Introduction
Thank you for purchasing the NYXI Wizard 2 TMR Joy-pad. This manual provides detailed instructions for setting up, operating, and maintaining your controller. Please read this manual carefully before use to ensure optimal performance and longevity of your device.
Video: Overview of the NYXI Wizard 2 TMR Joy-pad features and multi-platform support.
Package Contents
Ensure all items are present in your package:
- NJ10 Left Controller ×1
- NJ10 Right Controller ×1
- NJ10 Middle Bridge ×1
- Multi-function Receiver ×1
- USB-C Charging Cable ×1
- Receiver Extension Cable ×1

Image: The NYXI Wizard 2 TMR Joy-pad in white, disassembled, with its multi-function receiver and cables.
Specifications
| Feature | Detail |
|---|---|
| Connectivity | Bluetooth 5.0, 2.4G Wireless |
| Battery Capacity | 400mAh (per controller) |
| Charging | 5V/0.4A via USB-C |
| Materials | PC + ABS + Metal + Silicone |
| Weight | 225g |
| Dimensions | 106*155*65.5mm |
| Joystick Sensor Module Brand/Type | K-SLIVER (TMR Hall Effect) |
| Trigger Button Type | Linear |
| Compatible Platforms | Nintendo Switch, Nintendo Switch 2, PC, Android, iOS, NGC, Wii |
| Battery Included | Yes |
| Hall Effect | Yes |

Image: Diagram illustrating the TMR Hall-Effect Joystick technology for precise activation and anti-drift.

Image: Diagram showing Mechanical Tactile Switches (one million presses) and Mechanical Microswitches (five million presses).
Controller Layout Diagram
The following diagram illustrates the various buttons and components of the NYXI Wizard 2 TMR Joy-pad:

Image: Front view of the NYXI Wizard 2 TMR Joy-pad, highlighting its dual modes for different consoles.
Front View:
- LED Channel Light: Indicates connection status.
- Screen Button: (Left Controller)
- TMR Hall Joystick: (Left and Right) For precise analog input.
- Mechanical D-PAD: (Left Controller)
- Home Button: (Right Controller)
- Mechanical Microswitch ABXY Buttons: (Right Controller)
- C-Stick TMR Hall Joystick: (Right Controller)
- Setting Button: Located on the middle bridge.
Top/Bottom View:
- Type-C Charging Port: Located on the top edge of the middle bridge.
- R Button / L Button: Shoulder buttons.
- Lock Button: Located on the middle bridge.
- ZR/ZL Linear Hall Trigger: Analog triggers for nuanced input.
Rear View:
- MR Button / ML Button: Mappable back buttons.
- Left/Right Trigger Locks: For adjusting trigger travel.
- SL Button / SR Button: Side buttons on each controller.
- Reset: Small button for resetting the controller.
Setup and Connection
Connecting to Nintendo Switch
- Slide the controller downward along the rails on both sides of the console screen until it clicks. The "Controllers" interface on the console will display connected left/right controllers.
- To remove the controller, press the release button on the back of the controller and slide it upward.
- When the console is powered on, detaching the controller from the rails will automatically establish a Bluetooth connection with the Switch.
- When the console is powered off, detach the controller from the rails and press the Home Button to power on and reconnect.
- After successfully connecting to Switch, the controller vibrates for 1 second.
Receiver Connection to PC (Xinput Mode)
- Press and hold the Home Button for 3 seconds to power on. LEDs 1-4 on both controllers will flash green sequentially.
- Insert the multi-function receiver into the PC and press and hold its button until the LED blinks rapidly.
- Wait for pairing.
Receiver Connection to PC (Dinput Mode)
- In Xinput mode, press and hold A + B + Home to switch to Dinput mode. LEDs 1-4 will blink green three times.
- Repeat the same key combination to switch back to Xinput mode.
Receiver Connection to PC/NGC
- Press and hold the Home Button of the right controller for 5 seconds to turn on the device. LEDs 1-4 of the right controller will flash green.
- Plug the multi-function receiver into the computer, and press and hold the button on the receiver until the LED flashes quickly.
- Wait for the right controller and receiver to pair successfully. The LED lights on both the receiver and the controller will turn on.
- To connect the left controller: Press and hold the button on the receiver again until the LED flashes quickly. Then, press and hold the Screen Button on the left controller for 5 seconds until its LEDs 1-4 flash green. Wait for successful pairing.
Receiver Connection to Wii
- Turn on the Wii console, enter the game, and connect the original controller.
- After entering the game, unplug the original adapter, then plug the NJ10 receiver into the console. Press and hold the button on the receiver until the LED flashes quickly.
- Press and hold the Home Button of the right controller for 5 seconds to turn on the device. LEDs 1-4 of the right controller will flash green.
- Wait for the right controller and receiver to pair successfully. The LED lights on both the receiver and the controller will turn on.
- To connect the left controller: Press and hold the button on the receiver again until the LED flashes quickly. Then, press and hold the Screen Button on the left controller for 5 seconds until its LEDs 1-4 flash green. Wait for successful pairing.
Operating Instructions
Joystick Calibration
- Press SL + SR + + Button (left controller: - Button) to enter calibration mode.
- Rotate both joysticks through their full range of motion.
- Press the same keys (SL + SR + + Button) again to exit. A 1-second vibration confirms completion.
- For Switch System Calibration: Navigate to System Settings > Controllers & Sensors > Calibrate Control Sticks and follow on-screen instructions.
Trigger Calibration
- Press SL + SR + Home (left controller: Capture Button) to enter calibration mode.
- Press both triggers fully.
- Exit using the same keys (SL + SR + Home). A 1-second vibration confirms completion.
6-Axis Gyroscope Calibration
- On Switch: Navigate to System Settings > Controllers & Sensors > Calibrate Motion Controls.
- