1. Product Overview
The RACBOX H4 Mini LED Projector Lens Headlight Bulbs are designed to provide superior illumination for your vehicle. Utilizing advanced LED technology, these bulbs offer enhanced brightness, a precise beam pattern, and a long lifespan, serving as an excellent upgrade or replacement for standard halogen headlights.
Image: Pair of RACBOX H4 Mini LED Projector Lens Headlight Bulbs with example low and high beam patterns.
2. Safety & Warnings
Please read all instructions carefully before installation and use. Failure to follow these instructions may result in damage to the product, vehicle, or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture beyond its IP67 rating during installation or operation.
- Ensure the vehicle's engine is off and the existing lamps are cool before handling.
3. Setup and Installation
This product is designed for plug-and-play installation in most H4 headlight housings. Professional installation is recommended if you are unfamiliar with automotive electrical systems.
Installation Steps:
- Turn off the vehicle's engine and ensure the existing headlight lamps are cool to the touch.
- Disconnect the power connector from the original headlight bulb.
- Carefully remove the factory halogen bulb from the headlight housing.
- Install the new RACBOX H4 Mini LED Projector Lens bulb into the headlight housing, ensuring it is seated correctly and securely.
- Connect the LED driver (if separate) and secure it properly, away from heat sources or moving parts.
- Reconnect the power connector to the new LED bulb.
- Test the light function (low beam and high beam) before reassembling the headlight assembly.
- Reassemble the headlight assembly, ensuring all covers and seals are properly in place.
Note: If the light does not turn on after installation, please reverse the plug polarity and retest.
Video: Product demonstration and installation guide for the H4 Mini LED Projector Lens.
4. Operating Instructions
These LED projector lens bulbs provide both low beam and high beam functionality, integrated into a single unit. The advanced design ensures a clear cut-off line for the low beam and a powerful, focused light for the high beam.
- Low Beam: Provides a wide, even spread of light with a sharp cut-off to prevent glare for oncoming traffic.
- High Beam: Activates an additional spot light and intensifies the main beam for maximum visibility at longer distances.
Image: Comparison of the precise low beam cut-off and the concentrated high beam + spot light effect.
Light Pattern Options:
The RACBOX H4 Mini LED Projector Lens is available in Left-Hand Drive (LHD) and Right-Hand Drive (RHD) configurations to suit different regional traffic regulations. Ensure you have the correct version for your vehicle.
Image: Example of the product configured for Right Hand Drive vehicles (e.g., UK, Australia).
5. Maintenance
These LED headlight bulbs are designed for long-term, maintenance-free operation. To ensure optimal performance and longevity:
- Keep the outer lens of your vehicle's headlight assembly clean from dirt, dust, and debris.
- Avoid using abrasive cleaners on the headlight lens, as this can scratch the surface and affect light output.
- Periodically check the connections to ensure they remain secure.
- Do not attempt to disassemble the LED bulb or its driver, as this will void any potential warranty and may damage the product.
6. Troubleshooting
- Light does not turn on:
- Ensure all connections are secure and properly seated.
- Check the vehicle's fuse for the headlights.
- Reverse the plug polarity (disconnect, flip the connector, and reconnect).
- Verify that the vehicle's voltage is within the operating range (DC 10-16V).
- Light flickers:
- Ensure connections are tight.
- Some vehicles may require an additional CANBUS decoder to prevent flickering or error messages.
- Beam pattern is incorrect or misaligned:
- Ensure the LED bulb is correctly seated and oriented in the headlight housing.
- Adjust the headlight assembly according to your vehicle's manual if necessary.
7. Specifications
Image: Detailed product specification diagram including dimensions and technical data.
| Feature | Specification |
|---|---|
| Model Name | H4 Mini LED Projector Lens |
| Operating Voltage | DC 10-16V |
| Nominal Power | 70W (Low Beam) / 90W (High Beam) per piece |
| Color Temperature | 6000K White |
| Body Materials | Aluminum 6063 |
| Waterproof Grade | IP67 |
| Operating Temperature | -40 °C to +80 °C |
| Lifespan | 50,000 Hours |
| Heat Dissipation | Unique Double Copper Tube, Liquid Cooling Pipe |
| Light Pattern | LHD/RHD (Left-Hand Drive / Right-Hand Drive) |
| Fitment | Universal fit for cars and motorcycles |
8. User Tips
- Verify Compatibility: Although universal, always double-check your vehicle's specific headlight housing and electrical system requirements before purchase and installation.
- Beam Adjustment: After installation, it's advisable to check and adjust your headlight beam alignment to ensure optimal road illumination and to avoid dazzling other drivers.
- Cleanliness: Keep your headlight lenses clean for maximum light output and clarity.
- Professional Help: If you encounter any difficulties during installation or troubleshooting, consult with a qualified automotive technician.
9. Warranty & Support
For product support, technical assistance, or warranty inquiries, please contact the manufacturer or your point of purchase.
Manufacturer Information:
Guangzhou Bai Ji Tun Trading Co., Ltd
C116, No. 1489, Fanghua Road Baiyun
Guangzhou, China
Email: tdlaccount@126.com
EU Authorized Representative:
APEX CE SPECIALISTS LIMITED
UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK
NEW MALLOW ROAD, CORK, T23 AT2P, IRELAND
Email: info@apex-ce.com
This product is an auxiliary accessory for automotive lighting and is only used for the normal replacement and upgrade of the original car lights. It meets relevant national automotive lighting industry standards and has undergone strict quality testing.