Product Overview
The Xiaomi Automatic Soap Dispenser is a touchless hand soap dispenser designed for hygiene and convenience. It features infrared sensing for quick dispensing, a large 600ml capacity, and is IPX7 waterproof. This manual provides instructions for its proper use and maintenance.
Overview of the Xiaomi Automatic Soap Dispenser highlighting key features like infrared sensing, 0.15s liquid dispensing, table and wall-hanging options, 600ml capacity, and IPX7 waterproof rating.
Package Contents
Please check the package for the following items:
- Automatic Soap Dispenser Unit (Foam or Liquid Gel Version)
- USB-C Charging Cable
- Wall Mount Hook (adhesive)
- User Manual (this document)
Setup
1. Charging the Device
The dispenser is powered by a rechargeable battery. Before first use, ensure the device is fully charged.
- Locate the USB-C charging port, usually at the back or bottom of the unit.
- Connect the provided USB-C cable to the dispenser and a suitable USB power adapter (not included).
- The LED indicator will show charging status (e.g., breathing light). Charge until the indicator shows a full charge.
2. Filling the Soap Reservoir
The dispenser has a 600ml capacity reservoir.
- Twist the soap reservoir counter-clockwise to detach it from the main unit.
- Pour liquid hand soap into the reservoir. For foam versions, you may need to dilute liquid soap with water (typically 1:3 or 1:4 ratio, depending on soap consistency) to achieve optimal foam.
- Reattach the reservoir by aligning it with the main unit and twisting clockwise until secure.
3. Placement Options
The dispenser can be used on a countertop or mounted on a wall.
Countertop Use:
Place the dispenser on a flat, stable surface near a sink. Ensure there is enough space for hands to be placed under the sensor without obstruction.
Wall Mounting:
The dispenser comes with an adhesive wall mount hook for drill-free installation.
- Clean and dry the desired wall surface thoroughly.
- Peel off the protective film from the adhesive wall mount hook.
- Press the hook firmly onto the wall for at least 30 seconds. Wait for 24 hours before hanging the dispenser to ensure maximum adhesion.
- Align the dispenser's back slot with the wall mount hook and slide it down to secure.
The dispenser can be used on a countertop or conveniently mounted on a wall using the provided adhesive hook.
Operating Instructions
1. Power On/Off
Locate the power button, typically on the top or back of the unit. Press and hold the button for a few seconds to turn the dispenser on or off. The LED indicator will light up to confirm power status.
2. Automatic Dispensing
The dispenser uses infrared induction for touch-free operation.
- Ensure the dispenser is powered on.
- Place your hand 4-6 cm below the outlet nozzle.
- The infrared sensor will detect your hand, and soap (foam or liquid) will be dispensed automatically within 0.15 seconds.
Place your hand 4-6 cm below the outlet for quick, touch-free soap dispensing.
3. LED Indicator (Breathing Lamp)
The dispenser features an LED breathing lamp that indicates various statuses, such as power on, dispensing, and potentially charging or low battery warnings. The F5 breath light also indicates when the dispenser is ready for use.
Maintenance
1. Regular Cleaning
To maintain hygiene and optimal performance, clean the dispenser regularly.
- Wipe the exterior of the dispenser with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Ensure the sensor area is kept clean and free from soap residue or obstructions.
- The device is IPX7 waterproof, meaning it can withstand immersion in water up to 1 meter for 30 minutes. However, avoid prolonged submersion and ensure the charging port cover is securely closed if present.
2. Self-Cleaning Mode
The dispenser includes a self-cleaning function to prevent clogging and maintain internal cleanliness.
- Long press the power button for 3 seconds to enter automatic cleaning mode.
- The 4 gear lights and color lights will all illuminate.
- The dispenser will emit bubbles only when a hand is close to the sensor during this mode.
- The total duration of the self-cleaning cycle is 20 seconds. The mode will exit automatically after this time.
Activate self-cleaning mode by long-pressing the power button for 3 seconds.
3. Refilling Soap
When the soap level is low, refill the reservoir as described in the 'Setup' section.
Troubleshooting
- No soap dispensed:
- Check if the dispenser is powered on.
- Ensure the soap reservoir is not empty.
- Verify that your hand is placed within the 4-6 cm sensing range.
- Clean the sensor area for any obstructions.
- If using foam version, ensure soap is adequately diluted.
- Check battery level and recharge if necessary.
- Weak or inconsistent dispensing:
- The soap might be too thick; try diluting it further (for foam versions).
- The nozzle might be partially clogged; run the self-cleaning mode.
- Low battery can affect pump strength; recharge the device.
- LED indicator not working:
- Ensure the device is powered on and charged.
- If the issue persists, contact customer support.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | XIAOMI |
| Model Series | P11, P11B, P11S, P11A |
| Power Source | Rechargeable battery |
| Voltage | <20V |
| Capacity | 600ml |
| Induction Distance | 4-6 cm |
| Response Time | 0.15 seconds |
| Waterproof Rating | IPX7 |
| Origin | Mainland China |
| High-concerned chemical | None |
| Package Dimensions (L x W x H) | 20 cm x 10 cm x 10 cm |
| Package Weight | 0.33 kg |
User Tips
- Soap Dilution: For foam versions, experiment with different soap-to-water ratios (e.g., 1:3 or 1:4) to find the ideal consistency for rich foam. Too thick soap can lead to clogging or weak dispensing.
- Sensor Clearance: Keep the area around the infrared sensor clear of any objects or soap drips to ensure consistent and accurate dispensing.
- Regular Charging: To avoid interruptions, charge the dispenser regularly, especially if you notice a decrease in dispensing power or responsiveness.
- Self-Cleaning Frequency: Utilize the self-cleaning mode periodically, particularly when changing soap types or if you observe any blockages, to maintain the internal mechanism.
- Placement: While the dispenser is IPX7 waterproof, avoid placing it directly under running water or in areas where it might be constantly splashed to prolong its lifespan.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official Xiaomi website or contact your local authorized dealer. Keep your purchase receipt as proof of purchase for warranty claims.
A digital version of the user manual may be available for download from the manufacturer's website. For a comprehensive guide, you may refer to the official PDF manual: View User Manual (PDF)