Ubricks Liebherr LTM11200 Mobile Crane Engineering Model

Contents

Ubricks Liebherr LTM11200 Mobile Crane Engineering Model Instruction Manual

Model: 42146 / E1001

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Ubricks Liebherr LTM11200 Mobile Crane Engineering Model. This highly detailed building block set is designed for adults and features remote control capabilities and numerous realistic functions.

Ubricks Liebherr LTM11200 Mobile Crane Engineering Model (Red and Black) with packaging

Figure 1: Ubricks Liebherr LTM11200 Mobile Crane Engineering Model (Red and Black)

Ubricks Liebherr LTM11200 Mobile Crane Engineering Model (White) with packaging

Figure 2: Ubricks Liebherr LTM11200 Mobile Crane Engineering Model (White)

2. Setup and Assembly

Your Ubricks Liebherr LTM11200 Mobile Crane comes as a comprehensive building block set with 9177 pieces. Detailed step-by-step assembly instructions are provided in the included physical manual.

2.1 Package Contents

  • Building Blocks (9177 pieces)
  • Instruction Manual
  • Sticker Sheet
  • M Motor x 2
  • L Motor x 7
  • XL Motor x 5
  • Li Battery x 4
Image showing the included manual and sticker sheet

Figure 3: Included Manual and Sticker Sheet

Image showing the various motor types and Li-ion batteries included

Figure 4: Motor Drive Components

2.2 Assembly Guidelines

  1. Carefully unpack all components and verify against the parts list in the manual.
  2. Follow the step-by-step instructions provided in the dedicated assembly manual.
  3. Pay close attention to the placement of carbon fiber shafts for structural integrity.
  4. Ensure all motor and battery connections are correctly made as per the manual for remote control functionality.

3. Operating Instructions

The Ubricks Liebherr LTM11200 Mobile Crane features a high level of simulation and numerous functions controlled via remote control.

Video 1: Demonstration of the crane's various functions and capabilities.

3.1 Overview of Functions

Table summarizing the functions of the Chassis, Workbench, and Crane Boom

Figure 5: Overview of Crane Functions

3.2 Chassis Operations

  • Crane Walk and Turning: Control the movement and steering of the crane.
  • Steering Mode Switching: Toggle between 'normal' and 'crab' steering modes for enhanced maneuverability, imitating real crane functionality.
  • Support Legs: Expand, fold, extend, and retract the support legs for stability during operation.
Image illustrating dual mode steering (normal/crab) and two gear switching for movement and leg unfolding

Figure 6: Dual Mode Steering and Two Gear Switching

Image showing the detailed chassis structure of the crane model

Figure 7: Chassis Detail

3.3 Workbench Operations

  • 360° Rotation: The upper structure of the crane can rotate a full 360 degrees.
  • Cockpit Control: The cockpit can be rotated, raised, lowered, tilted up, and tilted down.
  • Counterweights: Disassemble, install, lift, and lower the counterweights as needed.
Image showing the workbench section of the crane model

Figure 8: Workbench Overview

Image detailing the counterweight assembly/disassembly and cab rotation/tilt functions

Figure 9: Counterweight and Cab Functions

3.4 Crane Boom Operations

  • Boom Extension/Retraction: Control the length of the main boom.
  • Boom Lifting/Lowering: Adjust the height of the boom.
  • Superlift: Expand, fold, lift, and lower the Y-Superlift for heavy lifting tasks. The Y-Superlift can expand nearly 90 degrees.
  • Putter: Use the putter for precise lifting and lowering of the boom.
  • Head of Boom: Connect the superlift and hook to the head of the boom.
Image showing the Y-Superlift expanding and the support leg standing alone

Figure 10: Y-Superlift and Support Leg Features

Image detailing the putter, head of boom, and support legs functions

Figure 11: Boom and Support Leg Controls

Image showing the 4-section boom extending to 2.5 meters and the embedded battery for control

Figure 12: 4-Section Boom and Embedded Battery

Image demonstrating the expansion/retraction of support legs and 360 degree turntable rotation

