FGHGF B29C-ZK-360

Contents

B29C-ZK-360 Bluetooth Audio Receiver Transmitter User Manual

3-in-1 Wireless Music Adapter (Receiver, Transmitter, Sound Card)

1. Introduction

The B29C-ZK-360 is a versatile 3-in-1 Bluetooth audio adapter that functions as both a transmitter and a receiver, and can also be used as a Bluetooth sound card. Equipped with the latest Bluetooth V5.0 chip, it offers stable connections and a wireless range of over 33 feet. This device is designed to enhance your audio experience by enabling wireless streaming from non-Bluetooth sources or allowing your home stereo to receive music wirelessly from your smart devices.

2. Package Contents

Please check the box for the following items:

  • 1 x Bluetooth Music Receiver Transmitter (B29C-ZK-360)
  • 1 x USB Charging Cable
  • 1 x 3.5mm Audio Cable

Note: Other products shown in promotional images are not included.

3. Safety & Warnings

Warning!

  • This product is only for adult use.
  • Keep out of reach of children and pets to avoid accidental injury or ingestion.
  • Always check if the installation is correct before use.
  • If you notice abnormal noise or equipment error after installation, stop using the device immediately.
  • Follow all instructions for proper use; misuse may cause harm.
  • Store the product in a dry and shady place, away from high temperatures, humidity, and direct sunlight.

4. Product Overview

Familiarize yourself with the device's components:

Front view of the Bluetooth adapter with control buttons and TX/RX switch.
Figure 1: Front view of the B29C-ZK-360 Bluetooth Adapter showing control buttons (+, Power, -) and TX/RX switch.
Angled view of the Bluetooth adapter, highlighting ports and TX/RX switch.
Figure 2: Angled view of the B29C-ZK-360 Bluetooth Adapter, showing the Micro-USB charging port, 3.5mm audio jacks, and TX/RX mode switch.

Controls and Indicators:

  • Power Button: Press and hold to turn on/off. Short press for play/pause (Receiver Mode/Mono only).
  • '+' Button: Increase volume. Long press to skip to next track (Receiver Mode/Mono only).
  • '-' Button: Decrease volume. Long press to skip to previous track (Receiver Mode/Mono only).
  • TX/RX Switch: Slide to switch between Transmitter (TX) and Receiver (RX) modes.
  • Micro-USB Port: For charging the device.
  • 3.5mm Audio Jacks: For audio input/output connections.

5. Setup and Connection

5.1. Initial Charging

Before first use, ensure the device is fully charged. Connect the supplied USB charging cable to the Micro-USB port on the adapter and the other end to a DC 5V power source (e.g., USB wall adapter, computer USB port). A full charge takes approximately 1 hour and provides about 10 hours of operating time.

5.2. Mode Selection (TX/RX)

Slide the TX/RX switch on the side of the adapter to select the desired mode:

  • TX (Transmitter) Mode: To send audio wirelessly from a non-Bluetooth device to Bluetooth headphones or speakers.
  • RX (Receiver) Mode: To receive audio wirelessly from a Bluetooth device (phone, tablet) and output it to a non-Bluetooth audio system (e.g., wired speakers, car stereo).
Diagram showing Transmitter-Receiver 2-in-1 functionality.
Figure 3: The 2-in-1 Transmitter-Receiver functionality.

5.3. Using as a Bluetooth Transmitter (TX Mode)

  1. Switch the adapter to TX mode.
  2. Connect the 3.5mm audio cable from the adapter's audio jack to the audio output port of your non-Bluetooth device (e.g., TV, PC, MP3 player).
  3. Turn on the adapter by pressing and holding the power button. It will automatically enter pairing mode.
  4. Place your Bluetooth headphones or speaker in pairing mode.
  5. The adapter will automatically search for and connect to nearby Bluetooth audio devices. Once connected, audio from your non-Bluetooth source will stream to your Bluetooth device.

5.4. Using as a Bluetooth Receiver (RX Mode)

  1. Switch the adapter to RX mode.
  2. Connect the 3.5mm audio cable from the adapter's audio jack to the audio input port of your non-Bluetooth audio system (e.g., wired speakers, home audio system, car audio).
  3. Turn on the adapter by pressing and holding the power button. It will automatically enter pairing mode.
  4. On your Bluetooth-enabled device (e.g., smartphone, tablet), search for Bluetooth devices and select "ZK-360" (or similar name) to pair.
  5. Once paired, audio from your Bluetooth device will play through your connected audio system.
Diagram illustrating Bluetooth Receiver mode connections.
Figure 4: Bluetooth Receiver mode setup for various audio devices.

6. Operation

The multi-functional buttons on the adapter allow for convenient control, primarily in Receiver Mode (Mono only):

  • Play/Pause: Short press the Power button.
  • Next Track: Long press the '+' button.
  • Previous Track: Long press the '-' button.
  • Volume Up: Short press the '+' button.
  • Volume Down: Short press the '-' button.

Note: These controls are most effective and primarily applicable when the device is in Receiver Mode and connected to a mono audio source.

7. Specifications

Feature Detail
Product Name ZK-360 Bluetooth Audio Receiver Transmitter
Model B29C-ZK-360
Bluetooth Version Bluetooth 5.0 + EDR
Wireless Type NFC (implied by product properties, though not explicitly stated as a feature in description)
Interface 3.5mm Audio Jack, Micro-USB (for charging)
Wireless Distance Up to 10 meters (33 feet) without obstacles
Power Supply Built-in 300mAh polymer battery
Operating Time Approx. 10 hours (after 1 hour full charge)
Charging Voltage DC 5V
Material Plastic
Color Black
Compatibility Android, iOS cell phones/PAD, all Bluetooth audio devices, audio devices with 3.5mm audio input/output interface

8. Troubleshooting

  • No Power: Ensure the device is charged. Connect to a DC 5V power source using the Micro-USB cable.
  • Cannot Pair: Make sure the adapter is in the correct TX or RX mode. Ensure the receiving/transmitting device is in pairing mode and within 10 meters (33 feet) of the adapter. Turn both devices off and on again, then try pairing.
  • Poor Sound Quality (Crackling/Hissing): Ensure the adapter and connected devices are within range and there are no major obstructions. Check that all audio cables are securely connected.
  • No Audio Output/Input: Verify that the 3.5mm audio cables are correctly connected to the input/output jacks of both the adapter and your audio device. Check volume levels on all connected devices.
  • Controls Not Responding: Remember that multi-functional button controls (play/pause, skip track, volume) are primarily applied for Receiver Mode/Mono only.

9. User Tips

  • For optimal performance, keep the adapter and connected Bluetooth devices within line of sight and minimize physical obstructions.
  • Always fully charge the device before extended use to maximize battery life.
  • When switching between TX and RX modes, it's often best to power off the device first, switch the mode, and then power it back on to ensure proper initialization.

10. Maintenance

  • Before first use, ensure the product is free from any damage.
  • After use, store the product in a dry place and keep away from children.
  • Clean the device with a soft, dry cloth. Do not use liquid cleaners or aerosols.

11. Warranty & Support

For support or warranty inquiries, please contact the manufacturer or authorized representative:

  • Manufacturer: Taiyuan aopusite electronic commerce co., ltd, Room 1302, 13th floor, Unit 3, Building 6, Hengda Yayuan Community, Wanbailin District, Taiyuan City, Shanxi Province Code: 030000
  • EU Authorized Representative: Outong GmbH, Brehmstr, 56, 40239 Duesseldorf

For further assistance, you may also refer to the official user manual PDF: View User Manual (PDF)

© 2024 FGHGF. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.