LUXCEO P200

Contents

LUXCEO P200 RGB Video Light Tube User Manual

Portable Waterproof Hand-held LED Photography Light

1. Safety Information & Precautions

Thank you for choosing the LUXCEO P200 RGB Video Light Tube. Please read this instruction manual carefully before use to ensure proper operation and to prevent damage.

Important Safety Notes:

  • Keep the batteries away from fires and high temperatures.
  • Do not place the light in fire, as it may explode.
  • Do not modify, disassemble, beat, or strike the product.
  • Always check the voltage requirements before using to avoid damage.
  • Children should use this product under adult supervision. To prevent eye injury, do not look directly at the glowing surface.
  • Charge the light at least once every three months to maintain battery health.
  • Do not charge the light in water or a wet environment.
  • Unplug the power cord when not using the light for extended periods to avoid injury and damage.
  • Do not put the product in a damp environment or water when charging.

Immediately discontinue use and seek technical assistance if:

  • Any liquid, including rain or water, spills into the product.
  • The product emits gas or exhibits unusual flickering.
  • The charging cable is damaged, exposing bare wires.
  • The product's outer shell is broken.

2. Package Contents

Please verify that all items are included in your package:

  • P200 Video Light x1
  • Remote Control x1
  • User Manual x1
  • Lanyard x2
  • Metal Plate x1
  • USB-C Cable x1
Diagram of LUXCEO P200 package contents
Figure 2.1: Package List for LUXCEO P200

3. Product Overview

The LUXCEO P200 is a versatile RGB video light tube designed for photography and videography. It features adjustable brightness and color temperature, full RGB color mode, and multiple scene effects. It is IP67 waterproof, has built-in magnets for easy mounting, and can function as a power bank.

Diagram of LUXCEO P200 product appearance with dimensions and labeled parts
Figure 3.1: Product Appearance and Components

Key Components:

  • A: Lighting Cover
  • B: Power/Modes Button
  • C: Lanyard Hole
  • D: Waterproof Cover
  • E: Strong Magnet
  • F: USB Output Port
  • G: 1/4"-20 Thread (for tripod/light stand mounting)
  • H: Charging Indicator
  • I: USB-C Charging Port
  • J: Bluetooth Indicator
Infographic showing key features: APP Control, IP67 Waterproof, Magnet Adsorption, 360 Full Color, 150 LED Lamp Beads, Adjustable CCT 3000-6000K, CRI>95, 4000mAh Rechargeable battery
Figure 3.2: Key Features of LUXCEO P200

4. Setup and Charging

4.1 Initial Charging

Before first use, fully charge the P200 using the provided USB-C cable and a compatible power adapter (not included). The charging indicator (H) will show charging status.

4.2 Mounting Options

  • Handheld: The light is designed for comfortable handheld use.
  • Tripod/Light Stand: Use the 1/4"-20 thread (G) at the bottom to mount the light on a tripod or light stand.
  • Magnetic Mounting: The built-in strong magnets (E) allow for easy attachment to any iron surface.
  • Lanyard: Attach the lanyards to the lanyard holes (C) for secure carrying or hanging.
Images showing various mounting options: on tripod, magnetic, outdoor use, IP65 waterproof, and with a defensive rope.
Figure 4.1: Versatile Mounting and Usage Scenarios
Images demonstrating usage on a tripod, with a light grid, built-in magnet, and handheld.
Figure 4.2: Practical Usage Examples

5. Operating Instructions

5.1 Basic Operation (Using Power/Modes Button B)

  1. Power On: If the light is off, press button B once to turn it on. It will recall the last brightness and color temperature settings.
  2. Power Off: If the light is on, press button B once to turn it off.
  3. Change Lighting Modes: Double-press button B to cycle through lighting modes:
    • Cool White
    • Warm White
    • Red Light
    • Green Light
    • Blue Light
    • Red + Green Light
    • Red + Blue Light
    • Green + Blue Light
    • Colorful Light Changing
    • RGB Light
    • Red/Blue Warming Light
    • Flashing White Light
  4. Adjust Brightness: Long-press button B continuously to adjust brightness. Long-press again to adjust in the opposite direction (e.g., from dark to bright, then bright to dark). Brightness will not change once it reaches maximum or minimum.

5.2 Remote Control Operation

The included remote control allows for convenient adjustment of the light's settings. Ensure the product is turned on for the remote to function.

LUXCEO P200 light with remote control and smartphone app interface
Figure 5.1: Remote and App Control Overview
LUXCEO P200 light with remote control and smartphone app interface
Figure 5.2: Remote and App Control

Remote Controller Function Illustration:

The remote control features dedicated buttons for:

  • ON/OFF
  • Brightness Plus / Brightness Minus
  • Light Color Changing
  • Colorful Lights Change Gradually
  • RGB Light
  • Warming Light
  • Flashing White Light
  • Specific color buttons: Cool White, Warm White, Red Light, Green Light, Blue Light, Red+Green Light, Red+Blue Light, Green+Blue Light.

