Introduction
Thank you for choosing the BRPOM 9500A Peak Jump Starter with 150PSI Air Compressor. This versatile device is designed to provide reliable power for jump-starting vehicles, inflating tires, charging electronic devices, and offering emergency lighting. Please read this manual thoroughly before use to ensure safe and optimal operation.
What's in the Box
Please verify that all the following items are present in your package:
- BRPOM 9500A Jump Starter & Air Pump Unit
- Smart Battery Clamps
- Air Hose
- Various Nozzle Adapters (e.g., for balls, different valves)
- USB Charging Cable
- User Manual
Specifications
| Feature | Specification |
|---|---|
| Peak Current | 9500A Peak (>1200 A) |
| Voltage | 12 V |
| Battery Capacity | 20000-30000 mAh |
| Number of Built-in Batteries | 4 |
| Conversion Rate | 85%~90% |
| Air Compressor Pressure | Up to 150 PSI |
| Engine Compatibility (Gas) | Up to 8.0L |
| Engine Compatibility (Diesel) | Up to 10.0L |
| Special Features | Lighting, Cigarette Lighter Starter, Warning Light, SOS Lighting, Power Bank, Air Compressor |
| External Testing Certification | MSDS, ROHS, FCC, CE |
| Item Weight | 1130g |
| Dimensions (L x W x H) | 13.00cm x 5.26cm x 17.00cm (5.11in x 2.07in x 6.69in) |
Setup and First Use
Before using the jump starter for the first time, ensure it is fully charged. Connect the provided USB charging cable to the device's input port and a suitable power adapter (not included). The battery indicator on the display will show the charging status. Charge until the indicator shows full capacity.
Operating Instructions
Jump Starting Your Car
- Step 1: Insert the starting cable. Connect the smart battery clamps cable securely into the designated jump start port on the BRPOM unit.
- Step 2: Connect the clamps. Attach the red positive (+) clamp to the positive terminal of your car's battery. Then, attach the black negative (-) clamp to the negative terminal of your car's battery.
- Step 3: Start your engine. Enter your vehicle and turn on the ignition to start the engine.
- Step 4: Remove the clamps. Immediately after your car starts, carefully remove the clamps from the car battery terminals, then disconnect the smart battery clamps cable from the jump starter unit.
Note: Remove the clip immediately after starting the car to prevent damage.
Using the Air Compressor (Inflator)
- Step 1: Connect the air hose. Screw the air hose onto the tire valve stem and ensure it is tightened securely to prevent air leakage.
- Step 2: Set desired pressure. Use the "+" and "-" buttons on the device's control panel to set your desired air pressure value (e.g., PSI, BAR, KPA, Kg/cm²).
- Step 3: Start inflation. Press and hold the power button to begin automatic inflation. The device will automatically stop when the preset pressure is reached. To stop inflation manually at any time, press the power button again.
- Switch inflation modes. Briefly press the power button to adjust pressure, and hold the power button to switch between different inflation modes (Car, Motorbike, Bicycle, Ball, Custom).
The air compressor supports various applications with recommended pressure ranges:
- Car: 26-51 PSI
- Motorbike: 26-45 PSI
- Bicycle: 30-65 PSI
- Ball: 4-16 PSI
- Custom Mode: 3-150 PSI
Using as a Power Bank
The BRPOM jump starter doubles as a portable power bank. It features multiple output ports (USB output ports) and input ports (USB input port, Type-C input port) to charge various electronic devices such as smartphones, tablets, and other USB-powered gadgets.
Using the LED Emergency Light
The device is equipped with a powerful 400 Lumen LED light, offering multiple modes for different situations:
- Stabilized LED White Light: For general illumination in dark environments.
- SOS Emergency Light: To signal for help in emergency situations.
- Strobe Light: For warning or attracting attention.
To activate and cycle through the light modes, press the dedicated light button on the device.
Maintenance
- Charging: Keep the device charged, especially if stored for long periods (e.g., every 3-6 months), to maintain battery health and prolong its lifespan.
- Storage: Store the jump starter in a cool, dry place away from direct sunlight, moisture, and extreme temperatures.
- Cleaning: Clean the exterior of the device with a soft, damp cloth. Do not use harsh chemicals, solvents, or abrasive cleaners.
- Inspection: Regularly inspect the smart battery clamps, air hose, and cables for any signs of damage, wear, or corrosion before each use. Replace damaged components immediately.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on | Low battery or no charge. | Charge the device fully using the provided USB cable. |
| Car does not start after jump attempt | Incorrect clamp connection; car battery too deeply discharged; car engine issue; jump starter battery too low. | Ensure clamps are correctly connected (red to positive, black to negative). Check jump starter battery level. Try again after a few minutes. If still no start, consult a mechanic. |
| Air compressor not inflating | Air hose not securely connected; incorrect pressure setting; device low on battery; nozzle adapter not suitable. | Ensure air hose is tightly screwed onto the valve. Check and adjust pressure settings. Charge the device. Use the correct nozzle adapter for the item being inflated. |
| LED light not working | Device low on battery; light mode not activated. | Charge the device. Press the light button to cycle through the available modes (stabilized, SOS, strobe). |
User Tips
- For optimal performance and longevity, keep the jump starter charged above 50% when not in active use.
- Always consult your vehicle's owner manual for specific jump-starting procedures and safety precautions before using this device.
- When inflating tires, always check the recommended PSI (or other pressure units) for your specific tire type, usually found on the tire sidewall or vehicle's door jamb, to avoid under- or over-inflation.
- Store the device in your vehicle for easy access during emergencies, but avoid prolonged exposure to extreme heat or cold.
Warranty and Support
For detailed warranty information, technical support, or service inquiries, please refer to the official BRPOM website or contact their customer service department. Please retain your purchase receipt as proof of purchase for warranty claims.
