Liislee E300

Contents

Liislee E300 Head Up Display User Manual

For Renault Espace 4 (2003-2014)

1. Introduction

Thank you for purchasing the Liislee E300 Head Up Display (HUD). This HUD is designed to project essential vehicle computer information onto your windshield, enhancing driving safety by reducing the need to look down at the instrument cluster. This is particularly beneficial at high speeds and during night driving, helping both novice and experienced drivers monitor speed and potentially avoid infringements.

The E300 HUD incorporates advanced technology in both hardware and software, featuring a unique and elegant design. To ensure proper setup and functionality, please follow the instructions in this manual carefully. Should you encounter any issues, please contact your reseller for support.

2. Package Contents

Please check the box for the following items:

  • Liislee E300 HUD Unit
  • OBDII Connection Cable
  • Non-slip Mat
  • Reflective Film
  • User Manual
Liislee E300 HUD package contents
Figure 2.1: Package Contents. Includes the HUD unit, OBD cable, non-slip mat, user manual, and reflective film.

3. Product Overview and Features

3.1. Main Features

  • Plug and Play: Connects directly to any OBDII or EUOBD compatible vehicle.
  • Display: 5.5-inch screen with a 2D visual effect and multi-color design for enhanced readability and highlighting important details.
  • Nanotechnology: Utilizes nanotechnology to eliminate unwanted reflections, improving information clarity.
  • Comprehensive Data Display: Shows speed, engine rotational speed (RPM), water temperature, battery voltage, instantaneous fuel consumption, average fuel consumption, local time, single driving time, mileage measurement, shift reminder, fatigued driver reminder, low voltage alarm, high temperature alarm, speed alarm, engine fault alarm, and fault code elimination.
  • Unit Conversion: Ability to switch between Kilometers and Miles.
  • Automatic Operation: Powers on and off automatically with the vehicle.
  • Brightness Adjustment: Features both automatic and manual brightness adjustment modes.

3.2. Unit Functions and Display Information

The E300 HUD provides a clear and comprehensive display of your vehicle's data. Refer to the diagrams below for an understanding of each display element.

Liislee E300 HUD display elements diagram
Figure 3.1: HUD Display Elements. Numbered elements correspond to the descriptions below.
  1. Light Sensor: Automatically adjusts display brightness based on ambient light.
  2. Rotational Speed: Displays current engine RPM.
  3. Alarm Icon Panel (Left): From left to right: Shift reminder, overspeed alarm, engine fault, fatigued driver reminder, buzzer.
  4. Speed: Shows current vehicle speed.
  5. Rotational Speed Units: Indicates units for RPM.
  6. Unit Mark: Displays units for speed (KM/H or MPH) and RPM.
  7. Engine Temperature: Shows live engine temperature.
  8. Secondary Alarm Icon Panel (Right): From left to right: Engine temperature alarm, battery voltage alarm, overspeed alarm.
  9. Unit Mark: Displays units for temperature (°C or °F), distance (KM or M), and voltage (V).
  10. Multifunction Display Window: Shows voltage, mileage, or water temperature.
  11. Fuel Consumption Unit Mark: Displays L/100km (liters per 100 kilometers) or L/H (liters per hour).
  12. Fuel Consumption Display: Shows current fuel consumption.
  13. Fuel Consumption Logo.
Liislee E300 HUD display elements diagram with side view
Figure 3.2: HUD Unit Overview. Shows the OBDII cable input, power button, and three-way wave button for navigation.

4. Setup and Installation

4.1. Vehicle Compatibility Check

Ensure your Renault Espace 4 (2003-2014) is OBDII or EUOBD compatible. Most vehicles manufactured after 2006 in China are equipped with a Test Diagnostic Communication Link (TDCL).

  • Check the area under the steering wheel for an OBD plug.
  • Consult your vehicle manufacturer or search online for compatibility.
  • Open the bonnet and look for an OBDII compatible sticker (note: not all compatible cars have this sticker).
OBDII certified sticker and OBD port examples
Figure 4.1: OBDII Certification and Port Location. Example of an OBDII certified sticker and common OBD port locations.

4.2. HUD Installation Procedure

  1. Locate the 16-pin diagnostic link (OBD port) in your vehicle, typically under the steering wheel.
  2. Connect the OBD cable to the HUD unit's OBD interface.
  3. Route the OBD cable neatly, tucking it into the seam crossing of your dashboard.
  4. Plug the other end of the OBD cable into your vehicle's OBD interface.
  5. Start your vehicle's engine and ensure the power switch on the HUD is in the 'on' position.
3-step HUD installation diagram
Figure 4.2: Three-Step Plug and Play Installation. Connect HUD to cable, route cable, plug cable into vehicle OBD port.

Initial Power-On Check:

  • If the HUD displays vehicle voltage, fuel consumption, speed, and rotational speed, the unit is installed correctly.
  • If not, wait up to one minute for the software to sync and confirm the OBD cable is properly plugged in.

4.3. Reflective Film Installation

Using the HUD without the reflective film may result in a double image on your windshield due to its dual-layer construction. If you observe a double image, install the film as follows:

  1. Place the supplied non-slip mat on your dashboard in the desired position, with the HUD unit on top.
  2. Observe where the HUD reflects on the windshield and place the reflective film in that position.
  3. Ensure the windshield surface is clean and dry before applying the film.
  4. Remove the back protective side (marked '1') from the film and attach it to the clean windshield.
  5. Once satisfied with the placement, use a credit card or similar tool to smooth out any bubbles or air pockets.
  6. Remove the front protective side (marked '2'). If you need to adjust the HUD's reflection, reposition the unit using the non-slip mat.
HUD projection diagram
Figure 4.3: HUD Projection Diagram. Illustrates how the HUD projects information onto the windshield from the dashboard.