Note: The 'Light Color Changing' button does not work in 'Red and Blue Warming Light' and 'Flashing White Light' modes. It adjusts the speed of color changing in 'Colorful Lights Change Gradually' and 'RGB Light' modes. It adjusts brightness in 'Warm White', 'Cool White', 'Red Light', 'Blue Light', 'Red+Blue Light', 'Red+Green Light', 'Green+Blue Light' modes.

5.3 Tuya Smart Application (Bluetooth) Operation

Control your P200 light tube via the Tuya Smart app for advanced features and convenience.

  1. Download App: Scan the QR code in the official user manual (PDF) or search for "Tuya Smart" in your app store to download the application.
  2. Connect the Phone:
    • Long-press the Power/Modes button (B) for 3 seconds to turn on Bluetooth (when the light is off).
    • If you have previously paired a mobile phone, you can directly use that phone to control the light.
    • To pair a new phone or clear existing pairings, long-press the Power/Modes button again after entering Bluetooth mode. The light will flash, indicating it's in pairing mode.
    • Enable Bluetooth on your mobile phone. Open the Tuya Smart Application.
    • Tap the "+" icon in the upper right corner.
    • Select "Lighting" then "Lighting (Bluetooth)".
    • Confirm that the light is blinking and complete the connection.
  3. Application Operation Interface:
    • Switch: Turn On/Off the light.
    • Color: Adjust White light mode, RGB full color mode.
    • Scene: Access 8 pre-set lighting application scenarios.
    • Music: Control lighting color and effects according to music rhythm and volume (features play music mode or microphone mode).
Diagram showing RGB color wheel, brightness adjustment from 1-100%, and CCT adjustment from 3000K to 6000K.
Figure 5.3: App Control Interface for Color and Brightness

6. Specifications

Attribute Value
Model NumberP200/P100
Lighting TypeRGB Video Light
Power6W (max)
Luminous Flux500lm (max)
CRIRa>95
Color Temperature (CCT)3000K-6000K
Brightness Adjustment Range5 - 100%
Battery TypeLi-ion 3.7V/4000mAh/14.8Wh
Run Time (100% Brightness)2.5 hours
InputDC5V/2.1A (MAX)
Output (Power Bank)DC5V/2.4A
Charging Time3 hours (with 2A adapter)
MaterialPC, Aluminum
Net Weight274g
Size37.5 × 37.5 × 201.5mm
IP RatingIP67 Waterproof
Operating Temperature0~40°C
Storage Temperature-10~50°C
CertificationsCE, FCC, RoHS

Note: The LED light source of this lamp is irreplaceable. If the LED light source reaches its end of life, the entire lamp should be replaced.

Image demonstrating the IP67 waterproof rating of the LUXCEO P200 light, with water splashing on it.
Figure 6.1: IP67 Waterproof Feature
Image showing the LUXCEO P200 light charging a smartphone via its USB output, highlighting its power bank function.
Figure 6.2: Versatile LED Light & Phone Charger

7. User Tips

  • Battery Life: The 4000mAh battery provides 2.5 hours of operation at 100% brightness. To extend battery life, consider using lower brightness settings when full power is not required.
  • Versatile Lighting: While excellent for accent lighting, creative effects, and fill light, this light may be too harsh for primary key lighting, potentially causing reflections. For main lighting, consider a larger light source with a softbox.
  • App Control Benefits: The Tuya Smart app offers more precise control over color, brightness, and scene modes compared to the remote control. It's recommended for fine-tuning your lighting setup.
  • Magnetic Mounting: Don't forget to utilize the built-in magnets for quick and easy placement on metal surfaces, expanding your creative options.

8. Troubleshooting

  • Light not turning on: Ensure the battery is charged. If the light is completely off, press the power button once.
  • Remote control not responding: Check if the light is powered on. The remote does not work if the product is turned off via the button switch.
  • App connection issues: Ensure Bluetooth is enabled on your phone and the light is in pairing mode (light flashing after long-pressing the power button). Follow the app connection steps carefully.
  • Brightness not changing: If long-pressing the power button doesn't change brightness, it might have reached its maximum or minimum level. Try releasing and pressing again to reverse the adjustment direction.
  • Unusual behavior: If the light exhibits gas emission, unusual flickering, or physical damage (cable, shell), immediately cut off power and seek technical assistance.

9. Warranty and Support

For technical support, warranty claims, or further assistance, please contact the seller or manufacturer directly. Refer to your purchase documentation for contact details.

An official user manual in PDF format is available for download. You can access it via the following link: LUXCEO P200 User Manual (PDF).

10. Product Demonstration Video

Watch this video for a visual demonstration of the LUXCEO P200 RGB Video Light Tube's features and capabilities.

Video 10.1: LUXCEO P200 Product Demonstration
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.