AVACOM SHY-018

Contents

USB Rechargeable RGB LED Night Light

Model: SHY-018 | Brand: AVACOM

Introduction

Thank you for purchasing the AVACOM SHY-018 USB Rechargeable RGB LED Night Light. This versatile and compact lighting solution is designed to enhance the ambiance and functionality of various spaces, including kitchens, wardrobes, closets, and wine cabinets. Featuring remote control, touch dimming, and multiple color options, this light offers convenience and customizable illumination.

AVACOM SHY-018 LED Cabinet Light with remote control and various color settings in cabinets.
The AVACOM SHY-018 LED Cabinet Light, showcasing its remote control, dimmable features, USB charging, and magnetic attachment, installed in various cabinet settings.

Important Safety Warnings

  • Initial Charge: Please fully charge the battery before using the light for the first time. Failure to do so may prevent the light from turning on due to circuit protection. The protection is automatically removed after a full charge.
  • Charging Requirements: Do not use a charging device with an output voltage greater than 5V/1A. Always use a phone charging adapter with safety certification to charge the lamp.
  • Usage During Charging: Do not use the light while it is charging.
  • Environmental Conditions: Keep the product away from sources of fire. Avoid using it in humid or high-temperature environments.
  • Children and Maintenance: Do not allow children to use or touch this product unsupervised. Do not attempt to repair or replace any parts of the product yourself.

Package Contents

Depending on the purchased variant, your package may include:

  • LED Cabinet Light(s) (1, 2, 3, or 4 units)
  • Remote Control (1 unit, if applicable to your variant)
  • USB Charging Cable(s)
  • Metal Plates (for non-ironwork installation)
Package contents showing two LED lamps and one remote control, along with a grid of available light colors.
Example package showing two LED lamps and one remote control, illustrating the variety of light colors available.

Product Overview

The LED cabinet light features a compact, circular design with a central lamp bead. It includes a Type-C charging port and a charging indicator light. The remote control provides comprehensive functionality for managing the lights.

Diagram of the LED light unit showing its Type-C charging port, lamp beads, and charging indicator. Also shows the remote control layout with various buttons.
Detailed diagram of the LED light unit components and the remote control layout, including buttons for power, dimming, color selection, and timer functions.

Light Unit Features:

  • Type-C Charging Port: For convenient recharging.
  • Lamp Beads: Central LED for illumination.
  • Charging Indicator: Red during charging, green when fully charged.
  • Magnetic Base: Built-in magnets for direct attachment to iron surfaces.

Remote Control Functions:

  • ON/OFF Button: Power on or off the lights.
  • Brightness Adjustment: '+' and '-' buttons for infinite dimming.
  • Color Selection: Dedicated buttons for Red (R), Green (G), Blue (B), White (W), and other single colors.
  • Dynamic Modes: 'SMOOTH' for smooth color transitions, 'FADE' for fading effects.
  • Timer Settings: Buttons for 15, 30, and 60 minutes to automatically turn off the lights.

Specifications

FeatureSpecification
Brand NameAVACOM
Model NumberSHY-018
Is Bulbs IncludedYes
Luminous Flux<60
Installation MethodSelf-contained
Is Smart DeviceNo
MaterialABS
Is DimmableYes
Power GenerationSwitch
Voltage5V
Power SourceRechargeable Battery
OriginMainland China
CertificationRoHS, CE
High-concerned chemicalNone

Package Dimensions (Approximate):

  • Length: 14 cm
  • Width: 13 cm
  • Height: 5 cm
  • Weight: 0.064 kg

Setup

1. Charging the Light

  • Connect the provided USB charging cable to the Type-C port on the light unit and a compatible 5V/1A power adapter (e.g., a certified phone charger).
  • The indicator light will be red during charging.
  • Once fully charged, the indicator light will turn green.
  • Ensure the light is fully charged before its first use.

2. Installation

The night light can be placed on a flat surface such as countertops, cabinets, or desktops. For mounting, follow the instructions below:

Option A: Direct Attachment to Ironwork Surfaces

  • The light unit has built-in magnets. Simply attach the light directly to any iron surface (e.g., metal shelves, iron cabinet frames).

