1. Introduction
Thank you for purchasing the LUXCEO P100 RGB Light Tube. This versatile handheld LED light is designed for photographic and video lighting, offering a wide range of colors, adjustable brightness, and special effects. Its compact design, magnetic adsorption, and dual 1/4-inch threads make it suitable for various creative lighting setups. Please read this manual carefully before use to ensure proper operation and maintenance.
2. Package Contents
- LUXCEO P100 RGB Light Tube
- Remote Controller
- USB-C Charging Cable
- User Manual (this document, also available as PDF: View PDF)

The image above displays the light tube, remote control, and USB-C charging cable, which are included in the package.
3. Product Overview
The LUXCEO P100 features a user-friendly design with intuitive controls and versatile mounting options.
3.1. Device Components

- Power Button (ON/OFF): Press to turn the light on or off.
- 'M' Switch Button (Shift Gear): Cycles through different lighting modes.
- '+/-' Knob (Add Subtract Knob): Adjusts brightness or other parameters depending on the mode.
- USB-C Charging Port: For charging the device.
- Charging Indicator: Shows charging status.
- Powerful Magnet: Located at the base for attaching to metal surfaces.
- 1/4-20 Thread: Standard mounting points on both ends for tripods or light stands.
3.2. Dimensions and Weight
- Length: 200mm (7.87 inches)
- Diameter: 41mm (1.61 inches)
- Net Weight: 163g

The P100 is designed to be lightweight and portable, easily fitting into bags or pockets.
4. Setup
4.1. Charging the Device
Before first use, fully charge the LUXCEO P100. Connect the supplied USB-C cable to the charging port on the device and plug the other end into a 5V/1A USB power source (e.g., wall adapter, computer USB port). The charging indicator will show the charging status. A full charge takes approximately 3 hours.
4.2. Mounting Options
The P100 offers flexible mounting for various scenarios:
- Tripod/Light Stand Mounting: Use the standard 1/4-20 inch nut on either end of the light tube to attach it to a tripod, light stand, or other photographic accessories.
- Magnetic Adsorption: The powerful magnet at the base allows you to attach the light to any metal surface. Once attached, the light body can be rotated 360 degrees to adjust the lighting angle precisely.

The image highlights the magnetic base and the 1/4-inch thread for flexible positioning.
5. Operating Instructions
5.1. Power On/Off
Press the Power Button (ON/OFF) to turn the light on or off.
5.2. Mode Selection
Press the 'M' Switch Button to cycle through the 12 available lighting modes, including CCT (Color Correlated Temperature) and various RGB and special effects modes.
5.3. Brightness Adjustment
Rotate the '+/-' Knob on the device to adjust the brightness from 5% to 100%. Alternatively, use the '+' and '-' buttons on the remote control (long press for continuous adjustment).
5.4. Color Temperature Adjustment (CCT Mode)
In CCT mode, rotate the '+/-' Knob or use the remote to adjust the color temperature between 3000K (warm light) and 6000K (cool light).

This image illustrates the visual difference between 3000K warm light and 6000K cool light.
5.5. RGB Mode
In RGB mode, the light provides precise color rendering, allowing you to select from a wide spectrum of colors to enhance your creative work.

Various color outputs in RGB mode are shown, demonstrating its versatility.
6. Special Effects Modes
The P100 includes four pre-programmed special effects modes to create dynamic scenes:
- Color Light Gradient Mode: Smooth transitions between different colors.
- RGB Color Mode: Static display of a chosen RGB color.
- Red & Blue Warning Mode: Flashing red and blue lights, simulating emergency lights.
- Lightning Mode: Simulates lightning flashes.

These icons visually represent the four special effects modes available on the device.
7. Remote Control Operation
The included remote control provides convenient access to all functions of the LUXCEO P100.

