Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your new Viladepot Smart Door Knob D2. This smart lock offers multiple unlocking methods including fingerprint, passcode, mobile app control, and traditional mechanical keys, enhancing security and convenience for your home or office. Please read this guide carefully before use to ensure proper functionality and safety.
Packing List
Please check the contents of your package against the list below:
- Exterior Assembly x 1
- Interior Assembly x 1
- Latch Bolt x 1
- Lock Fixing Column x 1
- Fixing Column x 2
- Fixing Post x 2
- Latch Screws x 4
- Strike Plate x 1
- Plastic Box x 1
- Spring x 1
- Backup Keys x 2
- User Manual x 1 (PDF version available for download)
Installation Guide
Before proceeding with the installation, ensure your door meets the following specifications:
- Door Thickness: 30-50mm (1-3/16" - 2")
- Hole Diameter: 38mm (1-1/2") or 54mm (2-1/8")
- Backset: 60mm (2-3/8") or 70mm (2-3/4")
- Latching: Compatible with chiseled latch holes. Not compatible with Rim Cylinder or Mortise/Integrated lock types.
Watch the official installation video for a visual guide:
Step-by-Step Installation:
- Install Lock Body (Latch): Install the latch on the door first. Secure it with the provided screws.
- Install Copper Columns on Front Panel: Insert the two screw bolts on the front cover. Insert the hollow square bar into the bottom of the front handle, ensuring the data line sticks out. Use pliers to secure the copper columns.
- Remove Battery Baffle Plate and Install Screws: Remove the battery baffle plate from the interior assembly. Install the screws into the designated holes.
- Route Data Cable and Install Door Lock: Route the data cable through the square bar. Insert the exterior assembly into the door hole.
- Connect Rear Panel to Data Cables: Connect the data cables from the exterior assembly to the rear panel. Ensure the terminals are connected according to the red markings to prevent failure.
- Install Batteries and Baffles: Install 4 AAA alkaline batteries into the corresponding slots, observing positive and negative battery terminals.
- Install Battery Cover Retaining Ring: Ensure the small round hole on the battery cover retaining ring is in the upper left corner, aligning with the rear circuit board.
- Secure Battery Cover: Press firmly down on the battery cover, then rotate the retaining ring in a clockwise direction to secure it. To open, press firmly and turn counter-clockwise.
Operating Instructions
APP Configuration (Tuya Smart)
The Viladepot Smart Door Knob D2 integrates with the Tuya Smart app for advanced control and management.
- Download App: Download and install the "Tuya Smart" app from your device's app store.
- Prepare for Pairing: Open the Tuya Smart app. Click the "+" icon, then select "Add Device".
- Enter Match Mode on Lock: On the smart lock keypad, enter "1+1+SMART" followed by your admin password (default is 123456).
- Pair Device: After approximately 10 seconds, the device should automatically appear in the app. Click on it to complete the pairing process.
Note: If the device has already been added to another phone, it will not enter pairing mode but will go into standby mode.
Adding Fingerprints or Passcodes via App
- Access Member Management: In the Tuya Smart app, navigate to "Member Management".
- Select Method: Choose either "Fingerprint" or "Code" (for passcode) to add a new entry.
- Follow App Guide: Follow the on-screen instructions within the app to complete the setup. For fingerprints, you will typically be prompted to place your finger on the sensor multiple times from different angles.
Muting "Beep Beep" Sounds
- Access More Options: In the Tuya Smart app, click on "more".
- Mute Settings: Press "Mute Settings", then toggle the option to "open" to mute the sounds.
Unlocking Methods
The Viladepot Smart Door Knob D2 supports four ways to unlock:
- Fingerprint Unlock: Place your registered fingerprint on the sensor.
- Password Unlock: Enter your registered passcode on the touchscreen keypad.
- APP Unlock: Use the Tuya Smart app on your smartphone to unlock the door remotely via Bluetooth.
- Mechanical Key Unlock: Use the provided backup keys for traditional unlocking.
Maintenance
Battery Replacement
The smart lock requires 4 AAA alkaline batteries for power. We recommend replacing the batteries after 180 days of use, or promptly when the battery level drops below 30%. You can monitor the battery level via the Tuya Smart app.
Cleaning
To maintain the appearance and functionality of your smart lock, wipe it regularly with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.
Troubleshooting
- Q: Fingerprint recognition is not working.
- A: If the smart lock has power, try again by changing to a different angle when placing your finger on the sensor. Ensure your finger is clean and dry. If the lock has no power, you will need to use a spare mechanical key to unlock the door and replace the batteries. If none of these methods resolve the issue, please contact customer support.
- Q: How long after should I replace the battery?
- A: We recommend replacing the batteries after 180 days (approximately 6 months). Additionally, monitor the battery level weekly via the Tuya app and replace the batteries promptly if the level falls below 30%.
Specifications
| Attribute | Detail |
|---|---|
| Brand Name | Viladepot |
| Model Number | D2 |
| Power Supply | DRY BATTERY (4 x AAA batteries) |
| Protection Level | No Waterproof |
| Suitable for Mortise | 6068 |
| Fit Door Thickness | 30-50mm |
| Suitable Door Type | Steel Door, Wooden Door, Brass Door, Stainless Steel Door, Other |
| Finish Type | Painted |
| Doorknob Function | Biometric, Key & Keypad |
| Connectivity | Bluetooth |
| Ways To Unlock | App, Bluetooth, Mechanical Keys, Password, FINGERPRINT |
| Material | Aluminium Alloy |
| Handle Direction | Direction Reversible |
| Origin | Mainland China |
| Certification | FCC |
| Smart Home Platform | Tuya |
| Silent Mode | Yes |
User Tips
- Always keep your mechanical backup keys in a safe, accessible location outside the locked area for emergencies.
- Regularly check the battery status through the Tuya Smart app to avoid unexpected lockouts.
- When registering fingerprints, ensure your finger is clean and dry, and try different angles for better recognition accuracy.
- Consider enabling silent mode via the app if you prefer not to have audible feedback from the lock.
Warranty and Support
Your Viladepot Smart Door Knob D2 comes with a 30-day worry-free money-back guarantee and a one-year limited warranty.
For any problems or assistance, please feel free to contact us:
- Email: support@viladepot.com
A detailed user manual in PDF format is also available for download: Download User Manual (PDF)