1. Introduction
Thank you for choosing the Tuya Zigbee Temperature & Humidity Sensor. This device is designed to monitor environmental conditions in real-time, providing accurate temperature and humidity data to your smart home system. It integrates seamlessly with Zigbee gateways and is compatible with popular smart home platforms like Tuya Smart, Smart Life, Google Assistant, and Amazon Alexa.

2. Safety Precautions
- Do not install the product outdoors.
- Avoid installing on an unstable base or anywhere unprotected from rain.
- Ensure the installation surface is smooth, flat, dry, and clean.
- Do not attempt to disassemble or modify the device, as this may void the warranty and cause damage.
3. Product Overview
The sensor features a minimalist design with a status indicator and a reset button for easy operation.

Components:
- Main Body: The primary unit containing the sensor and electronics.
- Status Indicator: An LED light that shows the device's current status (e.g., pairing mode, connected).
- Reset Button: Used for pairing and resetting the device.
4. Specifications
| Attribute | Value |
|---|---|
| Product Name | Zigbee Temperature & Humidity Sensor |
| Wireless Protocol | Zigbee 3.0 |
| Working Voltage | DC3V |
| Battery Type | 2*AAA (not included) |
| Standby Current | ≤30uA |
| Low Voltage & Undervoltage | ≤2.7V |
| Operating Temperature | -10℃ ~ +50℃ |
| Operating Humidity | 10% - 90% RH |
| Wattage | 0.3W |
| Certification | CE |
| Dimensions (approx.) | 70mm (L) x 25mm (W) x 20mm (H) |

5. Installation
The sensor can be installed on a wall using double-sided tape or placed in the desired measurement area.
- Choose a Location: Select a smooth, flat, dry, and clean surface indoors where you want to monitor temperature and humidity. Avoid direct sunlight or drafts that could affect readings.
- Affix the Sensor: Use the provided double-sided tape to affix the product to the chosen surface. Ensure it is securely attached.


6. Network Configuration
This Zigbee sensor requires a Zigbee gateway (hub) to function properly and connect to your smart home app (Tuya Smart/Smart Life).
- Power on the Product:
- Open the battery cover of the sensor.
- Insert two AAA batteries (not included), ensuring correct positive (+) and negative (-) polarity.
- Close the battery cover.
- Enter Network Configuration Mode:
- Quick Connection Mode: Press and hold the RESET button for 5 seconds, then release. The LED indicator will flash slowly. Follow the prompts in your Zigbee gateway app to add the device.
- Compatibility Mode: If quick connection fails, press and hold the RESET button for 10 seconds, then release. The LED indicator will flash quickly. Follow the prompts in your Zigbee gateway app to add the device.
- Add to App: Once the sensor is in pairing mode, open your Tuya Smart or Smart Life app, navigate to your Zigbee gateway, and follow the in-app instructions to discover and add the new device.
7. Operation
After successful network configuration, the sensor will automatically report temperature and humidity data to your smart home app.
- Real-time Monitoring: View current temperature and humidity readings directly in the Tuya Smart or Smart Life app.
- Data History: The app provides historical data and graphs, allowing you to track environmental changes over time.
- Automation: Set up smart scenes and automations based on temperature and humidity thresholds. For example, receive alerts for high humidity or trigger a smart plug to turn on a dehumidifier.
- Voice Control: Integrate with Amazon Alexa or Google Assistant for voice commands to check current readings (e.g., "Alexa, what's the temperature in the living room?").



8. Maintenance
The primary maintenance for this device involves battery replacement.
- Battery Replacement: When the battery level is low (indicated in the app or by device behavior), open the battery cover and replace the two AAA batteries, observing correct polarity.
- Cleaning: Wipe the sensor with a dry, soft cloth. Do not use liquid cleaners or immerse the device in water.
9. Troubleshooting
- Device not connecting to gateway: Ensure the sensor is within range of your Zigbee gateway. Try re-entering pairing mode (Quick Connection or Compatibility Mode) and adding it again through your app. Confirm your Zigbee gateway is powered on and functioning correctly.
- Inaccurate readings: Ensure the sensor is not placed in direct sunlight, near heat sources, or in areas with significant drafts, as these can affect accuracy.
- No data updates: Check the battery level in the app. Replace batteries if low. Ensure the Zigbee network is stable.
- Cannot be placed outdoors: This device is designed for indoor use only. Exposure to outdoor elements like rain or extreme temperatures can damage the sensor and void its functionality.
10. User Tips
- Zigbee Gateway is Essential: Remember that this is a Zigbee device and requires a Zigbee gateway (hub) to connect to your Wi-Fi network and smart home app. It cannot connect directly to Wi-Fi.
- Home Assistant Integration: Many users report seamless integration with Home Assistant, often via Zigbee2MQTT or a Zigbee dongle. This allows for advanced automations and data visualization.
- Battery Life: Users have noted good battery life compared to Wi-Fi sensors. However, actual battery duration may vary based on reporting frequency and environmental conditions.
- Automation Potential: Leverage the sensor's data for powerful automations, such as triggering a smart plug to control a fan or dehumidifier when certain temperature or humidity thresholds are met.
- Accuracy: While generally accurate, some users observe slight deviations. For critical applications, consider cross-referencing with another calibrated thermometer.
- Reporting Frequency: The sensor reports data reliably and regularly, though there might be a small delay in updates depending on your Zigbee network and gateway settings.
11. Warranty and Support
For detailed warranty information and technical support, please refer to the official product page or contact the seller directly. A comprehensive user manual in PDF format is also available for download: