1. Introduction
Thank you for choosing the Pecron E2400LFP Portable Power Station. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read this manual thoroughly before using the product and keep it for future reference.
The Pecron E2400LFP is a high-capacity portable power station featuring a 2048Wh LiFePO4 battery, capable of delivering up to 2400W of continuous power. It is designed for various applications, from home backup to outdoor adventures, offering multiple output options and fast charging capabilities.
Figure 1: Pecron E2400LFP Portable Power Station
2. Package Contents
Please check the package to ensure all items are present:
- Pecron E2400LFP Portable Power Station x1
- AC Charging Cable x1
- MC4 Solar Charging Cable (LSMC4-5GX16) x1
- Car Charging Cable x1
- 12V Alligator Clips x1
- Accessory Pouch x1
- User Instruction Manual x1
3. Product Overview
Familiarize yourself with the ports and functions of your E2400LFP:
Figure 2: Front Panel Layout
- LCD Display
- DC 32V~95V Charging Port (Solar/Car Input)
- DC 12V~18V Charging Port (Solar/Car Input)
- AC 100V~120V Input
- AC 100V~120V Output (x3)
- DC 12V/USB Switch
- AC 100V~120V Switch
- DC12V XT60 Output
- DC12V Auxiliary Output (Cigar Port)
- DC12V(5525) Output
- USB-A/USB-C Ports (USB-A x4, USB-C x2)
- Battery Expansion Port (Rear)
4. Setup
4.1 Initial Charging
Before first use, it is recommended to fully charge your E2400LFP. You can charge it via AC wall outlet, solar panels, or a car charger.
- AC Wall Charging: Connect the AC Charging Cable to the AC Input port (4) and then to a wall outlet. The LCD display will show charging status. Full charge takes approximately 1.5 hours.
- Solar Panel Charging: Connect compatible solar panels to either the DC 32V~95V Charging Port (2) or the DC 12V~18V Charging Port (3) using the MC4 Solar Charging Cable. Ensure solar panel specifications are within the unit's limits (refer to Section 5.2).
- Car Charging: Connect the Car Charging Cable to the DC 12V~18V Charging Port (3) and to your vehicle's 12V accessory outlet.
Figure 3: Multiple Recharging Methods
4.2 Powering On/Off
- DC/USB Output: Press and hold the DC 12V/USB Switch (6) to turn on or off the DC and USB outputs.
- AC Output: Press and hold the AC 100V~120V Switch (7) to turn on or off the AC outputs. Please turn off the AC function if there is no AC load connected to the unit to conserve power.
4.3 LCD Smart Display
The LCD display provides real-time information about the power station's status:
- Charge Indicator: Shows charging status.
- Discharge Indicator: Shows discharging status.
- Net Input/Output Wattage: Current power flow.
- DC Out: DC output status.
- AC Output Wattage(W)/Voltage(V): AC output status.
- AC Out: AC output status.
- PF Value/Remaining Charging/Discharging Time(Hrs): Power factor and estimated time.
- Time Indicator: Current time.
- Wireless Connection: Indicates Wi-Fi status.
- Temperature Alarm: Flashes if the unit overheats.
- Battery SoC(%): State of Charge (battery percentage).
- Voltage(V): Battery voltage.
- AC Overload Alarm: Flashes if AC output exceeds 2400W.
- UPS Function Prompt: Indicates UPS mode is active.
4.4 App Function
The Pecron E2400LFP can be controlled and monitored via the PECRON App:
- Pairing: Long press and hold the DC + AC buttons simultaneously to enter pairing mode.
- Download: Search for