1. Product Introduction
The Pictrey M2 Dash Cam is a compact and advanced car camera designed to record your journeys with high clarity and provide enhanced safety features. This manual provides detailed instructions for its installation, operation, and maintenance.
1.1 Appearance
Familiarize yourself with the components of your Pictrey M2 Dash Cam:
Image: Pictrey M2 Dash Cam highlighting 2K resolution, NightVIS 2.0, and mini size.
Image: Diagram illustrating main features including 2K recording, mini body, NightVIS 2.0, supercapacitor, collision detection, 24/7 parking monitoring, 256GB MicroSD support, and Wi-Fi connectivity for data transfer.
The device features an indicator light, memory card slot, reset hole, Micro-USB port, microphone (MIC), lens, and speaker. It attaches via a 3M adhesive base.
1.2 Indicator Guide
The indicator light provides visual feedback on the Dash Cam's status:
| Indicator | System Status |
|---|---|
| Flashes Blue Slowly | Recording |
| Flashes Red Slowly | Parking Monitoring |
| Solid Red | Upgrading/Malfunction |
| Flashes Red Quickly | Abnormal Storage |
1.3 Specifications
Key technical specifications of the Pictrey M2 Dash Cam:
| Feature | Specification |
|---|---|
| Model | M2 |
| Input | 5V=2A |
| Storage | Supports Micro-SD card up to 256GB, U3 (UHS-3) or above, Class 10 required. |
| Resolution | 2K (2560x1440) |
| Aperture | F2.0 |
| Field of View (FOV) | 121° |
| Wi-Fi | 2.4GHz |
| Power Interface | Micro USB |
| Working Temperature | -4°F to 158°F (-20°C to 70°C) |
| Storage Temperature | -40°F to 185°F (-40°C to 85°C) |
| Chipset Manufacturer | HISILICON |
| Frames Per Second | 30 |
| Loop-Cycle Recording | Yes |
| Built-in Screen | No |
| Rear Camera | None |
| Number Of Lenses | 1 |
| Is Batteries Included | No (uses supercapacitor) |
| Original Package | Yes |
| Certification | CE |
2. Setup Instructions
This section guides you through the initial setup of your Pictrey M2 Dash Cam.
2.1 Memory Card Installation
The Dash Cam requires a Micro-SD card for recording. Ensure the Dash Cam is not powered on before installation.
- Insert the memory card halfway into the slot, referring to the silkscreen pattern.
- Use a fingernail or paper clip to push the card inward until it clicks and locks in place.
To remove the memory card, gently push its edge inward until it clicks and pops out, then pull it out.
Image: Pictrey M2 Dash Cam and included accessories.
Note: Please use a branded Micro-SD card (up to 256GB). Format the card before first use to prevent errors. Do not remove the card while the Dash Cam is on.
2.2 Dash Cam Installation
The Dash Cam can be powered via the cigarette lighter. For a cleaner installation and parking monitoring, an intelligent hardwire kit (sold separately) is recommended, which should be installed by a professional.
Cigarette Lighter Power Supply:
- Wipe the front windshield: Ensure the area for mounting is clean and dry.
- Power on the Dash Cam: Connect the Dash Cam to the car charger using the included Type-C power cord. Plug the car charger into the cigarette lighter. The Dash Cam will automatically start when the car is powered on.
- Determine installation position and adjust lens angle:
- Connect to the DDPAI App (see section 2.3). In the app, go to "Device" > "Add a device" > "Enter Device" to view the preview interface with horizontal and vertical center lines.
- Place the Dash Cam in the middle of the front windshield, ensuring the lens faces outward. Adjust its position so the car's front center line aligns with the vertical center line in the app, and the ground plane's disappearing line aligns with the horizontal center line.
- Stabilize the Dash Cam:
- Attach the electrostatic sticker to the chosen installation position on the windshield.
- Peel off the film from the 3M adhesive on the bracket and stick the bracket to the center of the electrostatic sticker.
Note: Pay attention to the direction and position of the 3M sticker. Confirm the recording angle is correct before final attachment.
- Wiring: Route the power cord from the cigarette lighter receptacle to the Dash Cam, hiding it in the car's plastic guard plate using the pry tool.
Image: Illustration of power cable routing in a car.
Note: The cigarette lighter receptacle's position may vary by car model. The diagram is for reference only.
2.3 App Connection
The DDPAI App is essential for controlling and managing your Dash Cam. Software features and UI may vary due to updates.
