SYNCO XView M4 Selfie Monitor Screen User Manual

Introduction

Thank you for choosing the SYNCO XView M4 Selfie Monitor. This device is designed to enhance your smartphone photography and videography experience by providing a dedicated back camera monitor with Bluetooth control for both iOS and Android devices. Please read this manual carefully before use and follow all instructions mentioned herein to ensure proper operation and longevity of your product.

The SYNCO XView M4 Selfie Monitor, designed for smartphone photography.

Package Contents

The SYNCO XView M4 package includes the following items:

• M4 Selfie Monitor x1
• Magsafe Ring Sticker x1
• Charging Cable x1 (Type-C)

Product Overview

Familiarize yourself with the components and controls of your SYNCO XView M4 monitor:

The 4-inch high-definition full-color screen with 400cd/m² ultra-high brightness ensures every detail is presented clearly.

1. Wireless Shutter / Aspect Ratio Adjustment Button
2. Screen Mirror / Rotation Button
3. Volume / Brightness + Button
4. Volume / Brightness - Button
5. Power On/Off Toggle
6. TYPE-C Charging Port
7. Speaker

Installation

To attach the SYNCO XView M4 to your smartphone:

1. Attach the magnetic ring (included) to the back of your phone. Ensure it is centered for optimal attachment.
2. Align the magnet area on the back of the M4 with the magnetic ring on your phone.
3. Allow the M4 to attach securely into place.

Operations

1. Charging

Use the provided Type-C cable to charge the device. The recommended input is 5V=2A.

2. Power On/Off

• Power On: Slide the power switch (5) to the "On" position.
• Power Off: Slide the power switch (5) to the "OFF" position.

3. Phone Pairing

The XView M4 offers both screen projection and camera control functionalities.

Instant, WiFi-free connection with ultra-low 40ms latency and 50m range.

3.1 Screen Projection

1. Swipe down from the top-right corner of your phone screen to open the control center.
2. Enable the screen projection function on your phone (Android: Wireless Projection, iOS: Screen Mirroring).
3. Click to connect to the device named "SYNCO-XXXX".
4. Note: Some phones may require a PIN code (1234) for the first-time connection.

3.2 Camera Control

1. Enable Bluetooth on your phone.
2. Click to connect to the device named "Photo-xxxxxx".

4. Wireless Shooting

Once connected via Bluetooth, open your phone's camera application and short press the Wireless Shutter button (1) on the M4 to shoot photos or record videos.

5. Aspect Ratio Adjustment

Long press the Wireless Shutter / Aspect Ratio Adjustment button (1) to switch between full-screen and standard aspect ratios.

6. Screen Mirroring

Short press the Screen Mirror / Rotation button (2) to flip the screen horizontally, useful for selfie monitoring.

7. Screen Rotation

Long press the Screen Mirror / Rotation button (2) to rotate the screen 180° clockwise.

8. Volume Adjustment

Short press the Volume / Brightness + button (3) or Volume / Brightness - button (4) to increase or decrease the volume (3 levels).

9. Brightness Adjustment

Long press the Volume / Brightness + button (3) or Volume / Brightness - button (4) to increase or decrease brightness (3 levels).

Specifications

User Tips

• The monitor can maintain a stable connection and image reception up to approximately five meters from the phone.
• Utilize your phone's rear camera for superior resolution and crisp details, as the M4 allows you to monitor the rear camera feed effectively.
• The WiFi-free connection ensures you can livestream or browse without disconnecting from your home or mobile network.

Troubleshooting

If you encounter issues with your SYNCO XView M4, consider the following:

• No Power: Ensure the device is fully charged using the provided Type-C cable. Check the power switch is in the "On" position.
• Connection Issues: For screen projection, ensure your phone's Wireless Projection (Android) or Screen Mirroring (iOS) is enabled. For camera control, verify Bluetooth is active and paired with "Photo-xxxxxx". If it's the first connection, try entering PIN 1234.
• Unresponsive Buttons: Ensure the device is powered on and fully charged. If issues persist, power cycle the device.
• Poor Image Quality: Check your phone's camera settings. Ensure the M4's screen brightness is adjusted appropriately.
• Intermittent Connection: Ensure you are within the 50m transmission range and there are no significant obstructions between the monitor and your phone.

For more detailed troubleshooting or persistent issues, please refer to the official user manual PDF available at SYNCO XView M4 User Manual (PDF) or contact customer support.

Maintenance

Caring For Your SYNCO Product

• Keep the product in a dry, clean, dust-free environment.
• Keep corrosive chemicals, liquids, and heat sources away from the product to prevent mechanical damage.
• Use only a soft and dry cloth for cleaning the product.
• Malfunction may be caused by dropping or impact of external force. Handle with care.
• Do not attempt to disassemble the product. Doing so voids the warranty.
• Have the product checked or repaired by authorized technicians if any malfunctions occur.
• Failure to follow all instructions may result in mechanical damage.

Warranty and Support

Warranty Period

Original SYNCO products are entitled to a 12-month limited warranty service. The warranty period begins on the date of purchase of brand new, unused products by the first end-user.

Within the warranty period, if a product defect or failure is attributable to material defect or technological problem, the defective product or part will be repaired or replaced without charge (service and materials fee).

Customers are entitled to free replacement or repair service in case of quality defect(s) found in the product under normal use within 30 days upon receipt of the product.

Warranty Exclusions and Limitations

Faults resulting from inappropriate use of a product without following its operation specification are not covered. This includes:

• Artificial damage, e.g., crash, squeeze, scratch, or soaking.
• Modifications to a product by its user or a third party without written consent of SYNCO, e.g., replacement of elements or circuits, label alteration.
• The code on the product is inconsistent with that of the warranty certificate, or the code on the product or warranty certificate is altered or torn off.
• All consumable accessories attached to a product, like cables, wind muffs, batteries.
• Faults as a result of force majeure, such as fire, flood, lightning, etc.

Warranty does not apply to human errors.

Warranty Claim Procedure

1. If failure or any problem occurs with your product after purchase, please contact a local agent for assistance, or you can always contact SYNCO's customer service through email.
2. Please retain your sales receipt and warranty certificate as proof of purchase. If any of these documents are missing, only sales return or chargeable service will be provided.
3. If the SYNCO product is out of warranty coverage, the service and parts cost will be charged.

Contact Information

Guangzhou Zhiying Technology Co., Ltd

• Address: Room 2401, 24 / F, South Tower, Lisheng Plaza, No. 68 Huadi Avenue, Liwan District, Guangzhou, China, 510000
• Email: support@syncoaudio.com
• Website: www.syncoaudio.com