saimili Portable LED Selfie Fill Light

Contents

Portable LED Selfie Fill Light User Manual

Model: Portable LED Selfie Fill Light

Brand: saimili

1. Introduction

Thank you for purchasing the saimili Portable LED Selfie Fill Light. This compact and versatile lighting solution is designed to enhance your photos and videos, providing optimal illumination for various scenarios. Its lightweight design, adjustable color temperature, and flexible mounting options make it an essential tool for content creators, selfie enthusiasts, and anyone needing better lighting on the go.

Mini LED Video Fill Light on a table
Figure 1: The Portable LED Selfie Fill Light. Mini and lightweight, portable and easy to use.

2. Safety & Warnings

Important Safety Information: Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • ATTENTION: Not suitable for children under 3 years old.
  • ATTENTION: Keep the device and its cord (if any) out of reach of children under 3 years old.
  • ATTENTION: Keep away from children unless supervised by an adult.
  • ATTENTION: Do not use this product for purposes other than its intended use.
  • ATTENTION: Inspect the product before each use; do not use if damaged.
  • ATTENTION: Follow installation and operation guidelines to avoid injury.
  • ATTENTION: Do not expose to water or moisture.
  • ATTENTION: Handle with care to avoid cuts or injuries.
  • Keep the fill light and its accessories away from children under 3 years old to prevent choking hazards (small parts such as batteries).
  • Do not use the fill light in environments with high temperatures (above 40°C/104°F) or low temperatures (below -10°C/14°F), as this may affect performance or cause damage.
  • Do not disassemble the fill light or battery by yourself; this will void the warranty and may cause injury or equipment damage. Contact authorized service centers for repairs.
  • Avoid pointing the light panel directly at the sun or other strong light sources for a long time, as this may damage the light panel or internal components.

3. Package Contents

Please check the package for the following items:

  • 1 x LED Fill Light (Lamp Holder)
  • 1 x Clip Mount

Note: 3 x AAA batteries are NOT INCLUDED and must be purchased separately.

4. Setup

4.1 Before First Use

  1. Remove all protective films, stickers, and packaging materials from the fill light.
  2. Open the battery compartment and insert 3 AAA batteries, ensuring correct polarity. Close the compartment securely.

4.2 Attaching the Fill Light

The fill light offers versatile mounting options:

  • For Smartphones/Laptops: Attach the provided clip mount to the fill light. Securely clip the assembly onto your smartphone, tablet, or laptop screen. Ensure the clip is stable and does not obstruct the device's camera or screen.
  • For Cameras: The fill light can be mounted directly onto a camera's hot shoe. Slide the base of the fill light into the camera's hot shoe mount until it clicks into place.
Diagram showing how to attach fill light to camera and phone
Figure 2: Attaching the fill light to a camera hot shoe and clipping it onto a smartphone.

5. Operating Instructions

5.1 Power On/Off

Press and hold the power button (usually located on the side or back of the light) for 2-3 seconds to turn the fill light on or off.

5.2 Adjusting Color Temperature

The fill light features CCT Dual Color Adjustment, allowing you to switch between cool, natural, and warm light settings. Press the power button briefly (after turning it on) to cycle through the available color temperatures:

  • Warm Light (3000K): Ideal for creating a cozy or intimate atmosphere.
  • Natural Light (4500K): Provides balanced illumination, suitable for most general photography.
  • Cool Light (6000K): Bright, crisp light, often used for professional-looking photos or videos.
CCT Dual Color Adjustment examples
Figure 3: Examples of 3000K, 4500K, and 6000K color temperatures.

5.3 Adjusting Light Angle

The fill light is designed with a flexible mount that allows for 180° rotation. You can adjust the light vertically and horizontally to direct illumination precisely where needed for optimal results.

Diagram showing 180 degree rotation
Figure 4: The fill light offers 180° vertical and horizontal rotation.

6. Maintenance

6.1 Cleaning the Light Panel

Use a clean, soft microfiber cloth to gently wipe the light panel in a circular motion. For stubborn stains, apply a small amount of lens cleaning solution to the cloth first, then gently wipe the panel. Avoid spraying solution directly onto the light panel.

6.2 Cleaning the Body

Wipe the body of the fill light with a dry microfiber cloth to remove dust and fingerprints. Do not use paper towels, rough cloths, or harsh chemicals (such as alcohol, bleach) as they may scratch the surface or damage the device.

6.3 Battery Maintenance

When not in use for a long time, remove the AAA batteries and store them in a cool, dry place. Replace batteries as needed when the light dims or stops functioning.

7. Troubleshooting

  • Light not turning on: Ensure 3 AAA batteries are correctly inserted with the right polarity. Check if the batteries are depleted and replace them if necessary.
  • Light flickering or dim: This usually indicates low battery power. Replace the AAA batteries with fresh ones.
  • Light not bright enough: Ensure the light panel is clean. Adjust the color temperature to see if a different setting provides better perceived brightness for your environment.
  • Light not holding position: Ensure the clip mount or hot shoe mount is securely fastened.

8. Specifications

Brand Namesaimili
ModelPortable LED Selfie Fill Light
Light SourceLED
Power7W
Luminous Flux249-2000 Lumens (approx.)
Color Temperature3000K-6000K (Infinitely adjustable)
Color Rendering Index (CRI)≥96RA
Voltage3V
Power SourceDRY BATTERY (3 x AAA, not included)
MaterialABS
Installation MethodSelf-contained clip / Hot shoe mount
CertificationCE
Dimensions (approx.)13 cm (L) x 8 cm (W) x 5 cm (H)
Weight (approx.)0.158 kg

9. User Tips

  • For best results, experiment with different color temperatures to match your environment or desired mood.
  • When using with a smartphone, ensure the clip does not cover any essential sensors or cameras.
  • Keep the light panel clean for optimal light output and quality.
  • Carry it in your pocket for quick access during outdoor photo shoots.
Light being carried in a pocket
Figure 5: The compact design allows for easy portability.

10. Warranty & Support

For warranty information and customer support, please refer to the seller or the original point of purchase. Keep your proof of purchase for any warranty claims.

Manufacturer Information:
Jinhua Jinwei Network Technology Co., Ltd
Building 2, No. 303 Qianfang Avenue, Xianhua Street,
Pujiang County, Jinhua City, Zhejiang Province, 322299, China

EU Authorized Representative:
SUCCESS COURIER SL
CALLE RIO TORMES NUM.1, PLANTA 1, DERECHA, OFICINA 3,
Fuenlabrada, Madrid, Spain 28947

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.