1. Safety Precautions
Read and observe the following warnings and information below.
- Before cleaning, always unplug your monitor. It is recommended that you use dry cloth or lightly damp cloth to clean your monitor. Dry cloth is, however, the safest. If using damp cloth, wait for your monitor to completely dry before plugging it in again.
- Do not use alcohol or ammonia-based cleaner and/or liquids to clean your monitor.
- This monitor features ventilation openings on the back of the unit. Avoid blocking these openings to prevent the monitor from overheating.
- Avoid placing this monitor near any heat sources, e.g., portable heaters or heating vents, as this may cause damage to your monitor.
- Do not spray cleaner and or any kind of liquid directly onto the monitor's screen or any part of the monitor.
- Do not insert anything into any part of the monitor especially the ventilation openings.
- Always make sure your monitor is placed on a secure, level surface to prevent it from falling and sustaining damage.
- Unplug your monitor during any extended periods of non-use.
- Do not place heavy items on the monitor or monitor cables.
- Do not attempt to disassemble or remove parts from the monitor. Any disassembly or modification not performed by an authorized technician can result in damage to the monitor and/or possible exposure to high voltage electricity which may lead to serious injury or death.
FYHXele shall not be held responsible for injury or damage of products or persons due to failure to adhere to the aforementioned precautions or any others noted hereafter.
Image Persistence
This product is not designed to have a fixed image patterns on the screen for extended periods of time.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
⚠This "bolt of lighting" indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering.
❗The "exclamation point" calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
WARNING: To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus.
2. Box Contents
Please check the box for the following items:
- Monitor x 1
- Stand Stem and Stand Base x 1
- M6*16mm Screws x 1 (for Stand Installation)
- Power Cable x 1
- DP Cable x 1
- User Manual x 1
Figure 2.1: Contents of the FYHXele monitor package, including the display, stand parts, power adapter, and cables.
Note: Extra screws may be included as backup.
3. Product Overview
3.1 Monitor Buttons
| NO. | Description |
|---|---|
| 1 (M) | Display the OSD menu or enter sub-menus. |
| 2 (▼) | Press to move down in the menus. |
| 3 (▲) | Press to move up in the menus. |
| 4 (E) | Press to exit. |
| 5 (⏻) | Power on/off. |
3.2 Monitor Ports
- DP (DisplayPort): DisplayPort 1.4, supports up to 1920*1080P@180Hz (Max).
- HDMI: HDMI 2.1, supports up to 1920*1080P@180Hz (Max).
- AUDIO OUT: Insert one end of the audio cable into an external audio source, e.g., speakers or headphones, to pass audio signals through the monitor.
- USB Type-A Port: USB2.0, connect your USB devices.
- DC: Insert the power cable to supply power to the monitor.
WARNING: Always use the appropriate power cord.
Figure 3.1: Rear view of the monitor showing dimensions (540mm width, 320mm height, 418mm total height with stand, 8mm thickness) and port locations (HDTV2.1*1, DP1.4*1, AUDIO OUT*1, DC*1, VESA 75*75mm).
3.3 Indicator Light
A solid blue light indicates power is on and the monitor is operating normally. A flashing blue light indicates no video source, no horizontal or vertical signal has been detected, or voltage is low. Please ensure your computer is on and all video cables are fully inserted and/or connected. (Note: This feature is only for certain models).
4. Installation
- Open the package and take out the product with foam still attached. Gently place it on a desktop or table.
- Take out the base, insert the base into the stand stem, and lock it with one M6*16mm screw.
- Use a little force to insert the stand assembly into the slot on the back of the monitor in parallel until you hear a "click" sound.
- Hold the stand riser with both hands firmly and lift the monitor. Then place the monitor in an upright position on a flat surface.
5. OSD Setup
The On-Screen Display (OSD) Menu may be used to adjust your monitor's settings and appears on screen after turning on the monitor and pressing the M button.
When using the monitor for the first time, settings will automatically adjust to optimal settings according to your computer's configuration and parts etc.
- Press any one of the buttons (M, ▼, ▲, E, ⏻) to activate the navigation window.
- Press M to enter the OSD menu.
- Press ▼ or ▲ to browse functions. Highlight the desired function, then press M to enter the sub-menu.
- Press ▼ or ▲ to browse sub-menus, then press M to highlight the desired function.
- Press ▼ or ▲ to highlight an option, then press M to confirm the settings and exit the current screen.
- Press E to exit the current screen.
5.2 OSD Menu Functions
| Main Menu | Sub-Menu | Options | Description |
|---|---|---|---|
| Luminance | Brightness | 0-100 | Adjust display brightness |
| Contrast | 0-100 | Adjust display contrast | |
| ECO Mode | Standard, Game, Internet, Movie | Set visual mode | |
| DCR | ON/OFF | Turn dynamic contrast on/off | |
| Over Driver | ON/OFF | Set the Over driver function | |
| Image Setup | Aspect | Wide, 4:3 | Set image aspect ratio to fullscreen or 4:3 |
| HDR | ON/OFF | Turn on/off HDR function | |
| Color Setup | Color Temp. | Warm, Cool, User, Normal | Set display color temperature mode (5500K, 7500K, 6500K, User-defined) |
| RED | 0-100 | Customize the display screen RGB component according to preference | |
| BLUE | 0-100 | ||
| GREEN | 0-100 | ||
| OSD Setup | Low Blue Mode | Off, Weak, Medium, Strong | Set blue light filtering level |
| Language | English, Nederlands, Français, Deutsch, 한국, Español, Pусский, Português, Italiano, Polski, etc. | Set OSD language | |
| OSD H. Position | 0-100 | Adjust the OSD Horizontal position | |
| OSD V. Position | 0-100 | Adjust the OSD Vertical position | |
| Timeout | 0-60 | Adjust OSD display time | |
| Reset | Transparency | 0-100 | Adjust OSD transparency |
| Reset | None | Reset monitor configurations | |
| Extra | Black Level | 0-100 | Adjust the black level value from 0 to 100. |
| Input Set | HDMI, DP | DP or HDMI signals input | |
| Mute | ON/OFF | Turn audio on/off | |
| Volume | 0-100 | Adjust the volume | |
| FreeSync | ON/OFF | Turn on/off FreeSync | |
| Mprt | ON/OFF | Turn MPRT On or Off | |
Note: The functions of the OSD are subject to change due to version upgrades without prior notice.
