Shunmaii Mini Amplifier

Contents

Shunmaii CS8673E Digital Audio Power Amplifier

Model: Mini Amplifier

User Instruction Manual

Important Safety Instructions

Before using this product, read and understand all instructions in this manual. Retain this manual for future reference.

  • Intended Use: This product is for household use only. Use only as described in this manual.
  • Product Condition: Do not use the product if it is damaged in any way.
  • User Suitability: This product is intended for persons aged 18 years and above. It may be used by persons with reduced physical, sensory or mental capabilities, or lack of experience/knowledge, only if they are supervised or instructed on safe use and understand the hazards involved.

Product Overview

The Shunmaii CS8673E is a powerful Class D digital audio power amplifier designed for home theater and desktop audio setups. It features Bluetooth 5.0 connectivity for stable, long-distance wireless audio transmission, and supports AUX, USB, and TF card playback for versatile audio sources. With a maximum output power of 50W+50W, it is suitable for driving 4-16Ω passive speakers, delivering clear and clean sound without audible noise even at high output levels.

Key Features:

  • Bluetooth 5.0 for stable and wide compatibility.
  • AUX Audio input.
  • Lossless sound quality.
  • U Disk (USB) Playback.
  • TF Card Playback.
  • Driver-free Plug and Play operation.
  • Powerful 50W+50W output for passive speakers (4-16Ω).

Amplifier Panel Introduction:

Amplifier Panel Introduction

Image: Front panel of the amplifier with labels for controls and interfaces.

  • Previous Piece: Button to go to the previous track.
  • Play / Pause: Button to play or pause audio.
  • Next Track: Button to go to the next track.
  • Input Selection: Button to switch between input modes (BT, AUX, TF, USB).
  • Power Switch (long press): Button to turn the device on or off.
  • Sound Switch (rotary): Rotary knob for volume control.
  • Digital Display: Shows current mode, track time, etc.
  • USB Interface: For U Disk playback.
  • 3.5mm Audio Input Interface (AUX): For wired audio input.
  • TF Card Interface: For TF card playback.

Setup

Follow these steps to connect your audio amplifier:

Amplifier Connection Diagram

Image: Detailed connection diagram showing audio input, speaker outputs, and power input.

  1. Connect Speakers: Connect your passive speakers (4-16Ω impedance) to the 'Speaker R' (Right channel Connector) and 'Speaker L' (Left channel Interface) terminals on the rear of the amplifier. Ensure correct polarity (+ to + and - to -).
  2. Connect Audio Input:
    • AUX Input: Connect your audio source (e.g., smartphone, PC, CD player) to the 'Line' (Audio input interface) using a 3.5mm audio cable.
    • USB/TF Card: Insert a USB drive into the USB interface or a TF card into the TF card interface on the front panel.
    • Bluetooth: Ensure Bluetooth is enabled on your audio source device.
  3. Connect Power: Connect the power adapter to the 'DC IN 9-24V' (Power Outlet) on the rear of the amplifier, then plug the adapter into a suitable power outlet.

Important Note:

  • This power amplifier is designed for passive speakers only. Do not connect active audio devices (e.g., computer audio with built-in amplifiers) or passive subwoofers directly to the speaker output terminals.
  • The speaker output terminals (the four pillars) cannot be connected to 3.5mm headphone plugs or lotus plugs.

Operating Instructions

Power On/Off:

  • Long press the 'ON/OFF' button on the front panel to turn the amplifier on or off.

Volume Control:

  • Rotate the 'VOLUME' knob clockwise to increase volume and counter-clockwise to decrease volume.

Input Selection:

  • Press the 'M' (Input selection) button to cycle through available input modes: Bluetooth (BT), AUX, TF Card, and USB. The digital display will indicate the current mode.

Bluetooth (BT) Mode:

Bluetooth 5.0 Transmission Scheme

Image: Diagram illustrating Bluetooth 5.0 stable signal and long transmission distance.

  1. Switch the amplifier to Bluetooth mode using the 'M' button. The digital display will show 'BT'.
  2. On your audio device (e.g., smartphone), enable Bluetooth and search for available devices.
  3. Select 'CS8673E' (or similar name) from the list to pair.
  4. Once paired, audio from your device will play through the amplifier.

