RACBOX Motorcycle 36 LED Tail Light Strip

Contents

Motorcycle 36 LED Tail Light Strip User Manual

Model: Motorcycle 36 LED Tail Light Strip

Batch/Serial Number: 020-06

1. Product Information

This product is an auxiliary accessory designed for motorcycle lighting, intended for normal replacement and upgrade of original lights. It is not for illegal modification or use. The product complies with relevant national automotive lighting industry standards and has undergone strict quality testing.

  • Product Name: Rear & Brake Light Assemblies
  • Model Name: LED Tail Brake light
  • Input Voltage: 12V
  • Light Color: Flowing Yellow + Dynamic Red
  • LED Quantity: 36 LEDs
  • Features: Flexible, Stop Brake Lamp, DRL (Daytime Running Light), Flowing Turn Signal
Multiple LED light strips showing red and yellow illumination
Overview of the 36 LED Tail Light Strip, demonstrating its red and yellow light functions.

2. Safety & Warnings

Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.

3. Setup and Installation

Follow these steps carefully to install your new LED Tail Light Strip:

  1. Disconnect Power: Turn off the motorcycle and disconnect the negative battery terminal to prevent short circuits.
  2. Remove Old Taillight: Unscrew the stock taillight, take off the housing, and unplug the wiring connector.
  3. Install New Taillight: Align the new taillight with the mounting holes and fix it with screws. The strip features strong adhesion for secure mounting.
  4. Image showing the adhesive backing being peeled off the LED strip
    The LED strip features strong adhesion for easy and secure mounting.
  5. Wire Connection: Connect the red wire to positive (+) and the black wire to negative (-). Match the function wires (DRL, Brake, Turn Signal) according to the wiring diagram below and wrap all connections with insulating tape.
  6. Wiring diagram showing connections for Negative, Brake lights, DRL, and Turn signal
    Wiring Diagram: Connect Negative (black), Brake lights (red), DRL (green), and Turn signal (yellow) wires.
  7. Test & Finish: Reconnect power, test the running light, brake light, and turn signals. Tidy the wires and reinstall the housing.

4. Operating Instructions

The Motorcycle 36 LED Tail Light Strip offers multiple lighting functions for enhanced visibility and safety:

  • DRL (Daytime Running Light): Provides a constant red light for improved daytime visibility.
  • Brake Light: Illuminates a brighter dynamic red light when the brakes are applied.
  • Turn Signal: Activates a flowing yellow light in the direction of the turn, indicating your intended movement.
Image showing the LED strip illuminated in red for brake lights
The LED strip displays a dynamic red light for brake functionality.
Image showing the LED strip with flowing yellow light for turn signals
The LED strip features a flowing yellow light pattern for turn signals.

Product Demonstration Video

Watch this video to see the light strip's functions in action:

Video demonstrating the flexible nature and various lighting modes (DRL, Brake, Turn Signal) of the motorcycle tail light strip.

5. Maintenance

To ensure the longevity and optimal performance of your LED Tail Light Strip, follow these maintenance guidelines:

  • Cleaning: Gently wipe the surface of the light strip with a soft, damp cloth to remove dirt and debris. Avoid using harsh chemicals or abrasive cleaners.
  • Inspection: Periodically check the wiring connections for any signs of wear, corrosion, or looseness. Ensure the adhesive backing remains secure.
  • Protection: While the strip is designed to be durable, avoid exposing it to extreme temperatures or direct impact that could damage the LEDs or housing.

6. Troubleshooting

  • Light Does Not Turn On: If the light strip does not illuminate after installation, first check all wiring connections to ensure they are secure and correctly matched (positive to positive, negative to negative). If connections are correct, try reversing the plug polarity.
  • Intermittent Function: Check for loose connections or damaged wiring. Ensure the power source is stable and providing the correct 12V.
  • Dim Lighting: Verify that the input voltage is consistently 12V. A lower voltage can result in dim illumination.

7. Specifications

Feature Specification
Model Name LED Tail Brake light
Input Voltage 12V
Light Color Flowing Yellow + Dynamic Red
LED Quantity 36 LEDs
Length 160mm
Width 13mm
Thickness 7mm
Material Flexible strip with adhesive backing
Origin Mainland China
Product size diagram showing dimensions of 160mm length, 13mm width, and 7mm thickness
Detailed product dimensions.

8. User Tips

  • Easy Installation: Users have noted that the product is perfectly functional and easy to assemble, making the installation process straightforward.
  • Bright Illumination: The light strip shines nicely, providing clear and effective signaling as described.

9. Warranty & Support

Manufacturer Information

Manufacturer: Guangzhou Bai Ji Tun Trading Co., Ltd, C116, No. 1489, Fanghua Road Baiyun Guangzhou

EU Authorized Representative: APEX CE SPECIALISTS LIMITED, UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD, CORK, T23 AT2P, IRELAND

Additional Resources

For more detailed information and documentation, please refer to the official user manual PDF. You can find it by searching for 'Item guides & documents' on the product page or by contacting customer support.

10. Frequently Asked Questions (FAQ)

Q: Is this light strip waterproof?
A: While designed for outdoor use on motorcycles, specific waterproof ratings are not provided. It is generally resistant to splashes and light rain, but prolonged submersion should be avoided.
Q: Can I cut the LED strip to a shorter length?
A: It is not recommended to cut the LED strip as it may damage the circuit and render the product inoperable or compromise its functionality. Always use the product as supplied.
Q: What type of adhesive is used?
A: The strip comes with a strong, durable adhesive backing designed for secure attachment to various surfaces. Ensure the surface is clean and dry before application for best results.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.