Downloading the App:
Scan the QR code below or search for "DDPai" in the Google Play Store (Android) or Apple App Store (iOS) to download the DDPAI App.
Image: QR code for downloading the DDPAI App.
Wi-Fi Connection:
- Launch the DDPAI App, go to the "Device" page, tap "+ Add a device", then "Device without screen".
- Tap "Next" > "Connect to Wi-Fi". The app will display available Dash Cam Wi-Fi networks.
- For iPhone: Go to your phone's "Settings" > "WLAN", select "pictrey_M2_XXXX", enter the default password (1234567890), and tap "Join".
- For Android: In the Wi-Fi list, select "pictrey_M2_XXXX", enter the default password (1234567890), and tap "Connect".
3. Operating Instructions
3.1 Video Function
Preview Video:
After connecting to the Dash Cam via the app, enter the real-time preview interface. Tap the landscape preview icon or rotate your phone horizontally (with auto-rotate enabled) to switch to full-screen preview. The preview is in standard quality; HD quality requires downloading.
Playback Video:
- In the real-time preview interface, drag the progress bar to select the desired time.
- Tap the thumbnail or wait 5 seconds for the recorded video to play.
Color-coded timelines indicate video types:
| Color-coded timeline | Description |
|---|---|
| Video triggered by an emergency event (e.g., sudden braking or collision). | |
| Video recorded in parking monitoring mode. |
Download Video:
Method 1:
- Drag the progress bar to select the download start point.
- Tap the download icon to enter the downloading interface.
- Tap "Complete" to save the file to your local album.
Method 2:
- Tap the album icon on the "Device" interface.
- Hold the video/photo file to enter selection mode.
- Select desired files and tap "Download".
Note: Video lengths range from 5 seconds to 3 minutes.
3.2 Taking Photos
The Dash Cam supports three photography modes:
- Collision sensing photography: Automatically takes pictures upon detecting a collision or emergency braking.
- Manual photographing: Tap the camera icon in the preview interface.
- Voice photographing: Say "Take photo" to the Dash Cam's microphone.
Note: Collision sensing and voice photography generate associated videos (default 10 seconds) saved in the "Snap"/"Emergency" tab of the "Device Album".
Viewing Photos/Videos:
- Device Album: Connect to the Dash Cam via the DDPAI App, tap "Device Album" on the "Device" interface to view captured photos and videos. These are stored on the Dash Cam's memory card.
- Local Album: Downloaded photos/videos are moved to your phone's local album. Launch the app, tap the "Local Album" tab on the "Device" interface to view them without connecting to the Dash Cam.
You can enable "Automatically download snapshot files" / "Automatically download emergency files" in "Me" > "APP Settings" to automatically save these files to your local album.
3.3 Parking Monitoring
When using an intelligent hardwire kit (optional), the Dash Cam can monitor your vehicle while parked. After 15 minutes of being stationary, it enters parking mode and records abnormal collisions.
- Connect your phone to the Dash Cam via the app. Go to "Device Settings" > "Enter after the vehicle has stalled".
- Select your preferred parking monitoring mode.
Parking Mode: Time-lapse video recording
- After 15 minutes stationary, the Dash Cam switches to time-lapse recording. It enters sleep mode after a set duration. Collision wake-up is supported during sleep. If low voltage is detected, the device powers off and restarts only when the vehicle starts.
- If a collision occurs during time-lapse recording, it switches to normal recording and logs the event.
Parking Mode: Normal video recording
- After 15 minutes stationary, the Dash Cam continues normal recording. If a collision occurs, a snapshot is taken (file name starts with "G" and ends with "L"). After the preset duration, it enters sleep mode. If low voltage is detected, the device powers off and restarts only when the vehicle starts.
Parking Mode: Sleep
- After 15 minutes stationary, the device enters sleep mode. In case of a collision, it switches to normal recording. If the vehicle remains stationary for another 15 minutes, it re-enters sleep mode. If low voltage is detected, the device powers off and restarts only when the vehicle starts.
Note: Parking monitoring requires the intelligent hardwire kit (optional).
3.4 Collision Detection & Locked Videos
When the Dash Cam detects a collision (e.g., sudden braking), it generates an emergency photo and an emergency-related video, which are stored separately and not overwritten by loop recording.
Setting Camera Sensitivity:
The Dash Cam's collision sensitivity can be adjusted to trigger recording more or less easily. The default is "Medium", with options including "High", "Medium-high", "Medium", "Medium-low", "Low", "Off", and "Custom".
- Connect your phone to the Dash Cam via the app. Go to "Device Settings" > "Adjust collision sensitivity".
