NEEWER TL21C

Contents

NEEWER TL21C RGB Light Wand with Desk Tripod User Manual

Model: TL21C

1. Introduction

The NEEWER TL21C RGB Light Wand is a versatile and portable lighting solution designed for photography, videography, live streaming, and creative lighting effects. It features a lightweight tube design, built-in rechargeable batteries, magnetic attachment capabilities, and comprehensive control via an intuitive app. This manual provides detailed instructions for safe and effective use of your TL21C RGB Light Wand.

NEEWER TL21C RGB Light Wand with included accessories and app interface
Figure 1: NEEWER TL21C RGB Light Wand with accessories and app control.

2. Safety Notes

2.1 General Safety Precautions

  • Handle the product with care to avoid dropping, colliding, or exposing it to strong impact.
  • Avoid direct eye contact with the light to prevent any potential visual impairment.
  • Keep the product away from flammable and explosive materials.
  • Do not use the product in rainy or humid environments.
  • Turn off the power when the product is not in use.
  • If the product is not used for an extended period, store it in a well-ventilated, dry place away from heat and magnetic fields.

2.2 Battery Warning

  • Do not attempt to detach, modify, or repair the battery yourself. Unauthorized operation may cause battery leakage, overheating, burning, and other hazards.
  • Be sure to use the provided or certified chargers to prevent overcharging and short circuits.
  • If unusual charging speed or indicator flashing occurs, stop charging immediately and contact customer service.
  • Keep away from inflammable and explosive items.

3. Package Contents

Please check that all items are included in your package:

  • 1 x TL21C RGB Light Stick
  • 1 x USB Type C Cable
  • 1 x Desktop Tripod
  • 1 x User Manual (this document)
Diagram showing the TL21C RGB Light Stick, USB Type C Cable, and Desktop Tripod
Figure 2: Included package contents.

4. Product Overview

Familiarize yourself with the components of the TL21C RGB Light Stick:

Product illustration with numbered parts of the light wand
Figure 3: Product Illustration and Controls.
  1. 1/4" Screw Hole
  2. Diffusion panel
  3. Display Screen
  4. Type C Charging Port
  5. "Setting" - Button
  6. Setting Switch Button
  7. "Setting" + Button
  8. Power On/Off/MODE Button

Long press the Power On/Off/MODE Button and Setting + / Setting - Buttons for quick adjustments.

5. Setup

5.1 Charging the Light Wand

Use the provided Type C charging cable to connect the light wand to a 5V/2A or 9V/2A power source. The battery symbol on the display screen will flash continuously while charging and remain fixed once a full charge is reached.

Image showing the Type C charging port and battery indicator
Figure 4: Type C Charging Port and Battery Indicator.

Note: For optimal battery longevity, please fully charge the device before first use.

5.2 Mounting Options

  • Installation on a Light Stand/Tripod:

    Mount the stick light on top of a light stand or the included desktop tripod using either of the 1/4" screw holes located at both ends of the light wand.

    Close-up of the 1/4 inch screw hole on the light stick
    Figure 5: Standard 1/4" Screw Hole for mounting.
  • Attaching to Metal Objects:

    The light wand features built-in magnets, allowing you to directly attach the back of the stick light to any ferrous metal surface for flexible positioning.

Examples of multiple ways to use the light stick: handheld, magnetic attachment, and with a light tripod
Figure 6: Multiple ways to use the light stick.

6. Operation

6.1 Power On/Off and Mode Switching

  • To turn the LED light on or off, long press the Power On/Off/MODE Button (8).
  • To switch between different modes (CCT, HSI, FX), short press the Power On/Off/MODE Button (8).

6.2 Adjusting Settings

The light wand offers various adjustment modes:

  • Brightness Adjustment:

    In any mode, short press the Setting Switch Button (6) to change the level of brightness. When the '>' indicator points to the brightness value on the display, adjust the setting using the Setting + Button (7) and Setting - Button (5).

  • Color Temperature (CCT) Adjustment:

    Short press the Power On/Off/MODE Button (8) to switch to CCT mode. Short press the Setting Switch Button (6) to toggle the '>' indicator to the color temperature value on the screen. Then, use the Setting + Button (7) and Setting - Button (5) to adjust the color temperature (2500K-8500K).

  • GM Value Adjustment (CCT Mode):

    While in CCT mode, short press the Setting Switch Button (6) until the '>' indicator points to the GM value. Use the Setting + Button (7) and Setting - Button (5) to adjust the red and green compensation value.