5. Operating Instructions

5.1. Setting Menu

Your vehicle's instrument cluster may display a slightly different speed than the actual computed speed. The HUD allows you to adjust this offset. To enter the setting menu:

  1. Hold the three-way wave button down for 5 seconds.
  2. Once in the setting mode, press the wave button inwards (OK) to advance through the screens. Use the up/down motion of the wave button to adjust parameters. The current screen number is shown in the top right corner.
  3. After making adjustments, hold the wave button down again for 5 seconds to exit the setting menu.

Wave Button Functions:

  • Press Inwards: OK / Select
  • Scroll Down: Decrease value / Next option
  • Scroll Up: Increase value / Previous option

Setting Parameters:

MenuParameterAdjustment RangeExplanationDefault
0Speed50-150Adjustment Range 50%-150%107
1Rotational Speed50-150Adjustment Range 50%-150%117
2Fuel Consumption50-150Adjustment Range 50%-150%100
3Rotational Speed Alarm10-75Adjustment Range 1000-7500 r.25
4Shift Reminder0-75Adjustment Range 1000-7500 r.25
5Single/Four Stage Alarm0-10 = manual mode; 1 = four-stage alarm (60, 80, 100, 120km/h)0
6Single Stage Alarm30-250Setting range is 30km/h-250km/h120
7Display Mode0-20 = automatic (show all under 80km/h, high-speed mode above 80km/h)0
8Brightness Adjustment0-20 = automatic; 1 = darkest; 2 = brightest0
9Fuel Consumption Unit0-20 = no display; 1 = L/H; 2 = L/100km2
10Speed Unit0-20 = RPM; 1 = KM; 2 = MPH1
11Water Temperature Unit0-20 = no display; 1 = °C; 2 = °F1
12Mileage Unit0-10 = KMH; 1 = MPH0
13Reference Fuel Consumption10-500Vehicle fuel consumption70
14Air Displacement Setting0-1000 = airflow meter; 1 = reference fuel consumption; 2-100 = vehicle emission (0.2L to 10L)20
15Start Reference Voltage110-150Auto power on/off voltage for HUD (no need to set)132
16Restore to Factory Settings0-1Set to 1, press OK for 5 seconds to reset0

5.2. Switching Display Information

Vertically press the 'OK' button to cycle through different display information: water temperature, battery voltage, mileage, and default power. After a successful scan, mileage will be displayed.

5.3. Alarm Buzzer Control

  • To turn off the alarm buzzer: Push the wave button down for 5 seconds.
  • To turn on the alarm buzzer: Push the wave button up for 5 seconds.

5.4. Clearing Fault Codes

When the HUD is connected to the car, do not start the engine. Turn your car to the 'on' position but do not start the engine. Ensure the HUD is off. Press the downside key for 5 seconds; you will hear a 'tick' sound, indicating the HUD has been reset to factory settings.

6. Maintenance

To ensure the longevity and optimal performance of your Liislee E300 HUD, follow these simple maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the HUD unit and the reflective film. Avoid abrasive cleaners or solvents that could damage the surfaces.
  • Temperature: Do not expose the unit to extreme temperatures (below -40°C or above +80°C) or direct sunlight for extended periods when not in use.
  • Handling: Handle the unit with care to avoid physical damage.
  • Cable: Ensure the OBD cable is not pinched or strained, as this can lead to connectivity issues.

7. Troubleshooting

If you encounter any issues with your HUD, refer to the table below for common problems and their solutions:

ProblemPossible ReasonSolution
No speed displaySetting value too high or function closedCancel alarm stages and open alarm switch
No rotating speed displaySetting value too high or function closedReset unit and open alarm switch
No display after startingSwitch not openedOpen switch and check plug
Inaccurate fuel consumptionNo air flow sensorReset emissions and calibrate
No speed or engine speed displayNot compatible with OBDII or EU-OBD portContact vehicle manufacturer
No mileage displayNo settings for fuel and fuel consumption calibrationSwitch to manual input for fuel and consumption
Speed is inaccurateUnit of speed is MPHSwitch unit of speed to KM/H
Display only shows speed and fuelSpeed exceeds 80KM/HEnter settings and switch display mode to 1

8. Specifications

Here are the technical parameters for the Liislee E300 HUD:

ParameterValue
Environment Temperature-40°C to +80°C
Barometric Press86-106KPa
Relative Humidity10%-95%
Environment Voice<=60dB
Alarm Sound Level>=30dB(A)
Work Voltage9V~16Vdc (12Vdc/400mA)
Product Size12.5 x 7.5 x 1.5 cm
Product Weight110g
E300 HUD technology parameters and dimensions
Figure 8.1: HUD Dimensions and Specifications. Visual representation of the HUD unit with its dimensions and a table of basic information.

9. User Tips

  • Optimal Placement: Experiment with the HUD unit's position on the dashboard to find the best viewing angle and minimize glare.
  • Brightness: Utilize the automatic brightness feature for seamless day and night driving. If needed, manually adjust the brightness for personal preference.
  • Clear View: Ensure the area of the windshield where the HUD projects is clean and free from obstructions for the clearest display.
  • Cable Management: Neatly tuck away the OBD cable to prevent it from interfering with driving or being damaged.

10. Warranty and Support

The Liislee E300 HUD comes with a standard manufacturer's warranty. For any warranty claims, technical support, or operational questions not covered in this manual, please contact your original reseller or point of purchase. They will be able to provide assistance and guide you through any necessary procedures.

For further information, you may also refer to the official user manual PDF available at: User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.