Burhui Outdoor Garland LED String Lights User Manual

1. Product Overview

The Burhui Outdoor Garland LED String Lights are designed to provide a warm and inviting ambiance for various outdoor settings. Featuring durable, shatterproof G40 LED bulbs, these string lights are built to withstand different weather conditions, making them ideal for gardens, patios, weddings, holidays, and other decorative purposes.

2. Safety Information

• Do not operate the string lights with power on during installation or maintenance.
• No modification to the product is allowed.
• Stop using immediately if the product appears damaged.
• Adult supervision is required for minors during installation and use.
• This product works with 220V high-voltage power supply. Before use, ensure the power supply voltage matches the label on the product. Do not connect it to non-220V power supplies to avoid short circuits, electric shocks, device burnout, and other hazards.
• Do not use this product in high-temperature, flammable, or explosive environments (e.g., near open flames, heaters, gasoline, etc.) to prevent safety accidents.
• Avoid the string lights being crushed or pulled by heavy objects to prevent wire breakage.

3. Installation Guide

3.1 Fixing the String Lights

Hang or fasten the string lights in your desired position. Use appropriate tools such as hooks, ties, or clips for fixation. Apply moderate force to avoid squeezing or pulling the wire. Ensure the wire is laid out naturally without excessive bending, maintaining even distance between lamp holders for optimal decorative effect.

Image: Step-by-step guide showing how to insert the hook, install the G40 bulb into the lamp head, and tighten the bulb.

3.2 Power Connection

After all string lights are securely fixed and bulbs are installed, insert the plug of the string lights slowly into a compatible standard power socket (220V for EU plug, 110V for US plug). Ensure the plug is fully inserted for good contact and no looseness.

Image: Close-up of the EU plug with its waterproof cover, highlighting the connection point.

These string lights support end-to-end connection, allowing you to connect multiple strands to cover larger areas. Ensure the total wattage does not exceed the maximum recommended load for the circuit.

Image: Illustration of end-to-end plug connections for both EU 220V and US 110V plugs, including a spare fuse for safety.

4. Operation

Once installed and connected to power, the string lights will illuminate. These lights are designed for continuous operation in suitable outdoor conditions. They feature a warm white light (2200K) to create a cozy atmosphere.

The lights are shatterproof due to their plastic construction, making them more durable than traditional glass bulbs.

Image: Comparison highlighting the shatterproof plastic LED bulbs (0.6W) versus fragile glass incandescent bulbs (7W), emphasizing energy efficiency and durability.

Some models may support dimming functionality (25%-100%) to customize the atmosphere. Please check your specific product variant for dimmer compatibility (dimmer not included).

5. Maintenance

• Always disconnect the power before attempting any maintenance, removal, or repair of the string lights.
• Regularly check and tighten any loose bulbs to ensure proper contact and prevent flickering or non-illumination.
• Clean the bulbs and wires periodically with a soft, damp cloth. Do not use harsh chemicals or abrasive materials.
• Store the string lights in a dry, cool place when not in use for extended periods.

6. Troubleshooting

6.1 All Bulbs Not Lighting Up

1. Check the power switch to ensure it is in the 'ON' position.
2. Test the power outlet with another appliance to confirm it is functional.
3. Reinsert the plug firmly into the socket to ensure it is fully connected and there is no looseness.

6.2 Partial Bulbs Not Lighting Up

1. Disconnect the power supply to the string lights.
2. Carefully check each non-illuminated bulb and tighten any loose bulbs by screwing them clockwise until secure.
3. If tightening does not resolve the issue, replace the faulty bulb with a new one of the same type (E12 G40 LED, 0.6W).

7. Specifications

Image: Detailed parameters for the G40 bulbs, including dimensions (4cm x 6cm), voltage (220V), wattage (0.6W), base type (E12), and warm light (2200K).

7.1 Available Lengths and Bulb Counts

• 72FT (10 meters): 10 bulbs + 1 spare bulb.
• 80FT (24 meters): 30 bulbs + 1 spare bulb.
• 100FT (30 meters): 50 bulbs + 1 spare bulb.
• 118FT (36 meters): 60 bulbs + 4 spare bulbs.

Image: Diagram illustrating the 27FT (8M) cable length with 10 sockets and 10+1 G40 bulbs.

Image: Diagram illustrating the 80FT (24M) cable length with 30 sockets and 30+1 G40 bulbs.

Image: Diagram illustrating the 100FT (30M) cable length with 50 sockets and 50+1 G40 bulbs.

Image: Diagram illustrating the 118FT (36M) cable length with 60 sockets and 60+4 G40 bulbs.

8. User Tips

• Individual Bulb Replacement: A key advantage of these LED string lights is the ability to replace individual bulbs, extending the lifespan of your lighting setup.
• Expand Your Lighting: Utilize the end-to-end connectable feature to link multiple string lights together, creating a seamless and expansive lighting display for larger areas.
• Durable Design: The plastic G40 bulbs are shatterproof, offering greater durability and safety compared to traditional glass bulbs, especially in outdoor environments.
• Spare Bulbs: Keep any included spare bulbs handy for quick replacements, ensuring your string lights remain fully functional.

9. Warranty and Support

For warranty information, technical support, or any product-related inquiries, please contact the manufacturer directly. The manufacturer is Shenzhen Bohui Technology Co., Ltd. You can reach them via email at lighting2024@sina.com.

Please refer to the product packaging for specific warranty terms and conditions.

Image: Product packaging displaying the included components (sockets, LED bulbs, EU/US standard plugs) and basic instructions.