  • Hue (HSI) Adjustment:

    Short press the Power On/Off/MODE Button (8) to switch to HSI mode. Short press the Setting Switch Button (6) to toggle the '>' indicator to the 'H' (Hue) value on the screen. Then, use the Setting + Button (7) and Setting - Button (5) to adjust the hue (0-360°).

  • Saturation (HSI) Adjustment:

    While in HSI mode, short press the Setting Switch Button (6) to toggle the '>' indicator to the 'S' (Saturation) value on the screen. Then, use the Setting + Button (7) and Setting - Button (5) to adjust the saturation (0-100).

  • Scene Effects (FX Mode):

    Short press the Power On/Off/MODE Button (8) to switch to FX mode. Short press the Setting Switch Button (6) until the '>' indicator points to the scene mode. Use the Setting + Button (7) and Setting - Button (5) to switch between the 17 different scene effects:

    Lightning Paparazzi Bulb Explosion Welding CCT Flash Hue Flash CCT Pulse HUE Pulse Cop Car Candle HUE Loop CCT Loop INT Loop TV Screen Fireworks Party
    Illustration of 17 scene effects available on the light wand
    Figure 7: 17 Scene Effects.

6.3 App Wireless Control

The TL21C RGB Light Wand can be easily controlled using the "NEEWER" app via Bluetooth connectivity. To set up:

  1. Scan the QR code provided on the app prompt card (usually included in the package or found in the full PDF manual) to download the "NEEWER" app.
  2. Follow the in-app instructions for pairing your device.
  3. Once the Bluetooth symbol on the light wand's display stops flashing, it indicates a successful Bluetooth connection.

Within the app, you can change brightness, color temperature, and saturation, select scenes, and save multiple presets. An RGB color wheel allows for precise color selection. The app also supports OTA firmware upgrades.

Screenshot of the NEEWER app interface for controlling the RGB light wand
Figure 8: NEEWER App Wireless Control Interface.

7. Maintenance

  • Clean the light wand with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
  • Ensure the Type C charging port is free from dust and debris.
  • When not in use for extended periods, store the light in a cool, dry, well-ventilated area, away from direct sunlight, heat, and strong magnetic fields.
  • Periodically check the 1/4" screw holes for any damage or wear.

8. Troubleshooting

  • Light not turning on:

    Ensure the battery is charged. Connect the light to a power source using the Type C cable and check if the battery indicator shows charging. Long press the Power On/Off/MODE button to power on.

  • Unusual charging behavior (flashing indicator, slow charging):

    Stop charging immediately. Ensure you are using the provided or a certified 5V/2A or 9V/2A Type C charger. If the issue persists, contact customer service.

  • App connectivity issues:

    Ensure Bluetooth is enabled on your mobile device and the light wand. Make sure the light wand is within the 164’ (50m) operating range. Restart both the app and the light wand, then attempt to reconnect.

  • Light output flickering or inconsistent:

    Check the battery level. If low, recharge the device. Ensure the light is not exposed to extreme temperatures or strong magnetic fields.

9. Specifications

Feature Specification
ModelTL21C
LED Quantity195PCS
Input Voltage, Current5V 2A/9V 2A
Maximum Power10W
Built-in Battery7.2V 2550mAh 18.36Wh
Charging Time110 minutes (fast charge), 140 minutes (slow charge)
Fast Charge ProtocolSupports PD3.0 fast charge protocol
Battery Life140 minutes (100% brightness)
Color Rendering IndexCRI 95+
Maximum Illuminance730 Lux/0.5m
Color Temperature Range2500K-8500K
Brightness Range0%-100%
RGB Color Spectrum0-360° Full Color
Saturation Range0-100
Scenes17 types
Operating Temperature0°C~40°C
Net Weight270g
Dimensions228 x 40 x 45mm
Frequency Range2402MHz-2480MHz
Maximum radio-frequency power-0.09dBm
Diagram showing the dimensions and weight of the light stick and tripod
Figure 9: Physical dimensions and weight.

10. User Tips

  • Tripod Height:

    The included desktop tripod has an adjustable height, ranging from a minimum of 7.9 inches (20 cm) to a maximum of 20.8 inches (53 cm).

  • Initial Battery Charge:

    For optimal battery longevity and performance, it is recommended to fully charge the light wand before its first use.

11. Warranty and Support

For detailed warranty information, technical support, or further assistance, please refer to the official NEEWER website or contact their customer service. A comprehensive user manual in PDF format can be viewed or downloaded from the following link: NEEWER TL21C User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.