1. Product Introduction
The Pictrey A400 is a high-performance 4K Dash Cam designed to capture clear and detailed footage of your journeys. It features advanced technologies like NightVIS 2.0 for superior night vision and ADAS for driving assistance.
1.1 Key Features

Image: Overview of the Pictrey A400 Dash Cam's main features, including 4K Clear Recording, ADAS Driving Assistance, Wi-Fi & Bluetooth Connect, Large Capacity Expansion, Collision Detection, Supercapacitor, Multi-language Options, 1.9" IPS Display, NightVIS 2.0, and 24/7 Parking Monitoring.
- 4K Clear Recording: Experience stunning video quality with 4K resolution at 3840 x 2160.
- NightVIS 2.0: Equipped with Pictrey's NightVIS 2.0 technology, the A400 delivers superior night vision with brighter, clearer images in low-light conditions.
- ADAS Driving Assistance: Advanced Driver Assistance System for enhanced safety.
- Wi-Fi & Bluetooth Connectivity: Connect to the DDPAI App for real-time preview, playback, download, editing, and sharing.
- Supercapacitor: Provides enhanced safety and reliability, especially under extreme temperatures, with no risk of ignition, better thermal resistance, and a long cycle life.
- 1.9" IPS Display: Built-in screen for easy viewing and navigation.
- 24/7 Parking Monitoring: Requires an intelligent hardwire kit for continuous surveillance.
1.2 Device Appearance and Components
Familiarize yourself with the physical components of your Pictrey A400 Dash Cam.

Image: Front view of the Pictrey A400 Dash Cam, highlighting its compact design and lens.
| No. | Component |
|---|---|
| 1 | Lens |
| 2 | 3M Adhesive Base |
| 3 | Display (Non-touchscreen) |
| 4 | Function Buttons |
| 5 | MIC |
| 6 | USB Type-C Port |
| 7 | Speaker |
| 8 | Micro-SD Card Slot |
1.3 Function Buttons
The Dash Cam features several buttons for easy operation:
- Return: Navigates back to the previous screen or menu.
- Settings: Accesses the device settings menu.
- Recording On/Off: Starts or stops video recording.
- Screen On/Off (or enter the screen saver): Toggles the display on or off.
- Reset: Hold the confirm button for 6 seconds to reset the device.
2. Setup and Installation
This section guides you through the physical installation of your Dash Cam and initial setup.
2.1 Memory Card Installation
- Install the Memory Card: Ensure the Dash Cam is not powered on. Insert the memory card halfway into the slot (refer to the silkscreen pattern). Use a fingernail or paper clip to push the card until it clicks and locks in place.
- Remove the Memory Card: Gently push the card's edge inward until it clicks and pops out, then pull it from the slot.
Note: Please use a branded Micro-SD card with a capacity of up to 256GB. Format the memory card before first use to prevent errors. Do not remove the memory card while the Dash Cam is turned on.
2.2 Dash Cam Installation
The Dash Cam can be powered via a cigarette lighter or an OBD interface. The following steps detail the general installation process.
Video: A demonstration of the Pictrey A400 Dash Cam's unboxing, installation, and sample footage.
- Wipe the Front Windshield: Clean the area where the Dash Cam will be mounted to ensure the bracket adheres firmly.
- Power on the Dash Cam: Insert the car charger into the cigarette lighter, then connect the Dash Cam using the included Type-C power cord. The Dash Cam will automatically start recording when the car is powered on.
- Determine Installation Position and Adjust Lens Angle:
a. Connect the Dash Cam to your mobile phone via the DDPAI App (see Section 3).
b. In the DDPAI App, navigate to "Device Settings" > "ADAS intelligent assistance reminder" > "Adjust ADAS installation position".
c. Select "Go to live preview" > "Enter live preview" to access the calibration interface. Follow the on-screen instructions to adjust the Dash Cam's position for optimal recording angle. - Stabilize the Dash Cam: After determining the optimal position, attach the electrostatic sticker to the windshield. Peel off the film from the 3M sticker on the bracket and firmly attach the bracket to the center of the electrostatic sticker.
- Wiring: Route the power cord from the cigarette lighter receptacle to the Dash Cam, tucking the cord into the plastic guard plate of the car using a pry tool for a neat installation.

Image: The Pictrey A400 Dash Cam shown with its included accessories: Car Charger, Pry Tool, 3.5m Power Cable, 3M Adhesive, Static Stickers, and User Manual.
Note: Pay attention to the direction and position when attaching the 3M sticker. Confirm the recording angle is correct before final attachment. The cigarette lighter receptacle's position may vary by car model.
2.3 Alternative Power Connections (Optional)
For advanced parking monitoring features, an intelligent hardwire kit or OBD power cable is required.