Option B: Installation on Non-Ironwork Surfaces

  • Step 1: Place a metal plate on the back of the cabinet light, ensuring it aligns with the magnet on the light unit.
  • Step 2: Remove the protective film from the metal plate.
  • Step 3: Affix the metal plate to a clean, dry, non-ironwork surface where you wish to install the light. Press the metal plate firmly for at least 3 seconds to ensure a secure bond.
  • Step 4: Attach the night light to the installed metal plate.
Diagram illustrating installation methods for LED cabinet lights on ironwork and non-ironwork surfaces.
Installation diagrams for both ironwork (direct magnetic attachment) and non-ironwork surfaces (using an adhesive metal plate).

3. Remote Control Preparation

  • Before first use, remove the insulating paper from underneath the remote control's battery compartment.

Operating Instructions

1. Using the Touch Switch (on the light unit)

  • Power On/Off & Color Cycle: Short press the switch on the light unit to cycle through colors (On > Red > Green > Blue > White > Off).
  • Brightness Adjustment: When the lamp is on, long press the switch to infinitely adjust the brightness.
Image demonstrating the touch-sensitive infinite dimming feature of the LED light, showing brightness levels from 10% to 100%
The touch-sensitive infinite dimming feature allows brightness adjustment from 10% to 100%.

2. Using the Remote Control

The remote control offers comprehensive control over your LED lights. The effective control distance is approximately 5 meters (16 feet), but obstacles may block the signal. A single remote can control multiple lights within its controllable range.

Diagram illustrating the two control methods: Remote Control Mode and Touch Mode.
Illustration of the two control methods: Remote Control Mode for comprehensive adjustments and Touch Mode for quick changes.
  • ON/OFF: Press the ON/OFF button to turn the lights on or off.
  • Brightness Adjustment: Use the '+' and '-' buttons for infinite dimming.
  • Color Selection: Press the dedicated color buttons (R, G, B, W, etc.) to select a single color. The lights support 9 RGB colors.
  • Dynamic Modes:
    • SMOOTH: Activates a smooth color transition mode.
    • FADE: Activates a fading color transition mode.
  • Timer Function: Press the '15', '30', or '60' minute buttons to set the lights to automatically turn off after the selected duration.
Image showing RGB full color lighting with a spectrum of 9 colors and adjustable dazzle.
The lights offer 9 RGB colors, allowing for adjustable dazzle and a full-color lighting experience.

Maintenance

  • Cleaning: Wipe the light unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Storage: If storing for an extended period, ensure the battery is partially charged (around 50%) and store in a cool, dry place.
  • Avoid Disassembly: Do not attempt to disassemble, repair, or modify the product yourself. This can void the warranty and pose safety risks.

Troubleshooting

  • Light does not turn on: Ensure the battery is fully charged. If it's the first use, a full charge is required to deactivate circuit protection.
  • Light is dim or battery life is short: Ensure the light has been fully charged using a compatible 5V/1A adapter.
  • Light falls off after installation: For non-ironwork surfaces, ensure the adhesive metal plate was pressed firmly for at least 3 seconds during installation to create a strong bond. Clean the surface thoroughly before applying the plate.
  • Remote control not working: Check if the insulating paper has been removed from the battery compartment. Ensure you are within the 5-meter control range and there are no significant obstacles between the remote and the light.

User Tips

  • For optimal brightness and extended use, always ensure the light is fully charged before deployment.
  • When installing on non-iron surfaces, firmly press the adhesive metal plate for at least 3 seconds to ensure a secure attachment and prevent accidental detachment.

Warranty and Support

This product is covered by a manufacturer's warranty against defects in materials and workmanship. For detailed warranty information, service, or technical support, please refer to the official user manual PDF or contact your retailer. Do not attempt to repair the product yourself, as this may void the warranty.

A comprehensive user manual is available in PDF format for further reference. You can typically find this document on the seller's product page or by contacting customer support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.