CILIA SQ-GBK-01/02

Contents

CILIA 2-Way EU Socket Adapter with Overload Protection Switch

Model: SQ-GBK-01/02 | Brand: CILIA

Introduction

The CILIA SQ-GBK-01/02 is a versatile 2-way EU socket adapter designed to expand your power options. It allows you to power two devices simultaneously from a single wall outlet, enhancing convenience and comfort. Equipped with an integrated overload protection switch, this adapter ensures safe operation for your connected devices.

CILIA 2-in-1 EU socket adapter with overload protection switch
Front view of the 2-in-1 adapter with overload protection switch, plugged into a wall socket, next to a laptop.
Adapter powering two devices simultaneously
The adapter can supply power to two devices simultaneously, suitable for various electronics and appliances.

Safety Precautions

Please read and follow these safety instructions carefully to prevent accidents and ensure proper operation of your adapter:

  • Voltage and Load Compatibility: Before using the adapter, ensure that the input voltage matches your local power supply (250V AC) and that the total power consumption of connected devices does not exceed the maximum load limit (3500W).
  • Overload Protection: Do not exceed the maximum load limit of the adapter to avoid overheating, potential damage to the adapter, and connected devices.
  • Environmental Conditions: Keep the adapter away from water sources and damp environments to prevent electrical hazards and short circuits.
  • Child Safety: Place the adapter out of reach of children to prevent accidental use or misuse.
  • Proper Insertion: Ensure that plugs are fully and securely inserted into the adapter's sockets.
  • Device Compatibility: Always check the power rating of any electrical device before connecting it to the adapter to ensure it does not exceed the adapter's maximum load capacity.

Setup

  1. Insert into Wall Socket: Carefully insert the CILIA 2-Way Adapter's plug into a standard EU wall power socket. Ensure it is firmly seated.
  2. Connect Devices: The adapter features two EU sockets. Align the plugs of your electrical devices with the adapter's sockets and insert them securely.
Rear view of the EU socket adapter
Rear view of the adapter, showing the EU plug for wall insertion.

Operating Instructions

  1. Power On/Off: The adapter is equipped with a red overload protection switch. To supply power to the connected devices, press the switch to the 'ON' position.
  2. LED Indicator: A built-in LED indicator will illuminate when the power is on, signifying that the adapter is active and supplying power. The LED will turn off when the switch is in the 'OFF' position.
  3. Overload Protection: In case of an electrical overload, the integrated switch is designed to trip, cutting off power to protect your devices and the adapter. If this occurs, disconnect some devices and reset the switch.
  4. Disconnection: After use, switch the adapter to the 'OFF' position, then unplug your electrical devices from the sockets, and finally, remove the adapter from the wall socket.
Front view of the adapter with power switch
Front view of the adapter, clearly showing the two EU sockets and the red power switch.
Angled front view of the adapter
Angled front view of the adapter, highlighting the two sockets and the power switch.

Maintenance

  • Cleaning: Disconnect the adapter from the power source before cleaning. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive chemicals.
  • Storage: Store the adapter in a cool, dry place away from direct sunlight and moisture when not in use.
  • Inspection: Periodically inspect the adapter for any signs of damage, such as frayed wires, cracked casing, or loose connections. Discontinue use if any damage is found.

Troubleshooting

  • No Power:
    • Ensure the adapter is fully plugged into a live wall socket.
    • Check that the power switch on the adapter is in the 'ON' position.
    • Verify that the wall socket itself is functioning by testing it with another device.
    • If the overload protection switch has tripped (it might be in a middle position or 'OFF'), reduce the load by unplugging some devices and then reset the switch.
  • Devices Not Charging/Working:
    • Ensure the devices are properly plugged into the adapter's sockets.
    • Check if the devices themselves are working correctly by plugging them directly into a wall socket.
    • Confirm that the total power consumption of all connected devices does not exceed the adapter's 3500W limit.

Specifications

Feature Specification
Model NumberSQ-GBK-01/02
Input Voltage250V AC
Input CurrentMax 16 Amps
Input PowerMax 3500 Watts
MaterialPlastic
Installation TypeWall Mounted
Number of Slots2
GroundingStandard Grounding
CertificationRoHs, CE, RoHS
Backlight/IndicationNot (No)
Socket TypeSocket 220V (EU Standard)
ShapeRectangular
Extension Cable LengthNone
Is Smart DeviceNo
ApplicationResidential / General-Purpose
Dimensions (W x D x H)9cm x 7.7cm x 6.8cm (approx. 3.54in x 3.03in x 2.68in)
Dimensions of the CILIA EU socket adapter
Approximate dimensions of the adapter.

User Tips

  • Check Compatibility: Always ensure your devices' plugs are compatible with EU sockets and that their power requirements are within the adapter's limits.
  • Secure Connection: For optimal performance and safety, ensure all plugs are inserted firmly and completely into the adapter's sockets.
  • Regular Inspection: Periodically check the adapter for any signs of wear or damage, especially if used frequently or in high-traffic areas.

Warranty and Support

For detailed warranty information and customer support, please refer to the seller's policies or contact the point of purchase. A comprehensive user manual in PDF format is also available for download:

Download User Manual (PDF)

© CILIA. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.