- Connect to the Fuse Box (Intelligent Hardwire Kit): This method provides a clean installation and enables parking monitoring. Professional installation is recommended to avoid vehicle damage. The intelligent hardwire kit needs to be purchased separately.
- Connect to the OBD Interface (OBD Power Cable): This method is easier to operate and also enables parking monitoring. Plug the Type-C connector of the OBD power cable into the Dash Cam's Type-C port, then connect the other end to the vehicle's OBD port. The OBD power cable needs to be purchased separately.
3. Operating Instructions
This section covers connecting your Dash Cam to the mobile app and using its various functions.
3.1 App Connection
The Pictrey A400 Dash Cam is powered by DDPAI. Download the DDPAI App to manage your device.
- Downloading DDPAI App: Scan the QR code below or search for "DDPai" in the Google Play Store (Android) or App Store (iOS).

Image: QR code for downloading the DDPAI App.
- Bluetooth Connection:
a. Power on the Dash Cam. Follow the on-screen instructions to select language and set date/time.
b. Turn on Bluetooth on your mobile phone.
c. Launch the DDPAI App, tap "Device" > "+ Add a device".
d. Select the current device name (e.g., DDP1BXXXX) from the detected Bluetooth device list.
e. Press the confirm button on the far right of the device to authorize the connection.Note: The device can only connect to one phone at a time via Bluetooth. To connect a different phone, turn off Bluetooth on the currently connected phone, remove the device from the app, or reset the device.
- Wi-Fi Connection: After successfully connecting via Bluetooth, you need to connect to the camera via Wi-Fi to view the device album, adjust settings, or access the preview interface.
a. For iPhones: In the DDPAI App, tap "Go to connection" > "WLAN". In your phone's Wi-Fi settings, select "pictrey_A400_XXXX" and enter the default password (1234567890), then tap "Join".
b. For Android Phones: If Wi-Fi is enabled on the Dash Cam, the system will automatically connect. If not, launch the DDPAI app, tap "Device" > "+ Add a device" > "Device with screen". Then tap "Next" > "Connect to Wi-Fi" and select "pictrey_A400_XXXX" from your phone's Wi-Fi list, entering the default password (1234567890).
3.2 Device Interface Overview
Once powered on, the Dash Cam displays a main interface with a status bar, real-time preview, and function buttons.
- Boot Screen: Upon powering on, you'll see the boot screen. Follow prompts to set language and date/time.
- Home Screen: Displays recording status, date and time, memory card status, Wi-Fi and audio recording status, real-time video preview, and function buttons.
- Settings Interface: Press the Settings button to access various parameters for customization.
3.3 Video Functions
The Dash Cam offers several video-related functions:
- Preview Video: View live footage directly on the device screen or through the DDPAI App in real-time.
- Playback Video: In the app, drag the progress bar to select a time point or tap a thumbnail to play recorded videos. Different colored segments on the timeline indicate different video types (e.g., red for emergency events, yellow for parking monitoring).
- Download Video: Download videos from the Dash Cam to your phone's local album via the app. Videos can be downloaded by selecting a time point on the progress bar or by selecting specific files from the "Device" interface.
3.4 Photo Functions
The Dash Cam supports both automatic and manual photo capture.
- Collision Sensing Photography: The Dash Cam automatically takes pictures when it detects a collision or emergency braking.
- Manual Photography: Tap the camera icon in the preview interface to take a photo.
- Viewing Photos: View captured photos and videos in the "Device Album" via the DDPAI App. Downloaded files are stored in the "Local Album" on your phone.
3.5 Parking Monitoring
When using an intelligent hardwire kit, the Dash Cam can enter parking monitoring mode when the vehicle is turned off.
- Parking Mode: Time-lapse Video Recording: The Dash Cam records time-lapse video. If a collision occurs, it takes a photo and records a related video.
- Parking Mode: Normal Video Recording: Maintains normal recording after the car is turned off until a set time or low voltage is detected.
- Parking Mode: Sleep: The device enters sleep mode. Upon collision, it wakes up to record a 30-second video.
3.6 Advanced Driver Assistance System (ADAS)
The ADAS feature provides intelligent driving assistance.
- Enable ADAS Function: In the DDPAI App, go to "Device Settings" and turn on "Advanced Driver Assistance System".
- Set ADAS Sensitivity: Choose between High, Medium, or Low sensitivity for alerts. High sensitivity provides a wider alarm range, suitable for novice drivers.
- Fatigue Driving Voice Alert: Enable this feature in "Device Settings" to receive voice prompts reminding you to rest during long drives.
3.7 Data Transmission
To access recorded files directly, remove the memory card from the Dash Cam, insert it into a card reader, and connect it to a computer. Open the "DCIM" folder to browse or edit photos and videos. Regular recordings and time-lapse files are prefixed with "S", while voice-triggered photos are prefixed with "N" and collision-triggered photos with "G".
