FGHGF B29C-2X

Contents

User Manual: FGHGF B29C-2X Rear View Camera and 4.3-inch TFT LCD Display

Model: B29C-2X

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your FGHGF B29C-2X Rear View Camera and 4.3-inch TFT LCD Display system. This product is designed to enhance safety and convenience by providing a clear view of the area behind your vehicle, especially during reversing maneuvers. It features a waterproof design, night vision capabilities, and a wide viewing angle suitable for various vehicles.

2. Safety & Warnings

Warning!

  • This product is only for adult use.
  • Please keep out of reach of children and pets to avoid accidental injury or ingestion.
  • Check if the installation is correct before regular use.
  • If there is abnormal noise or equipment error after installation, please stop the device immediately and consult a professional.
  • Follow all instructions for proper use; misuse may cause harm.
  • Please store the product in a dry and shady place, away from high temperatures, humidity, and direct sunlight.

⚠️ Disclaimer: Camera products can only be used for purposes permissible under applicable laws and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.

This product complies with CE standards.

3. Package Contents

Please check the package to ensure all items are present:

  • 2 x 4.3-inch TFT LCD Monitor
  • 2 x 8-light Model Rear View Camera
  • 2 x Video Cable (RCA)
  • 4 x Power Cables
  • 4 x Screws
Complete kit including two monitors, two cameras, and various cables.
Figure 1: Complete Package Contents

4. Setup & Installation

The monitor can be installed via a mount holder or universal bracket (included). The camera is typically mounted at the rear of the vehicle.

4.1. Wiring Diagram Overview

The system uses RCA connectors for video signals and DC power jacks for power. Ensure all connections are secure.

Rear view of the monitor showing power input and video input ports.
Figure 2: Monitor Rear Connections (Power and Video Input)
Front view of the 4.3-inch monitor with RCA cables connected.
Figure 3: Monitor with RCA Video and Power Cables

4.2. Connection Steps

  1. Mount the Camera: Securely attach the rear view camera to the desired location at the back of your vehicle.
  2. Connect Camera Power: Connect the camera's power cable (red and black wires) to your vehicle's 12V power supply. For automatic activation when reversing, connect the red wire to the positive lead of your vehicle's reverse light and the black wire to ground.
  3. Connect Camera Video: Connect the yellow RCA video cable from the camera to one of the video input ports (e.g., AV1 or AV2) on the monitor.
  4. Mount the Monitor: Position the 4.3-inch TFT LCD display in a convenient location in your vehicle, ensuring it does not obstruct your view while driving.
  5. Connect Monitor Power: Connect the monitor's power cable to a 12V power source in your vehicle. This can be a switched 12V source (e.g., accessory power) or directly to the reverse light circuit if you only want the monitor to turn on when reversing.
  6. Test the System: Turn on your vehicle and engage reverse gear (if connected to reverse lights). The monitor should automatically display the camera feed. Adjust the camera angle if necessary.

5. Operating Instructions

The FGHGF B29C-2X system is designed for straightforward operation:

  • Automatic Activation: If wired correctly to the reverse lights, the monitor will automatically power on and display the camera feed when the vehicle is put into reverse gear.
  • Manual Activation: If the monitor is connected to a constant 12V power source, it can be manually turned on/off or switched between video inputs (if applicable) using its controls.
  • Night Vision: The camera includes 8 LED lights and supports night vision up to 5 meters, providing clear images even in low-light conditions.
  • Parking Guidelines: The monitor displays parking guidelines to assist with reversing, as shown in Figure 4.
Monitor displaying a rear view with parking guidelines, resolution 800x480.
Figure 4: Monitor Displaying Rear View with Parking Guidelines

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the monitor screen and camera lens. Avoid abrasive cleaners or solvents.
  • Inspection: Periodically check all cables and connections for wear, damage, or looseness. Ensure the camera and monitor are securely mounted.
  • Storage: If the product is not in use for an extended period, store it in a dry and shady place, away from extreme temperatures.
  • Damage Prevention: Ensure the product is free from any physical damage. Do not attempt to open or repair the units yourself.

7. Troubleshooting

  • No Image on Monitor:
    • Check all power connections to both the camera and the monitor. Ensure they are receiving 12V DC power.
    • Verify the video cable (RCA) is securely connected between the camera and the correct video input on the monitor.
    • If connected to reverse lights, ensure the vehicle is in reverse gear.
  • Flickering or Distorted Image:
    • Check for loose video cable connections.
    • Ensure the power supply is stable and free from interference.
    • Verify the TV system setting (NTSC) is compatible.
  • Abnormal Noise or Equipment Error:
    • Immediately stop using the device.
    • Disconnect power and recheck all connections.
    • If the issue persists, contact customer support.

8. Specifications

Feature Specification
Product Name 2X Rear View Camera Wide Degree 4.3inch TFT LCD Display or Monitor Waterproof Night Vision Reversing Backup
Image Sensor 1/3 CCD
TV System NTSC
Horizontal Resolution 480 TV lines
Effective Pixels 628 x 582 pixels / 510 x 492 pixels
Minimum Illumination 3Lux/F1.2 (0 Lux with IR on)
Night Vision Range 5 meters
Lens 2.8 mm / 120-degree
Diagonal Viewing Angle 135-degree
Synchronization Internal synchronization
Signal to Noise Ratio Greater than 48db
Video Output RCA interface, 1.0Vp-p, 75Ohm
White Balance Auto
Power DC 12V
Material ABS + electronics
Color Black
Monitor Dimensions 122mm x 77mm
Diagram showing the dimensions of the 4.3-inch monitor: 122mm width and 77mm height.
Figure 5: Monitor Dimensions

9. User Tips

  • Optimal Camera Placement: Experiment with different camera mounting positions to find the best viewing angle for your vehicle, ensuring a clear view of potential obstacles.
  • Cable Management: Route all cables carefully to avoid pinching, chafing, or interference with vehicle components. Secure them with cable ties or clips.
  • Power Source Consideration: If you experience any electrical interference (e.g., lines on the screen), consider adding a power filter to the camera or monitor's power line.
  • Regular Checks: Periodically check the camera lens for dirt or debris, especially after driving in adverse weather conditions, to maintain clear visibility.

10. Manufacturer Information

Manufacturer:

Taiyuan aopusite electronic commerce co., ltd
Room 1302, 13th floor, Unit 3, Building 6, Hengda Yayuan Community,
Wanbailin District, Taiyuan City, Shanxi Province Code: 030000
Email: yishun225@outlook.com
Phone: 8615360170591

EU Authorized Representative:

Outong GmbH
Brehmstr, 56, 40239 Duesseldorf
Email: info@outong.de
Phone: 49 21131054698

For a comprehensive user manual in PDF format, please refer to the official document: User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.