The diagram details each button on the remote and its corresponding function.
- Power Button: Turns the light On/Off.
- '+' / '-' Buttons: Adjust brightness (long press) or speed of color change (in FLASH and RGB modes).
- Colorful Light Gradient Button (FLASH): Activates color gradient mode.
- Flashing White Light Button: Activates flashing white light.
- Warm Light Button: Sets light to warm white.
- Red Light Button: Sets light to red.
- Red+Green Light Button: Sets light to a mix of red and green.
- Red+Blue Light Button: Sets light to a mix of red and blue.
- Warming Light Button: Activates a warmer light setting.
- RGB Light Button: Activates RGB color mode.
- White Light Button: Sets light to pure white.
- Blue Light Button: Sets light to blue.
- Green Light Button: Sets light to green.
- Green+Blue Light Button: Sets light to a mix of green and blue.
Note: The '+' and '-' buttons can adjust the speed of color changing under FLASH and RGB modes. For other color buttons (warm, white, red, blue, green, mixed colors), '+' and '-' adjust brightness under 'Warming Light' and 'FLASH' modes.
8. Charging
The LUXCEO P100 is equipped with a built-in 2000mAh rechargeable lithium battery.
- Battery Capacity: 2000mAh
- Battery Voltage: 3.7V
- Charging Port: USB-C
- Charging Time: Approximately 3 hours for a full charge.
- Run Time: Up to 1.5 hours of continuous use at maximum brightness.
- The device can be used while it is charging.

This image provides a visual representation of the 2000mAh battery and its continuous working time.
9. Maintenance
- Cleaning: Use a soft, dry cloth to clean the surface of the light tube. Do not use abrasive cleaners or solvents.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: If not used for extended periods, charge the battery at least once every three months to maintain its lifespan.
- Avoid dropping the device or subjecting it to strong impacts.
10. Troubleshooting
- Light does not turn on: Ensure the battery is charged. If not, connect it to a power source using the USB-C cable.
- Remote control not working: Check if there are any obstructions between the remote and the light. Ensure the remote's battery (if applicable) is functional. Point the remote directly at the light.
- Light flickers: Ensure the device is fully charged. If flickering persists, contact customer support.
- Cannot adjust brightness/color: Ensure you are in the correct mode for the desired adjustment. Try using both the device's knob and the remote control.
11. Specifications
| Feature | Specification |
|---|---|
| Model Number | P100 |
| Lighting Type | RGB Video Light |
| CRI (Color Rendering Index) | RA > 95+ |
| TLCI (Television Lighting Consistency Index) | 99+ |
| Color Temperature (CCT) | 3000K - 6000K |
| Luminous Flux | 400lm (max) |
| Power | 5W (max) |
| Input Voltage Range | USB (5-20V DC) / DV 5V 1A |
| Battery Capacity | 3.7V 2,000mAh |
| Run Time (max power) | Approx. 1.5 hours |
| Charging Time | Approx. 3 hours |
| Brightness Adjustment Range | 5% - 100% |
| Dimensions (L x D) | 200mm x 41mm (7.87in x 1.61in) |
| Net Weight | 163g |
| Mounting | Dual 1/4-20 inch threads, Magnetic adsorption |
| Battery Included | Yes |
| Inbox Adaptor | No |
| Origin | Mainland China |
| Certification | CE, FCC, RoHS |

The P100 boasts high CRI and TLCI values for accurate color reproduction.
12. User Tips
- Versatile Positioning: Take advantage of both the dual 1/4-inch threads and the strong magnets. The rotatable body allows for precise light direction, making it easy to achieve desired lighting angles for any shot.
- Remote Control Efficiency: The remote control is highly effective for adjusting settings without disturbing your setup. Remember to long-press the '+' or '-' buttons for continuous brightness adjustments.
- Creative Lighting: Experiment with the various RGB colors and special effects modes to add dynamic and creative elements to your photos and videos.
13. Warranty & Support
For warranty information, technical support, or service inquiries, please refer to the seller or the official LUXCEO website. Keep your proof of purchase for warranty claims.
14. Product Demonstration Video
This video provides a visual guide to the features, controls, and various lighting effects of the LUXCEO P100 RGB Light Tube.