Figure 13: Function Display - Support Legs and Turntable

3.5 Advanced Features

  • Simulated Engine: Features a detailed V8 engine model.
  • Electric Support Legs: Equipped with a powerful transmission box for long stroke and high transmission efficiency.
  • Simulated Cab: Can be remotely controlled from multiple angles to adjust perspective.
  • DIY Expansion: Reserved locations allow for equipping additional motors and connecting auxiliary booms.
  • Carbon Fiber Shafts: Reinforce the structure for strength and accuracy.
  • Counterweight Lift: Utilizes a differential to increase torque and balance weight.
  • Independent Counterweights: Different sizes, easily removable for precise arrangement.
  • 2-Speed Transfer Case: Provides accurate gear shifting, limit protection, and anti-bending beams for operation under high loads.
  • 360° Turntable: Designed with bearings for strong bending resistance and stress distribution.
Image showing the simulated V8 engine and the electric support leg mechanism

Figure 14: Simulated Engine and Electric Support Leg

Image showing the simulated cab and areas for DIY expansion with motors

Figure 15: Simulated Cab and DIY Expansion

Image detailing the counterweight lift, independent counterweights, 2-speed transfer case, and 360 degree turntable

Figure 16: Advanced Mechanical Features

4. Maintenance

To ensure the longevity and optimal performance of your Ubricks Liebherr LTM11200 Mobile Crane, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to gently wipe down the model. Avoid using harsh chemicals or abrasive materials that could damage the plastic.
  • Storage: Store the model in a cool, dry place away from direct sunlight and extreme temperatures. Keep it in its original packaging or a dust-free container to prevent dust accumulation.
  • Battery Care: When not in use for extended periods, remove the Li-ion batteries from the model to prevent leakage and damage. Recharge batteries only with compatible chargers.
  • Component Check: Periodically inspect all connections and moving parts to ensure they are secure and functioning correctly. Tighten any loose connections if necessary.

5. Troubleshooting

If you encounter any issues with your Ubricks Liebherr LTM11200 Mobile Crane, refer to the following common troubleshooting tips:

  • Missing Pieces: If you find any missing pieces during assembly, refer to the parts list in your manual and contact customer support for assistance.
  • Functionality Issues: Ensure all motors are correctly installed and connected to the battery packs. Check that batteries are charged and properly inserted.
  • Remote Control Not Responding: Verify that the remote control batteries are fresh and correctly inserted. Ensure the model's power is on and it is within the remote control's operating range.
  • Stiff Movement: Check for any misaligned or jammed blocks. Ensure all gears and shafts are free from obstruction and properly lubricated if applicable (though typically not required for building blocks).

6. Specifications

AttributeDetail
Model Number42146 / E1001
MaterialPlastic (ABS)
Quantity of Items in Set9177 pieces
Product Dimensions (Assembled)Approx. 96.8 cm (Length) x 29.0 cm (Height) x 60.0 cm (Width)
Scale1:1 (Note: This scale may refer to specific components or a conceptual representation, as the model is a scaled replica.)
FeaturesAll wheel steering system, Elevated independent counterweight, 4-section extended extra long crane boom (up to 2.5m), Carbon fiber shaft reinforcement, Reserved DIY expansion location, Independent crane boom, Remote Control functionality.
Available ColorsRed and Black, White
Power Components2 M Motors, 7 L Motors, 5 XL Motors, 4 Li Batteries
Diagram showing the top and side dimensions of the assembled crane model

Figure 17: Product Dimensions

Image highlighting key features and specifications of the LTM11200 model

Figure 18: Key Features and Specifications

Image showing the two available color options: Red and Black, and White

Figure 19: Available Colors

7. User Tips

  • Organize Pieces: Before starting assembly, sort the pieces by color, size, or type to make the building process smoother and faster.
  • Follow Manual Closely: The complexity of this model requires careful adherence to the instruction manual. Double-check each step before proceeding.
  • Test Functions Periodically: As you build sections with motors and moving parts, test their functionality to catch any errors early.
  • Battery Management: Fully charge all Li-ion batteries before first use. For best performance, ensure batteries are adequately charged before operating the crane.
  • Display with Care: Due to its size and intricate details, choose a stable and prominent location for displaying your completed model.

8. Warranty and Support

For any inquiries, missing parts, or technical support regarding your Ubricks Liebherr LTM11200 Mobile Crane, please contact the seller directly. We are committed to ensuring customer satisfaction.

Contact Information:

  • WhatsApp: +86 17873574992
  • Email: xy18001@126.com
  • Facebook/WeChat: +86 17873574992
Image detailing seller's strengths including product richness, quality assurance, service guarantee, and contact information

Figure 20: Seller Support Information

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.