1. Important Safety Instructions
Please read all safety instructions carefully before using the appliance.
- Do not place the vacuum cleaner close to heat sources, radiation, or burning cigarettes.
- Do not use the appliance to remove the following objects:
- All liquids such as water and solvents.
- Lime, cement, ash, and other construction dust and garbage.
- Hot objects, such as cigarette butts.
- Sharp debris, such as glass shards, etc.
- No flammable and explosive articles, such as gasoline or alcohol products.
- Do not let children play with and operate the vacuum cleaner to prevent accidents.
- Your vacuum cleaner is an electric appliance: it must be used appropriately. Do not leave the operating vacuum cleaner unattended.
- The power must be turned off during cleaning, maintenance, or when in storage.
- Do not pull the power plug to turn off the vacuum cleaner. Hold the plastic part of the plug to remove it from the power socket.
- The power supply voltage must correspond to that of the vacuum cleaner charging voltage.
- Keep the power cord away from sharp objects to prevent it from being damaged.
- To prevent fires, do not immerse the vacuum cleaner in water or expose it to any heating appliances.
- Do not drag the power cord when moving the charging station.
- In case of damage (e.g., dropped vacuum, damaged power cord), do not use the vacuum cleaner and send it immediately to the nearest approved maintenance facility.
- Stop operating the vacuum cleaner if the suction inlet is blocked to prevent damages (such as overheating) to the motor or deformations to the vacuum plastic part occasioned by overheating motor.
2. Product Parts List
The INSE S9X Cordless Vacuum Cleaner comes with the following components:
- Retractable Metal Tube (x1)
- Main Motor (x1)
- Motorized Cleaner Brush (x1)
- Wall Bracket (x1)
- Adapter (x1)
- HEPA Filter (x1)
- V Rubber Brush (x1)
- Battery Pack (x1)
- Long Crevice Tool (x1)
- 2-in-1 Brush (x1)
- 2-in-1 Cleaning Gadget (x1)
- User Manual (x1)
- Quick Start Guide (x1)
3. Product Schematic & Parameters
LED Display Indicators:
- Battery Indicators: Shows current battery level.
- Power Mode Indicators: Displays the selected suction mode (Eco, Mid, Max, Auto).
- Automatic Dust Detection Mode: Indicates when the vacuum is automatically adjusting suction based on debris.
Product Specifications:
| Attribute | Value |
|---|---|
| Model No. | S9X |
| Operating Voltage | 25.9V |
| Power Adapter Output | 31V ⎯ 500mA |
| Power Adapter Input | 100-240V~50/60Hz |
| Charging Time | 4.5 Hours |
| Dust Box Capacity | 1L |
| Battery Cells | 7 Cells |
| Product Weight | 4.3kg |
| Battery Capacity | 2000mAh |
| Package Dimension | 43.9*33*19 cm |
| Hign-concerned Chemical | None |
| Weight | 3-6 kg |
| Number of nozzles | 1-3 nozzles |
| Number of operating modes | 3-4 |
| Battery Type | Li-ion |
| Liquid tank volume | <3l |
| Turbo Brush | No |
| Filter Type | HEPA |
| LCD | No |
| Cleaning Route | Random Type |
| Bag Or Bagless | Bagless |
| Cord Length (m) | WireLess |
| Timing Reservation | No |
| Special Suction Nozzle | Crevice Nozzle |
| Dust Storage Type | Dust Box/Dust Bucket |
| Installation | Hand Held |
| Certification | CE |
| Power (W) | 400 |
| Function | Dry |
| Origin | Mainland China |
| Remote Control | No |
| Battery Life | 30-59 min |
4. Assembly and Combinations
To assemble the vacuum cleaner, ensure each part clicks into place correctly to avoid airflow issues. To disassemble, press the release button on each part.
Key Assembly Steps:
- Connect the main motor to the retractable metal tube.
- Attach the motorized cleaner brush to the end of the retractable metal tube.
- Ensure all connections are secure with an audible 'click'.
The vacuum cleaner can be used in various configurations:
- Stick Vacuum: Main motor + Retractable metal tube + Motorized cleaner brush. Ideal for floors and carpets.
- Handheld Vacuum with Crevice Tool: Main motor + Long crevice tool. Perfect for tight spaces, corners, and upholstery.
- Handheld Vacuum with 2-in-1 Brush: Main motor + 2-in-1 brush. Suitable for delicate surfaces, blinds, and car interiors.
5. Charging
Before first use, fully charge the battery. The product is not fully charged for safety during delivery. Always use the original charger. Full charge takes approximately 4-4.5 hours. The vacuum cannot be turned on while charging for safety.
Battery Charging Signal:
- Room temperature higher than 30℃ or recharging immediately after use may extend charging time.
- Always recharge after each usage.
- Unplug when not charging.
- If not in use for more than two months, disconnect from power supply and charge once every two months to ensure longer service life.
- The vacuum cleaner or adapter may become hot during charging; take necessary precautions to avoid contact.
Charging Methods:
- Direct Charging: Insert the power plug into the charging port on the main motor; connect the power adapter with the power supply.
- Detachable Battery Charging: Remove the battery pack from the main motor and charge it separately using the adapter.
Charging Indicators:
- Battery indicators on the LED display show the battery-electric quantity when charging.
