IRALAN FX4-1

Contents

IRALAN Lighting Driver Intelligent Dimmable Transformer FX4-1 Instruction Manual

Model: FX4-1

1. Introduction

The IRALAN Lighting Driver Intelligent Dimmable Transformer (Model FX4-1) is designed to provide intelligent control for LED ceiling fan lights. This device allows for dimming, color temperature adjustment, and fan speed control, enhancing the functionality and ambiance of your lighting fixtures. It operates on a wide input voltage range and provides stable DC output for both the fan motor and LED components.

2. Safety Information

  • Always disconnect power at the circuit breaker before installing, servicing, or cleaning the device.
  • Installation should be performed by a qualified electrician in accordance with local electrical codes.
  • Do not operate the device if it is damaged or has frayed wires.
  • Ensure proper grounding to prevent electric shock.
  • Keep the device away from water and high humidity environments.
  • Do not attempt to modify or disassemble the transformer; this will void the warranty and may cause electrical hazards.

3. Package Contents

Please check the package for the following items:

  • 1 x IRALAN Fan Light Controller (Intelligent Dimmable Transformer)
  • 1 x Remote Control
  • (Optional, depending on purchase) LED Light Strip

4. Specifications

Attribute Value
Model Number FX4-1
Input Voltage AC85-265V
Output Voltage DC 72-90V (for LED and Motor)
Current (Typical) 240mA or 340mA (depending on variant)
Frequency 50/60Hz
Material ABS
Certification CCC, CE
Warranty 1 Year
Item Type Lighting Transformers
Compatibility Matches 12-inch, 14-inch phoenix fan leaf (as indicated on device)

5. Setup Instructions

5.1. Wiring the Controller

Refer to the labels on the fan light controller for correct wiring. Ensure all connections are secure and insulated.

  • Input: Connect the AC power supply (AC85-265V) to the 'N' (Neutral) and 'L' (Live) terminals on the controller.
  • Output:
    • Connect the fan motor wires to the 'Motor output' terminals.
    • Connect the LED light wires to the 'LED' output terminals.
IRALAN Fan Light Controller and Remote
Image showing the fan light controller with input/output labels and the remote control. The controller specifies 'N' and 'L' for power input, 'Motor output', and 'LED' output, with a power rating of ND24-28X2 TM 85-265V, current 240mA, output 72-90V 50/60Hz.

5.2. Remote Control Pairing

To pair the remote control with the fan light controller:

  1. Ensure the fan light controller is powered on.
  2. Immediately after turning on the light, press the 'SETUP FAN on/off' button on the remote control.
  3. The pairing process should complete, and the light may flash to indicate successful pairing.
Remote Control Diagram with Pairing Instruction
Diagram of the remote control, highlighting the 'SETUP FAN on/off' button for pairing. The instruction states: 'turn on the light and press this button immediately, the pairing will be done.'

5.3. APP Control Setup

To control the fan light using a smartphone app:

  1. Step 1: Download and Install App
    Scan the QR Code provided in the manual or on the product packaging to download and install the control app on your smartphone.
  2. Step 2: Pair Device
    Turn on the fan light. Open the app and search for the light. Follow the in-app instructions to pair the device. Similar to the remote, you may need to turn on the light and press a specific button within the app immediately for pairing.
App Control Setup Diagram
Diagram illustrating the remote control and app interface for setup. The app section shows a QR code for download and an interface with fan power controls, color temperature adjustment, power switch, and fan/lamp on/off buttons.

6. Operating Instructions

6.1. Remote Control Functions

The remote control provides comprehensive control over your fan light. Refer to the diagram for button layout:

  • Power Button (Top Left): All Off.
  • Timing Setting (1H/2H): Sets a timer for 1 or 2 hours.
  • F/R Button: Reverses the fan's rotating direction.
  • Numbered Buttons (1-6): Control the power/speed of the fan.
  • Brightness Increase (+): Increases the light brightness.
  • Brightness Reduce (-): Reduces the light brightness.
  • Fan On/Off Button: Turns the fan on or off.
  • Color Temperature Change (K button): Adjusts the light's color temperature (e.g., Warm White, Neutral Light, Cool White).
  • Night Lamp Button: Activates a low-brightness night light mode.
  • Lamp On/Off Button: Turns the light on or off.
Fan Light with different color temperatures
Example of fan light displaying Warm White (3000K), Neutral Light (4000K), and Cool White (6500K) color temperatures, achievable via remote or app control.

6.2. APP Control Functions

The mobile app offers similar functionalities to the remote control, with a visual interface:

  • Numbered Buttons (1-6): Control the power/speed of the fan.
  • Color Temperature Slider: Adjusts the light's color temperature.
  • Power Switch: Turns the entire unit on/off.
  • Fan On/Off Button: Turns the fan on or off.
  • Lamp On/Off Button: Turns the light on or off.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the surface of the controller and remote. Do not use liquid or aerosol cleaners.
  • Storage: Store the device in a cool, dry place when not in use for extended periods.
  • Battery Replacement: Replace remote control batteries as needed. Ensure correct polarity.

8. Troubleshooting

  • Device Not Responding:
    • Check if the power supply to the controller is connected and active.
    • Ensure the remote control batteries are not depleted.
    • Attempt to re-pair the remote control or app with the controller (refer to Section 5.2 and 5.3).
  • Light or Fan Malfunctioning:
    • Verify all wiring connections are secure and correct.
    • If issues persist after a few days of use, contact customer support.
  • No RGB Functionality:
    • This model (FX4-1) is designed for dimming and color temperature adjustment, not RGB color changing, unless explicitly stated in your product variant description.

9. User Tips

  • For optimal performance, ensure the remote control has a clear line of sight to the fan light controller during pairing.
  • If you encounter any unexpected behavior, a quick power cycle (turning the light off and on at the main switch) followed by re-pairing can often resolve minor glitches.

10. Warranty and Support

This IRALAN product comes with a 1-year warranty from the date of purchase, covering manufacturing defects. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer directly.

A detailed user manual in PDF format is also available for download: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.