6. Specifications
| Item | Detail |
|---|---|
| Model Number | FY24FHR |
| Screen Size | 23.8" |
| Viewing Angle | 178° (H) / 178° (V) |
| Aspect Ratio | 16:9 |
| Resolution | 1920x1080P (FHD) |
| Refresh Rate | 180Hz (Max) |
| LED Indicator | Power on: Blue (solid); Power saving: Red |
| Brightness | Typical: 250 cd/m²; Max: 300 cd/m² |
| Default Color Temperature | 6500K |
| Color Gamut | 99% sRGB |
| Pixel Pitch | 0.2745 (H) x 0.2745 (V) mm [92PPI] |
| Response Time | 2ms (OD) |
| Display Colors | 16.7M colors (8 bits) |
| Ports | DP x 1, HDMI x 1, USBx1, Audio output x 1 |
| Power | AC100-240V 50/60Hz |
| Adapter | DC12V, 4.0A |
| Power Consumption | Typical: 20W; Max: 26W; Standby ≤ 0.5W |
| OSD Language | English, 简体中文, Nederlands, Français, Deutsch, 한국, Español, Pусский, Português, Turkce, Italiano, Polski, 日本語 |
| Usage Temp. | 32°F~104°F (Operating), -4°F~140°F (Storage), 10-85% RH (Non-Condensing) |
| Tilt Angle | Forward 5°; Backward 15° (±2°) |
| VESA Mounting | 75 x 75 mm |
| Dimensions (with stand) | 21.2 x 12.6 x 16.5 in (540 x 320 x 418mm) |
| Weight (with stand) | 3.4kg. / 7.5 lb. (with packaging) |
7. Troubleshooting
The screen is blank
- Press power button to turn the monitor on.
- Confirm the brightness and contrast settings are set normally.
- Check if the Indicator Light is flashing. If so, there is no signal from your video source.
- If your source is a notebook or laptop, be sure that its settings are in mirror or extension mode and the device itself is powered on.
The image is out of focus
- Ensure the video cable is inserted properly at both ends.
The screen is flashing
- Try an alternative power source. Insufficient power may cause this issue.
- Ensure devices such as non-shielded speakers, fluorescent lighting, AC transformers, table fans, etc., are a safe distance away from your screen to avoid magnetic disturbances.
The color bleeds or visual effects appear unusual.
- If your screen is all red or blue, or any colors disappear, check to see that the cable is properly inserted. A loose connection can cause a bad signal.
- Try connecting to another video source for comparison.
The screen appears to be scrolling, rolling, or moving unusually.
- Check that your source frequency is within 48-170Hz.
- Reconnect and ensure your video cable is secure.
The monitor needs cleaning
- Make sure the monitor has been powered off before cleaning.
- Always use soft, non-abrasive cloth when cleaning.
- Use dry, non-abrasive cloth to gently remove debris or dust.
- If necessary, lightly dampen a non-abrasive cloth with water and gently clean the surface.
- Never use alcohol or ammonia-based cleaning solutions.
- Never spray liquid directly onto any part of the monitor.
The indicator light does not work
- Check if the power is on.
- Check if the power line connected with power.
Cannot plug and play.
- Inspect if the monitor is compatible with PC.
- Inspect if the graphics card is compatible with the monitor.
- Inspect if the pins in the interface are curved.
Dim image
- Adjust the brightness and contrast ratio.
Light indicator is on or flashing, but there is no image displayed on screen
- Check if the monitor power is on.
- Check if the graphics card is installed properly.
- Check if the signal line connects securely with the monitor.
- Check if the pins in the interface are curved.
Color shortage (red, green, or blue)
- Inspect if the pins in the interface are curved.
8. User Tips
- Smooth Experience: Utilize the 180Hz refresh rate for noticeably smoother cursor movement and an enhanced gaming experience.
- Vibrant Display: Adjust brightness and color settings to fully appreciate the vibrant display quality of the IPS panel.
- Audio Convenience: The monitor includes built-in speakers for basic audio output, which can be convenient for general use.
- Space-Saving Design: The monitor features a thin profile, which can help in creating a sleek and less cluttered setup.
9. Support and Contact Information
For more information, please contact us via email: support@fyhxele.com
Manufacturer: Shenzhen Fengyu Huaxin Technology Co., Ltd.
Address: Room 517, 5th Floor, Building D, Shanhaiyunhui, No. 1067, Bantian Xuegang, Longgang District, Shenzhen, Guangdong Province
Website: www.fyhxele.com
A complete user manual in PDF format is available for download: Download User Manual (PDF)