AUX Mode:

  1. Connect your audio source to the 'AUX' input on the front panel using a 3.5mm audio cable.
  2. Switch the amplifier to AUX mode using the 'M' button. The digital display will show 'AUX'.
  3. Play audio from your connected device.

USB/TF Card Playback:

AUX, USB, TF Card Playback Features

Image: Icons representing AUX audio, lossless sound, U disk playback, driver-free plug and play, USB interface, and TF card playback.

  1. Insert a USB drive into the 'USB' interface or a TF card into the 'TF' card interface.
  2. Switch the amplifier to USB or TF mode using the 'M' button. The digital display will show 'USB' or 'TF'.
  3. The amplifier will automatically detect and play audio files from the inserted storage device.
  4. Use the 'Previous Piece', 'Play/Pause', and 'Next Track' buttons to control playback.

Maintenance

  • Keep the amplifier in a dry, well-ventilated area, away from direct sunlight, heat sources, and moisture.
  • Clean the exterior with a soft, dry cloth. Do not use liquid cleaners or aerosols.
  • Ensure proper airflow around the unit to prevent overheating.
  • Do not attempt to open the casing or modify the device, as this will void the warranty and could cause damage or injury.

Troubleshooting

Problem Possible Cause Solution
No power Power adapter not connected or faulty; power outlet not working. Check power connections. Ensure the power adapter is securely plugged in and the outlet is functional.
No sound output Incorrect input mode; speakers not connected; volume too low; faulty audio cable/source. Verify input mode (BT, AUX, TF, USB). Check speaker connections and ensure volume is up. Test with a different audio source or cable.
Bluetooth pairing issues Amplifier not in BT mode; device too far; interference; device already paired. Ensure amplifier is in BT mode. Move device closer. Disconnect from other Bluetooth devices. Restart both amplifier and audio device.
USB/TF card not playing Incorrect input mode; unsupported file format; faulty USB/TF card. Switch to USB/TF mode. Ensure audio files are in a supported format. Try a different USB drive or TF card.
Distorted sound Volume too high; impedance mismatch; faulty speakers/cables. Reduce volume. Ensure speakers are 4-16Ω. Check speaker wires and try different speakers if possible.

Specifications

Product Dimensions

Image: Diagram showing the dimensions of the amplifier.

Feature Detail
Brand Name Shunmaii
Model Number Mini Amplifier (CS8673E chip)
Channels 2 (2.0)
Maximum Output Power 50W + 50W
Speaker Impedance 4-16Ω (passive speakers)
Bluetooth Version 5.0
Input Interfaces AUX (3.5mm), USB, TF Card, Bluetooth
Dimensions (W x H) 100mm (3.93 inches) x 50mm (1.97 inches)
Package Dimensions (L x W x H) 15cm x 14cm x 6cm
Package Weight 0.312 kg
Origin Mainland China
Certification CE

User Tips

  • For optimal sound quality, ensure your audio cables are securely connected and of good quality.
  • When using Bluetooth, keep your paired device within a reasonable range to maintain a stable connection.
  • If experiencing any issues, a simple restart of the amplifier and the audio source device can often resolve minor glitches.

Warranty and Support

For any support inquiries or warranty claims, please contact the manufacturer directly:

  • Manufacturer: Yongzhou Shengyou Trading Co., LTD
  • Address: 2nd floor, No. 7 Meiwan Road, Lengshuitan District, Yongzhou City, Hunan Province, China
  • Manufacturer E-mail: xiabyou@163.com
  • Manufacturer Tel: 18675544801

You may also refer to the official user manual PDF for additional details: User manual (PDF)

Compliance Information

CE FC RoHS Compliance Logos

Image: Compliance logos for CE, FC, and RoHS, indicating product adherence to relevant standards.

This device complies with the following directives and standards:

  • CE: Conforms to European Union health, safety, and environmental protection standards.
  • FC: Conforms to Federal Communications Commission standards.
  • RoHS: Compliant with the Restriction of Hazardous Substances Directive.

This product and its accessories are recyclable. Please dispose of them responsibly at designated collection points.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.