1. Important Safety Information
Please read all instructions carefully before using this device. Failure to follow safety guidelines may result in injury or device malfunction.
Precautions:
- Discontinue use immediately if you experience discomfort during operation.
- Remove all metal objects from your body before use.
- Do not exceed 30 minutes per treatment area. Allow at least 1 hour between sessions on the same area.
- For first-time users, start at the lowest intensity level and gradually increase after acclimation.
- Unauthorized disassembly, repair, or modification of this product is strictly prohibited.
- Do not use this product while: driving, sleeping, exercising, or bathing/showering.
- After use, turn off the device and store it out of children's reach.
Contraindications:
The following individuals must NOT use this product:
- Individuals with pacemakers.
- Pregnant women.
- Persons lacking consciousness.
- Patients with malignant tumors.
- Persons with heart conditions.
2. Product Overview
The SANPKON Multifunctional Massager is an Electrical Muscle Stimulator (EMS) and Transcutaneous Electrical Nerve Stimulation (TENS) device designed for physiotherapy and body massage. It features 4 independent output channels, 15 massage modes, and 30 adjustable intensity levels, all controlled via an easy-to-view LCD display.
Package Contents:
Ensure all items are present in the package:
- Massager * 1
- Electrode pad * 8pcs (4 pairs)
- Electrode wire * 4
- USB charging cable * 1
- Manual * 1 (English)
- Box * 1

Image: Package contents including the massager unit, electrode pads, wires, and charging cable.
Device Components:

Image: Labeled diagram of the massager's front panel and controls.
- Output Ports A, B, C, D: Connect electrode wires.
- Screen Display Area: Shows time, mode, frequency, and strength for each channel.
- Mode Display: Indicates the current massage mode.
- Strength Display: Shows the intensity level for each channel.
- Battery Level Display: Indicates remaining battery charge.
- Time Display: Shows remaining treatment time.
- M (Mode Selection) Button: Cycles through massage modes.
- F (Frequency Selection) Button: Switches between high and low frequency.
- T (Time Selection) Button: Adjusts treatment duration.
- + Button: Increases intensity.
- - Button: Decreases intensity.
- ON/OFF Switch: Power on/off the device (located on the side).
- USB-C Port: For charging the device.
3. Setup and Charging
Charging the Device:
The device has a built-in 2000mAh lithium battery and is rechargeable via a USB-C port.
- Locate the USB-C charging port on the side of the device.
- Connect the provided USB charging cable to the device and a suitable USB power adapter (not included).
- The battery level display on the screen will indicate charging status.

Image: USB-C charging port.
Connecting Electrode Pads:
- Connect the electrode pad to the electrode wire.
- Stick the electrode pad firmly to the part of the body that needs massage. Ensure skin is clean and dry for optimal adhesion.
- There are four output ports (A/B/C/D). Select the output port you want to use.
- Insert the electrode cable into the chosen output port (e.g., output port A).
Video: Demonstration of connecting electrode pads and wires to the device and applying them to the arm.
4. Operating Instructions
Power On/Off:
Slide the ON/OFF switch (located on the side of the device) to turn the machine on or off.
Time Adjustment:
- After powering on, the default time is 20 minutes.
- To adjust the time, press the "T" key.
- Available time settings are 10 minutes, 20 minutes, and 30 minutes.
Frequency Adjustment:
- The default frequency is high frequency.
- Press the "F" key to switch the frequency between high and low.
Mode Selection:
- There are 15 modes in total. The mode display shows the mode used last time.
- To select a mode for a specific output channel (e.g., A), first press the corresponding channel button (e.g., "A" button).
- Then, press the "M" button to cycle through the 15 available modes.
- The corresponding modes for A/B/C/D output are displayed on the screen.
Intensity Adjustment:
- The screen displays the intensity for each channel (A, B, C, D).
- To adjust the intensity for a selected channel, press the "+" or "-" buttons.
- There are 30 gears (levels) of intensity to adjust. Start with a low intensity and gradually increase to a comfortable level.

Image: Strength adjustment levels and full body application areas.
Using Multiple Channels:
The device features 4 fully isolated channels (A, B, C, D), allowing you to operate them simultaneously with independent mode and intensity settings. This is like operating four separate machines at the same time.

Image: Four independent output channels and suggested application areas.
Application Areas:
The massager is designed for full body massage and relaxation, including but not limited to:
- Shoulder
- Back
- Lumbar
- Hand
- Leg
- Neck
- Facial (use with caution and appropriate mode/intensity)

Image: Multifunctional Massager in use with electrode pads.
5. Maintenance
- Cleaning: Wipe the device with a soft, damp cloth. Do not use abrasive cleaners or immerse the device in water.
- Electrode Pads: Replace electrode pads when they lose their adhesiveness. Ensure pads are clean and free of debris before each use.
- Storage: Store the device and accessories in a cool, dry place, away from direct sunlight and out of reach of children.
6. Troubleshooting
- No Power: Ensure the device is fully charged. Check the ON/OFF switch position.
- No Sensation/Weak Sensation: Verify that electrode pads are firmly attached to the skin. Increase the intensity level gradually. Check that electrode wires are securely connected to both the pads and the device output ports.
- Screen Not Responding: Try turning the device off and on again. If the issue persists, ensure the battery is charged.
- Intensity Returns to Zero: When you remove an electrode from your body, the corresponding position's intensity will automatically return to zero after a few seconds as a safety feature.
7. Specifications
| Feature | Description |
|---|---|
| Product Name | Multifunctional Massager |
| Brand Name | SANPKON |
| Application | BODY |
| Input Power | < 10 W |
| Battery Capacity | 2000mAh |
| Rated Current | 180mA |
| Input Voltage | 5V |
| Standard Voltage | 220 V (Note: This refers to the general electrical standard, the device charges via 5V USB-C) |
| Working Modes | 15 Modes |
| Intensity Levels | 30 Levels Adjustable |
| Output Channels | 4 Independent Outputs (A, B, C, D Channels) |
| Display | Easy-to-view LCD Display |
| Battery Type | Built-in Lithium Battery |
| Rechargeable | Yes |
| Buttons | Silicone buttons for better feel |
| Timer | Adjustable Schedule Timer (10min/20min/30min) |
| Package Length | 21 cm |
| Package Width | 21 cm |
| Package Height | 7 cm |
| Package Weight | 0.807 kg |
8. User Tips
- Pad Placement: Experiment with different electrode pad placements to find the most effective positions for your specific pain or muscle relief needs.
- Skin Preparation: Always ensure your skin is clean and free of lotions or oils before applying electrode pads to maximize adhesion and conductivity.
- Gradual Increase: When starting a session or trying a new mode, always begin with the lowest intensity and gradually increase it until you feel a comfortable, yet effective, sensation.
- Hydration: Staying well-hydrated can sometimes improve the effectiveness of TENS/EMS treatments.
9. Warranty and Support
For any questions, technical support, or warranty claims, please refer to the official seller's contact information or the provided user manual PDF for detailed instructions.
A comprehensive user manual in PDF format is available for download: View User Manual (PDF)