1. Introduction
The Power Train X-GAMERX DL-240 and DL-360 are high-performance integrated liquid CPU coolers designed to provide efficient cooling for your processor. Featuring ARGB lighting synchronization, a durable polymer rubber water cooling tube, and a multi-platform buckle system, these coolers offer both aesthetic appeal and superior thermal management. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting.
2. Package Contents
Before proceeding with the installation, please verify that all components listed below are present in your package:
- CPU Liquid Cooler (Radiator with Fans and Pump)
- Installation Instructions Manual (PDF version available: User manual (PDF))
- Intel Backplate
- Intel Buckle (Mounting Brackets)
- AMD Buckle (Mounting Brackets)
- Intel Screws
- Intel 2011 Screws
- Thermal Grease (Syringe)
- Buckle Screws
- Lock Case Screws
3. Setup and Installation
Follow these steps to install your Power Train X-GAMERX CPU Liquid Cooler. Ensure your system is powered off and unplugged before beginning installation.
3.1. Prepare the CPU and Motherboard
- Clean the CPU surface: Use isopropyl alcohol and a lint-free cloth to remove any old thermal paste from your CPU.
- Apply thermal grease: Apply a small, pea-sized amount of the provided thermal grease to the center of your CPU's integrated heat spreader (IHS).
3.2. Install Mounting Hardware
The cooler supports various Intel and AMD platforms. Select the appropriate backplate and buckles for your CPU socket type.
- For Intel Sockets (LGA1700/115X/1200/20XX):
- Attach the Intel backplate to the rear of your motherboard, aligning the holes with the CPU socket mounting holes.
- Secure the Intel buckles to the pump head using the appropriate Intel screws.
- For AMD Sockets (AM5/AM4/AM3/FM1/FM2):
- Use the existing AMD backplate that comes with your motherboard.
- Secure the AMD buckles to the pump head using the appropriate AMD screws.
3.3. Mount the Pump Head
- Carefully place the pump head onto the CPU, ensuring the thermal paste spreads evenly.
- Tighten the buckle screws in a diagonal pattern until snug. Do not overtighten.
3.4. Install the Radiator and Fans
- Mount the radiator to an available fan mount in your PC case (e.g., top, front, or rear).
- Attach the fans to the radiator using the provided buckle screws. Ensure the fan airflow direction is optimal for your case cooling.
3.5. Connect Wiring
Proper wiring is essential for functionality and ARGB lighting.
- Fan Connections: The fans are wired in parallel on the back, simplifying cable management. Connect the fan power cable to a motherboard 4-pin CPU FAN interface.
- Pump Connection: Connect the pump's 4-pin power cable to a dedicated AIO_PUMP or CPU_OPT header on your motherboard.
- ARGB Lighting: Connect the 5V-3pin ARGB cable from the pump and fans to a compatible 5V-3pin ARGB header on your motherboard. This allows for software control and synchronization of lighting effects.
4. Operating Instructions
4.1. Power On and Initial Check
After installation, power on your computer. Verify that the fans are spinning and the pump is operating (you may hear a faint hum). Check your motherboard's BIOS/UEFI or monitoring software to confirm CPU temperatures are within normal limits.
4.2. PWM Temperature Control
The cooler features a built-in PWM chip that automatically adjusts fan speed based on CPU temperature. This ensures optimal cooling performance while minimizing noise.
- When CPU temperature rises, the fan speed increases to cool down the CPU quickly.
- When CPU temperature drops, the fan speed decreases to save energy and reduce noise.
You can typically configure fan curves in your motherboard's BIOS/UEFI settings or through manufacturer-provided software.
4.3. ARGB Lighting Synchronization
The pump head and fans support Addressable RGB (ARGB) lighting, offering over 16 million colors and various effects. This can be synchronized with compatible motherboard software (e.g., ASUS Aura Sync, RGB Fusion, Polychrome Sync, MSI Mystic Light) via the 5V-3pin ARGB header.
5. Maintenance
Regular maintenance helps ensure optimal performance and longevity of your liquid cooler.
- Dust Cleaning: Periodically clean dust from the radiator fins and fan blades using compressed air. Ensure fans are not spinning during cleaning.
- Tube Inspection: Check the polymer rubber water cooling tubes for any signs of kinks, damage, or leaks. The 400mm braided tubes are designed for durability.
- Pump Check: Listen for any unusual noises from the pump. A consistent, low hum is normal.
- Thermal Paste: While not frequently required, if you ever remove the pump head, reapply fresh thermal paste before reinstallation.
6. Troubleshooting
If you encounter issues with your liquid cooler, refer to the following common troubleshooting steps:
- No Power/No RGB:
- Check all power connections (4-pin fan, 4-pin pump) and ARGB connections (5V-3pin) to the motherboard.
- Ensure the motherboard headers are correctly configured in BIOS/UEFI.
- High CPU Temperatures:
- Verify the pump is running.
- Ensure fans are spinning and oriented correctly for airflow.
- Check if the pump head is securely mounted to the CPU.
- Confirm thermal paste application was sufficient and even.
- Clean any dust buildup on the radiator fins.
- Excessive Noise:
- Check for loose fan screws or vibrations.
- Ensure cables are not interfering with fan blades.
- Adjust fan curves in BIOS/UEFI to reduce fan speed at lower temperatures.
- If the pump is making unusual grinding noises, contact support.
- Leaking:
- Immediately power off your system and disconnect power.
- Carefully inspect tubes and fittings for any signs of leakage.
- Contact customer support immediately.
7. Specifications
Detailed specifications for the Power Train X-GAMERX DL-360A liquid cooler (DL-240 specifications will vary slightly in radiator size, fan count, and cold drain count):
| Feature | Specification (DL-360A) |
|---|---|
| Model Number | DL-240/DL-360 |
| Radiator Size | 393 × 120 × 27mm (for DL-360A) |
| Rated Voltage | DC 12V |
| Fan Size | Φ120 × 25mm |
| Cold Drain | 12 Drains (for DL-360A) |
| Pump Size | Φ65 × 48mm |
| Bearing | Sensorless Motor Ceramic Shaft |
| Pump Speed | 2550 ± 10% RPM |
| Power Interface | 5V 3PIN ARGB + 4PIN |
| Fan Speed | 600-1800 ± 10% RPM |
| Fan Noise | 36.9 dBA ± 10% |
| Air Flow | 58 CFM ± 10% |
| Cooler Material | Copper & Aluminum |
| RGB Support | A-RGB |
| Type | CPU All In One |
| With Liquid | Yes |
| Supported CPU Sockets | Intel LGA 1700/20XX/115X/1200, AMD AM5/AM4/AM3/FM2/FM1 |
8. Warranty and Support
The Power Train X-GAMERX DL-240/360 CPU Liquid Cooler comes with a 1-year warranty, ensuring worry-free after-sales service. For detailed warranty terms, technical support, or further assistance, please refer to the official product page or contact your retailer.
A comprehensive user manual in PDF format is available for download: User manual (PDF).
9. User Tips
- Cable Management: Take advantage of the hidden fan wiring to keep your build clean and improve airflow within your case.
- Software Control: Utilize your motherboard's ARGB software to customize lighting effects and create a personalized aesthetic for your PC.
- BIOS Settings: Ensure your motherboard's BIOS/UEFI is updated and that fan/pump headers are configured for PWM control to benefit from the cooler's automatic speed regulation.
- Airflow Direction: Experiment with fan orientation (intake vs. exhaust) on your radiator to find the best balance between CPU cooling and overall case temperature for your specific setup.