- The color breathing lamp indicates battery status:
- 0-39% shows red
- 40-69% shows purple
- 70-100% shows blue
- The light will turn off after about an hour when fully charged.
6. Operating the Vacuum Cleaner
Power On/Off:
- Press the power switch once to turn on the vacuum.
- Press the power switch twice to turn off the vacuum.
Suction Modes:
The vacuum cleaner offers four suction modes, which can be cycled through by pressing the mode switch:
- Auto Mode: (Default when turned on) Automatically adjusts suction power based on debris level detected by the infrared sensor. It may take a few seconds for the dust to trigger the sensor.
- Eco Mode: (Press mode switch once) Up to 55 minutes runtime.
- Medium Mode: (Press mode switch twice) Up to 25 minutes runtime.
- High Mode: (Press mode switch thrice) Up to 13 minutes runtime.
Cleaning Features in Action:
7. Maintenance and Cleaning
Regular maintenance ensures optimal performance and extends the lifespan of your vacuum cleaner.
Emptying the Dust Box:
- Ensure the amount of trash does not exceed the Max Line.
- Press the dust box open button to empty the contents after each use.
Cleaning the Filtration System:
The vacuum cleaner features a 5-stage high-efficiency filtration system. This includes a stainless steel strainer, cyclonic cone, strong cyclone separator, HEPA filter, and high-density sponge.
- Open the dust box and rotate the strainer to take it out.
- Remove the HEPA filter and Cotton Filter.
- Wash the strainer and cyclonic with cold water.
- Clean the HEPA filter and cotton filter with the provided cleaning tool.
- Important: The HEPA filter cannot be washed with water. Only the washable filter components should be rinsed.
- Ensure the strainer, cyclonic, and cotton filter are completely dry before refitting.
- Never operate the vacuum without all filters installed.
- Replace the HEPA filter according to your usage frequency to maintain optimal suction.
8. How to Install the Roller Brush
The V rubber brush is suitable for both low and medium pile carpets and hard floors.
Replacing the Roller Brush:
- Press and hold the release button on the motorized cleaner brush.
- Pull the V rubber brush out from the side.
- Insert the desired roller brush (e.g., soft roller for hard floors or V-shaped rubber roller for carpets) into the slot until it clicks into place.
9. Storage
The INSE S9X is designed for convenient storage with its wall-mount feature.
Wall Bracket Installation:
- Choose a suitable location on a wall for mounting.
- Tear off the tape from the wall bracket and attach it to the wall.
- Punch two holes in the wall at the marked positions.
- Insert screws into the plastic case of the wall bracket.
- Nail the wall bracket to the wall with screws for secure mounting.
Storage Positions:
- Wall-Mounted Standing: The vacuum cleaner can be stored upright on the wall bracket.
- Against Wall Standing: The vacuum can also stand upright against a wall without the bracket if preferred.
10. Troubleshooting
If you encounter any issues, refer to the table below for common problems and solutions. If the problem persists or is not listed, please contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine stops working | Low battery or no battery power. Accessory is blocked. | Charge battery (4-4.5 hours). Check and remove blockages in attachments. Clean all filters. |
| No suction power | Dust box is full. Filters are blocked. Accessory is blocked. | Empty dust box. Clean all filters and ensure they are dry. Replace HEPA filter if necessary. Check and remove blockages in attachments. |
| Roller brush stops spinning | Roller brush tangled. Problem with metal tube or motorized clean head. | Remove tangle (color breathing lamp will show red). Contact after-sale service if issue persists. |
| Abnormal sound | Accessory is blocked. Problem with main motor or motorized clean head. | Check and remove blockages in attachments. Contact after-sale service if issue persists. |
| Twinkle "E1" Indicator (Overheat Protection) | Check and remove blockages in attachments. Check and clean all filters. | |
| Twinkle "E2" Indicator (Abnormal Voltage) | Check and use the original charger. | |
| Twinkle "EE" Indicator (Roller Brush Tangles) | Remove the tangle. |
11. User Tips
- Maximize Runtime: For longer cleaning sessions, consider purchasing an additional detachable battery. This allows you to swap batteries and continue cleaning without waiting for a recharge.
- Optimal Suction: Regularly clean all filters, especially the HEPA filter (without washing it), to maintain the powerful 45Kpa suction. A clean filter system is key to efficient cleaning.
- Versatile Cleaning: Utilize the retractable metal tube and various attachments (crevice tool, 2-in-1 brush) to reach high areas like curtains, tight corners, and car interiors, making the most of the vacuum's adaptability.
- Floor-Specific Cleaning: Use the appropriate roller brush for your floor type. The soft roller is ideal for hard floors, while the V-shaped rubber roller is designed for carpets to prevent tangles.
12. Warranty and Support
This warranty term gives you specific legal rights, and you may also have other rights which vary from state to state.
12-month Warranty & Lifetime Customer Support:
- Applies only to eligible purchases made directly from authorized distributors.
- Warranty coverage applies to the original owner and to the original product only and is not transferable.
How to Initiate a Warranty Claim:
If your appliance operates improperly under normal household conditions within the warranty period, please contact our customer support at support@vacservice.vip to fill out the warranty form and initiate a claim.
You can also scan the QR code below to activate your warranty, access FAQs, and contact support:
For a complete and detailed user manual, including additional languages, please refer to the official PDF document available via the seller's support channels.