1. Introduction
The Tuya Wifi Smart Dimmer Timing Switch (Model A36T) is designed to provide intelligent control over LED cabinet light drivers. This device allows for convenient brightness adjustment and timing functions, seamlessly integrating with popular smart home platforms such as Google Home, Amazon Alexa, and Yandex Alice for voice control.
Package Contents
- 1 x Smart Dimmer
Note: Only the above package content is included. Other products shown in illustrations are for demonstration purposes only and are not part of the package.
2. Safety & Warnings
Warning!
- This product is intended for adult use only.
- Keep out of reach of children and pets to prevent accidental injury or ingestion.
- Always verify that the installation is correct before operation.
- If you observe abnormal noise or equipment errors after installation, immediately discontinue use of the device.
- Adhere strictly to all instructions for proper use; misuse may lead to harm.
- Store the product in a dry and shaded environment, away from high temperatures, excessive humidity, and direct sunlight.
3. Specifications
| Feature | Detail |
|---|---|
| Model | A36T |
| Material | Plastic |
| Smart Dimmer Input | DC12/24V |
| Smart Dimmer Output | PWM |
| LED Cabinet Light Driver Input | 100-240V 50/60Hz |
| LED Cabinet Light Driver Output | 12V 3A Max |
| Operating Temperature (LED Driver) | ta:40°C, tc:85°C |
| EU LVD Voltage Compliance | Below 50Vac or 75Vdc |
| Certification | CE Mark (Product carries a CE mark, indicating conformity with European safety standards) |
| Origin | Mainland China |
4. Setup
4.1. Physical Installation
The smart dimmer is designed for easy integration with your existing LED cabinet light driver system.
- Ensure all power to the LED cabinet light driver is disconnected before beginning installation.
- Locate the output interface of your LED cabinet light driver.
- Plug the cable from the Smart Dimmer into the LED cabinet light driver interface.
- Crucially, ensure that the positive (+) and negative (-) poles of the dimmer correspond correctly to the positive and negative poles of the cabinet lights driver to prevent damage.

4.2. App Setup & Pairing
To unlock the full smart features of your dimmer, you need to connect it to the Tuya Smart or Smart Life application.
- Download the App: Download and install the "Tuya Smart" or "Smart Life" app from your smartphone's app store (available on iOS and Android).
- Register/Log In: Open the app and register for a new account or log in with an existing one.
- Add Device: Follow the in-app instructions to add a new device. You will typically select "Lighting" or "Dimmer" from the device categories.
- Connect to Wi-Fi: The app will prompt you to select your Wi-Fi network (2.4GHz only) and enter the password.
- Pairing Process: The device will automatically connect. Follow any on-screen prompts until the pairing process is complete.

5. Operating Instructions
5.1. Brightness Adjustment
Control the intensity of your LED cabinet lights directly from the app.
- Open the Tuya Smart or Smart Life app.
- Select your Smart Dimmer device.
- Use the slider or numerical input within the app interface to adjust the brightness from 1% to 100%.
- The adjustment response is fast, with virtually no delay.

5.2. Voice Control
Integrate your smart dimmer with voice assistants for hands-free operation.
- Ensure your smart dimmer is linked to your Google Home, Amazon Alexa, or Yandex Alice account through the respective smart home app.
- Use voice commands such as:
- "Alexa, turn on the light."
- "Turn up the light a little brighter."
- "Alexa, Brightness set to 80%."
- "Okay, turn off the cabinet lights."

5.3. Timing Switch
The smart dimmer supports timing functions, allowing you to schedule when your lights turn on or off, or adjust brightness at specific times. This feature is configured within the Tuya Smart or Smart Life application.
6. Maintenance
- Before First Use: Always ensure the product is free from any visible damage before initial installation and use.
- Cleaning: Use a soft, dry cloth to clean the device. Do not use abrasive cleaners or solvents.
- Storage: When not in use for extended periods, store the product in a dry and shaded place, away from extreme temperatures and humidity. Keep it out of reach of children.
- General Note: Due to light reflection and different display settings, the actual color of the item may vary slightly from images. A measurement error of +/- 1-3cm is allowed.
7. Troubleshooting
- Device Not Responding: Check all physical connections to ensure they are secure and correctly polarized. Verify that the LED cabinet light driver is receiving power.
- Abnormal Noise or Equipment Error: If you experience any unusual sounds or malfunctions after installation, immediately disconnect power to the device and inspect connections. If the issue persists, contact support.
- App Connectivity Issues: Ensure your smartphone is connected to a 2.4GHz Wi-Fi network during setup. Check that your Wi-Fi signal is strong where the dimmer is installed. Restart the app and try the pairing process again.
- Voice Control Not Working: Confirm that the dimmer is successfully linked to your smart assistant (Google Home, Alexa, Alice) account. Check your internet connection and ensure your voice commands are clear and match the device's name in the app.
8. User Tips
- For optimal performance and reliable connectivity, ensure your Wi-Fi router is centrally located and provides a stable signal to the smart dimmer.
- Regularly check the Tuya Smart or Smart Life app for firmware updates for your device, as these often include performance improvements and new features.
- When setting up voice commands, use simple and distinct names for your lights to avoid confusion with other smart devices.
9. Warranty & Support
Manufacturer Information
Manufacturer: Nanchang bimai trading co., ltd
Address: Room 1-352 south floor, nanchang boli middle hang city, no. 99, east 2nd road, xinxiqiao, qingyunpu district, nanchang city, jiangxi province
Contact: G2wqAv788TmZh@163.com / +8613352681873
EU Authorized Representative
Representative: Outong GmbH
Address: Brehmstr, 56, 40239 Duesseldorf
Contact: info@outong.de / +49 21131054698
For further assistance or warranty claims, please contact the manufacturer or the EU authorized representative using the details provided above.