4. Maintenance
4.1 Firmware Upgrade
To ensure optimal performance, keep your Dash Cam's firmware updated. Connect the Dash Cam to the DDPAI App, go to "Me" > "About DDPAI" > "Check version". The app will automatically detect if new firmware is available. Follow the on-screen instructions to upgrade.
Note: Do not cut off power during the upgrade process. If an upgrade fails due to power loss, contact customer service or manually copy the upgrade package to the DCIM folder of the device.
4.2 Safety Precautions
- Do not operate the Dash Cam or watch videos on your phone while driving. Prioritize driving safety.
- Do not install the Dash Cam in a location that obstructs your driving view.
- Use only the power cord included in the product package to avoid fire or electric shock.
- Always use a branded Micro-SD card (up to 256GB). Do not insert or remove the card while the device is on. Format the card via the app before first use and regularly thereafter.
- Do not attempt to open or repair the Dash Cam yourself. For product failures, contact official customer service.
- The Dash Cam can be powered by an adapter for use outside of vehicles; ensure the adapter meets standard requirements.
5. Troubleshooting (FAQ)
Here are answers to common questions and issues you might encounter.
- Q: How do I format a memory card?
- A: Method 1 (On Device): Press the Settings button on the device's home screen, select "Format," and confirm. Method 2 (Via App): Connect to the app, go to "Camera Settings" > "Storage Management" and select format. Method 3 (Via Computer): Remove the card, insert it into a card reader, connect to a computer, right-click the card drive, and select "Format".
- Q: What is the Wi-Fi password of the Dash Cam?
- A: The default Wi-Fi password is "1234567890".
- Q: Can I change the Wi-Fi password of the Dash Cam?
- A: Yes. Connect to the app, go to "Device Settings" > "Device Wi-Fi Password", enter a new password, confirm, and save.
- Q: How do I reset the Dash Cam?
- A: If the device is in an abnormal state, press the function button for approximately 6 seconds to reset it. The device will automatically restart after a successful reset.
- Q: What if I forget the Wi-Fi password?
- A: Press the confirm button for approximately 6 seconds to reset the device. Then reconnect the Dash Cam using the default password (1234567890).
- Q: What should I do if the time is incorrect?
- A: Connect your device to your mobile phone via the DDPAI app, and ensure the app is connected to the camera's Wi-Fi. The camera will automatically synchronize the phone's time through the app.
6. User Tips
- Power Source: The Pictrey A400 Dash Cam does not include an internal battery for operation. It requires continuous power from your vehicle's 12V cigarette lighter socket or an optional hardwire/OBD kit.
- Memory Card Management: Always use a high-quality, branded Micro-SD card (up to 256GB) and format it regularly through the DDPAI app to ensure smooth operation and prevent data corruption. Avoid removing the card while the device is powered on.
- Optimal ADAS Performance: For accurate ADAS (Advanced Driver Assistance System) functionality, ensure the Dash Cam is properly calibrated during installation using the DDPAI app's live preview feature.
- Parking Mode: To utilize the 24/7 parking monitoring feature, an intelligent hardwire kit is necessary. This ensures the Dash Cam receives continuous power even when the vehicle is off.
7. Specifications
| Feature | Detail |
|---|---|
| Model | A400 |
| Input | 5V-2A |
| Storage | Supports Micro-SD card up to 256GB |
| Resolution | 4K (3840x2160) |
| Display | 1.9 inches |
| Aperture | F2.0 |
| Encoding Technology | Support H.265 |
| Field of View (FOV) | 125° |
| Wi-Fi | 2.4GHz |
| Super Capacitor | Supported |
| Bluetooth | BLE5.0 |
| Video Format | MP4 |
| Dimensions | 100.5mm x 66.7mm x 51.7mm |
| Working Temperature | -20°C to 60°C (-4°F to 158°F) |
| Storage Temperature | -40°C to 85°C (-40°F to 185°F) |
| Weight | 100g |
| Built-in Screen | Yes |
| Loop-Cycle Recording | Yes |
| Rear Camera | None |
| Touch Screen | No |
| Max External Memory | 256G |
| Number Of Lenses | 1 |
| OSD Language | Arabic, Chinese (Traditional), English, French, German, Hebrew, Japanese, Korean, Polish, Portuguese, Russian, Spanish, Thai, Turkish, Vietnamese |
| Assembly Mode | Portable Recorder |
| Chipset Manufacturer | HISILICON |
| Frames Per Second | 25 |
| Item Type | Car DVR |
| Certification | CE |
8. Warranty and Support
The Pictrey A400 Dash Cam comes with a 1-year warranty from the date of purchase.
For any product failures or technical assistance, please contact the official customer service for relevant consultation and support. Do not attempt to open or repair the device yourself, as this may void the warranty.