signal to the siren.
  3. The siren will emit a long beep, indicating successful connection.

Tips: The siren sounds at 100dB when an alarm is triggered.

Video 1: Product demonstration showing Wi-Fi setup, sensor pairing, and alarm testing.

6. Operating the System

6.1 Arming and Disarming

Away Mode

All sensors in your home are monitored. Ideal when you are away and want full notification of any events.

How to Away-Arm:

  • Press the Arm button on a remote tag.
  • Tap the Arm icon on the panel's home screen.
  • Tap the AWAY ARM icon through the Smart Life App.

Home Mode

All NORMAL sensors are monitored, but HOME sensors are not monitored. Useful when you are at home but want to be alerted if someone tries to break in through a door or window.

How to Home-Arm:

  • Press the Home Arm button on a remote tag.
  • Tap the Home Arm icon on the panel's home screen.
  • Tap the HOME ARM icon through the Smart Life App.

Disarmed Mode

No sensors are monitored, except for 24 HOUR sensors. This mode allows free movement within your home without triggering alarms.

How to Disarm:

  • Press the Disarm button on a remote tag.
  • Tap the Disarm icon on the panel's home screen.
  • Tap the DISARM icon through the Smart Life App.

6.2 Triggering an Alarm

  • Press and hold the SOS icon on the panel for 3 seconds.
  • Tap the SOS icon through the Smart Life App.

6.3 Keypad Commands (from phone call)

Which button you press on phoneWhat happens
1Arm
2Disarm or silence when the alarming is sounding
3 or 4Two-way talk

7. Settings

7.1 Set Contacts for SMS and Phone Calls

Up to 5 phone numbers can be stored to receive text messages (SMS) and phone calls during triggered alarms.

  • Go to Home icon > Settings > Contacts to set.
  • You can also set phone numbers in the Setting page of your panel through the Smart Life App.

Tips: The panel will call stored numbers successively (up to 2 rounds). If a call is answered and a Keypad Command is used, subsequent calls will stop. If a call-in from a stored number is received, two-way talk is automatically connected.

7.2 Auto-Lock

For enhanced security, you can set a passcode to unlock your panel. If Auto-Lock is enabled and the panel is inactive for a set time, the screen will turn off and lock.

  • To adjust timing: Home icon > Settings > Security > AUTO-LOCK.
  • To change passcode: Home icon > Settings > Security > CHANGE PASSCODE. Default passcode is 1234.

7.3 Exit / Entry Delay

These delays provide time to arm/disarm the system without triggering an alarm.

  • Exit Delay: Allows you to leave after arming. Default is 40 seconds (adjustable from 0-999 seconds).
  • Entry Delay: Allows you to enter and disarm. Default is 30 seconds (adjustable from 0-999 seconds).
  • To adjust delay values: Home icon > Settings > Security > Exit Delay / Entry Delay.
  • You can also adjust these settings through the Smart Life App.
  • To disable the countdown tick sound during delay, turn "Entry/Exit Tick" off.

7.4 Changing Alarm Sound Volume

  • Go to Home icon > Settings > Security > Sound Level.
  • In the Smart Life App, go to Settings > Alarm sound volume to change the siren volume (High / Low / Mute). In Mute mode, the siren will not sound.
Image showing adjustable display brightness and sound settings on the panel.
Figure 5: Adjusting sound and display settings on the panel.

8. Maintenance

8.1 Battery Replacement

  • Door/Window Sensor: Replace with one CR2032 3V lithium battery when the indicator blinks for low battery.
  • PIR Motion Sensor: Replace with three AA 1.5V batteries when the indicator blinks for low battery.
  • Remote Tag: Replace with one CR2025 Lithium Battery x1.
  • Alarm Panel: The internal 3.7V, 5000mAh Lithium Battery is a backup. Ensure the panel is connected to AC power for primary operation.

9. Troubleshooting

  • SIM Card Not Recognized: Ensure the SIM card is correctly inserted and fully seated. If issues persist, try reinserting or testing with another SIM card. The SIM card slot can be fiddly.
  • Siren Not Working: Verify the siren is properly connected to the siren port and has been successfully paired. Check the siren's power supply.
  • Wi-Fi Connection Issues: Ensure your phone is connected to a 2.4GHz Wi-Fi network (not 5GHz) during setup. Check Wi-Fi signal strength.
  • Sensor Not Recognized During Pairing: Make sure the sensor is activated correctly (e.g., separating magnet for door sensor, triggering motion for PIR) within the panel's 20-second pairing window.
  • Can Tuya be used without Wi-Fi, only with SIM and LTE? Yes, the system supports 4G LTE cellular connectivity, allowing it to send alarms and notifications even without a Wi-Fi connection.
  • Is the screen in Spanish? The panel supports multiple languages including Chinese, English, German, French, Italian, and Spanish. You can change the language in the settings.
  • Is it possible to add 2 outdoor sirens to the kit? The system supports connecting to a wireless siren. Check the product specifications or contact support for compatibility with specific outdoor siren models and the maximum number of sirens supported.

10. User Tips

  • When setting up Wi-Fi, ensure your phone's Bluetooth is enabled for automatic device discovery.
  • If experiencing issues with SIM card recognition, carefully re-insert the SIM card, ensuring it's firmly in place.
  • For optimal performance, place the main panel in a central location with good Wi-Fi and cellular signal strength.
  • Regularly check the battery status of your sensors and remote tags to ensure continuous protection.

11. Additional Resources

For a more detailed guide and visual instructions, you may refer to the official PDF user manual: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.