- Select "Driving" / "Parking" and set the appropriate sensitivity.
Set the Duration of Related Videos during Shooting:
The default related video duration is "10s", with options for "10s", "20s", and "30s".
- Connect your phone to the Dash Cam via the app. Go to "Device Settings" > "Duration of related videos during shooting".
- Set the duration as needed:
- 10s: 5 seconds before and after the collision.
- 20s: 10 seconds before and after the collision.
- 30s: 15 seconds before and after the collision.
- Off: Still generates a 5-second emergency video (before and after).
3.5 Fatigue Driving Voice Alert
The Dash Cam can provide voice alerts for fatigue driving.
- Connect your phone to the Dash Cam via the app.
- Go to "Device Settings" and enable/disable the "ADAS Driver Assistance" switch.
When enabled, voice prompts will remind you to rest or stay alert during long drives.
3.6 Data Transmission
To access recorded files directly:
- Gently remove the memory card from the Dash Cam.
- Insert the card into a card reader and connect it to a computer.
- Open the "DCIM" folder to browse or edit photos and video files.
File types:
- 200 Video: Includes regular recordings and time-lapse recordings (parking mode). Time-lapse files are prefixed with "S."
- 201 Photo: Includes voice-triggered photos (prefixed with "N") and collision-triggered photos (prefixed with "G").
4. Maintenance
4.1 Firmware Upgrade
To ensure optimal performance, keep your Dash Cam's firmware updated:
- Open the DDPAI App and connect to the Dash Cam's Wi-Fi.
- Go to "Me" > "About DDPAI" > "Check version".
- The app will automatically check for the latest App and firmware versions. Follow on-screen instructions to upgrade if a new version is available.
Note: Do not cut off power during an upgrade to avoid damaging the device. If a power outage occurs, contact customer service or manually copy the upgrade package to the DCIM folder.
4.2 Safety Precautions
Please read and follow these precautions for safe and correct use:
- Do not operate the Dash Cam or watch videos on your phone while driving. Prioritize driving safety.
- Do not install the Dash Cam in a location that obstructs your driving view.
- Use only the power cord included in the product package. Other cords may cause fire, short circuits, or electric shock.
- Use a branded Micro-SD card (up to 256GB). Do not insert or remove the memory card while the device is in use. Format it via the app before use and regularly to maintain performance.
- Do not open the Dash Cam shell or attempt repairs yourself. Contact official customer service for product malfunctions.
- The Dash Cam can be used in vehicles or other locations with a suitable adapter.
- If using a power adapter, ensure it meets standard requirements.
- All images in this guide are for reference; refer to the actual product.
5. Troubleshooting (FAQ)
5.1 How do I format a memory card?
Method 1 (via App): Connect your phone to the Dash Cam via the app, go to "Camera Settings" > "Storage Management", and select "Format memory card".
Method 2 (via Computer): Remove the memory card, insert it into a card reader, connect to a computer, find the card drive, right-click, and select "Format".
5.2 How do I export driving video from the memory card?
Use a card reader to connect the memory card to a computer, then you can export the driving video files.
5.3 What is the Wi-Fi password of the Dash Cam?
The default Wi-Fi password is "1234567890". You can change it in the app under "Camera Settings" > "Set WIFI Password" after connecting.
5.4 Can I change the Wi-Fi password of the Dash Cam?
Yes. Connect to the Dash Cam via the app, go to "Device Settings" > "Device Wi-Fi Password", enter a new password, confirm, and save.
5.5 How do I reset the Dash Cam?
If the device malfunctions, insert an eject pin into the RESET hole and hold for 6 seconds. It will power on automatically after resetting.
5.6 What if I forget the Wi-Fi password?
Press the function button for approximately 6 seconds to reset the device. This will revert the Wi-Fi password to the default (1234567890).
5.7 Can I turn off the voice control function if it's often triggered by mistake?
Yes. Connect to the Dash Cam via the app, go to the "Device" page, tap "Device Settings", and disable the "Local Voice Control" function.
5.8 Why does the product feel very hot during use?
It is normal for electronic products to heat up during use. All Pictrey products undergo high-temperature testing. The heat is due to the machine's heat dissipation and will not affect normal operation or cause safety issues.
6. Warranty and Support
The Pictrey M2 Dash Cam comes with a 1-year warranty. For detailed warranty information, technical support, or service inquiries, please refer to the official Pictrey website or contact their customer service.
A comprehensive user manual in PDF format is available for download: Pictrey M2 User Manual (PDF).