Introduction
This manual provides detailed instructions for the safe and effective use of your Tourmaline Heating Foot Massager with EMS function. Please read this manual thoroughly before operation and retain it for future reference.
Figure 1: Tourmaline Heating Foot Massager (Model YS-205C)
Important Safety Information
To reduce the risk of electric shock, burns, fire, or injury, please observe the following precautions:
- Do not use this product near water or in damp environments.
- Unplug the device from the power outlet when not in use or before cleaning.
- Keep out of reach of children.
- Consult a physician before use if you have any medical conditions, including but not limited to: heart disease, pacemakers, epilepsy, pregnancy, or skin conditions.
- Do not use on open wounds, swollen areas, or inflamed skin.
- Do not operate if the power cord or plug is damaged.
- Do not attempt to repair or disassemble the device yourself. Contact qualified personnel for service.
- Use only the provided power adapter and accessories.
Package Contents
Carefully unpack the box and ensure all items are present and in good condition. If any items are missing or damaged, contact your retailer.
Figure 2: Standard Accessories Included
- Foot Massager Unit (1 pc)
- Power Adapter (1 pc, EU, UK, USA or AU plugs)
- Electrode Pads (4 pairs)
- Electrode Cables (2 pcs)
- Slimming Belt (1 pc)
- Remote Control (1 pc)
- User Manual (1 pc)
Note: Optional accessories like interchangeable adapters, massage balls, massage sticks, non-woven electrode pads, and non-gel electrode pads may be available separately.
Product Overview
Familiarize yourself with the components and controls of your foot massager.
Figure 3: Control Panel and Component Diagram
- Electrode Jack (x2)
- Timer Display
- Mode Display
- Intensity Level Display for Electrode Jacks
- Intensity Level Display for Foot
- Power Switch
- Auto/Manual Mode Switch
- Decrease Button (-)
- Heating Switch (Heat icon)
- Power Jack
- Heating Areas (on footpads)
- Increase Button (+)
- Function Switch (Cycle icon)
Setup Instructions
- Placement: Place the foot massager on a flat, stable surface.
- Power Connection: Insert the power adapter into the Power Jack (10) on the side of the unit, then plug the adapter into a suitable electrical outlet (AC 110V/60Hz or 220V/50Hz).
- Optional Accessory Connection:
- Electrode Pads: Connect the electrode cables to the Electrode Jacks (1) on the unit. Attach the electrode pads to the other end of the cables. Ensure the pads are clean and adhere well to the skin on the desired body area (e.g., arms, legs, back).
- Slimming Belt: Connect the slimming belt to the electrode jacks using the appropriate cables. Wrap the belt around the desired area.
Operating Instructions
- Power On: Press the Power Switch (6) to turn on the device. The display will illuminate.
- Foot Massage: Place your bare feet on the footpads.
- Adjust Intensity: Use the Increase Button (+) (12) and Decrease Button (-) (8) to adjust the EMS intensity for your feet. The intensity level will be shown on the Intensity Level Display for Foot (5).
- Select Mode: Press the Function Switch (13) to cycle through different massage modes. The selected mode will be shown on the Mode Display (3).
- Auto/Manual Mode: Press the Auto/Manual Mode Switch (7) to toggle between automatic and manual massage programs.
- Heating Function: Press the Heating Switch (9) to activate the heating function. Red indicator lights on the Heating Areas (11) will illuminate. Press again to turn off.
- Using Electrode Pads/Slimming Belt:
- Ensure electrode pads are properly attached to your skin.
- Use the Increase Button (+) (12) and Decrease Button (-) (8) to adjust the EMS intensity for the electrode pads. The intensity level will be shown on the Intensity Level Display for Electrode Jacks (4).
- The modes selected for foot massage also apply to the electrode pads.
- Set Timer: The Timer Display (2) shows the remaining session time. The device typically has a default timer setting. Refer to the full user manual for specific timer adjustment instructions if available.
- Remote Control: The remote control allows you to conveniently adjust settings from a distance. Its buttons typically mirror the functions on the main unit (Power, Mode, Intensity, Heat).
- Power Off: Press the Power Switch (6) again to turn off the device after use. Unplug the power adapter from the wall outlet.
Video 1: Demonstration of the foot massager's features and operation.
Maintenance and Care
- Cleaning: Always unplug the device before cleaning. Wipe the main unit with a soft, slightly damp cloth. Do not use abrasive cleaners or immerse the unit in water.
- Electrode Pads: Clean electrode pads according to their specific instructions. Replace pads when they lose their adhesiveness.
- Storage: Store the massager in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective case when not in use.
- Cord Care: Do not wrap the power cord tightly around the unit. Avoid kinking or damaging the cord.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Not plugged in; power switch off; power adapter faulty. | Ensure power adapter is securely plugged into unit and outlet. Press power switch. Try a different outlet. |
| No EMS sensation. | Intensity too low; feet/pads not making good contact; dry skin; faulty pads/cables. | Increase intensity. Ensure bare feet are firmly on pads. Moisten feet/skin if dry. Check electrode pad adhesion. Replace pads/cables if damaged. |
| Heating function not working. | Heating switch off; device malfunction. | Press the heating switch. Allow a few minutes for heat to build. If still not working, contact support. |
| Remote control not working. | Batteries dead; obstruction; remote out of range. | Replace remote control batteries. Ensure no obstructions between remote and unit. Use within close range. |
Specifications
| Model Number | YS-205C |
| Material | Rubber |
| High-concerned chemical | None |
| Type | Other |
| Origin | Mainland China |
| Application | Foot |
| Function | Timing control, EMS, Heating |
| Properties | Massager |
| Voltage | AC 110V/60Hz or 220V/50Hz, DC 9V |
| Power | 20W |
| Product Size | 41cm x 42cm x 8.5cm |
| Net Weight | 3.0 kg |
| Standard Spare Parts | Slimming belt, electrode stickers |
| Operation Method | Remote controller, On-unit buttons |
User Tips
- Start with the lowest intensity setting and gradually increase it to a comfortable level.
- For enhanced EMS sensation, ensure your feet are slightly moist or use a damp cloth to wipe the footpads before use.
- Experiment with different massage modes to find the one that best suits your needs.
- The heating function can be used independently or in conjunction with EMS massage for added relaxation.
- Regular use, as recommended, can contribute to improved blood circulation and muscle relaxation.
Warranty and Support
This product is designed for durability and performance. In case of any issues, please refer to the troubleshooting section first.
- Spare Parts: Free spare parts may be available. Please contact customer support for details.
- Warranty Information: For specific warranty terms and conditions, please contact your point of purchase or the manufacturer directly.
- Customer Support:
- WhatsApp: +86 13407311154
- Email: jx18002@126.com
- Facebook/WeChat: +86 13407311154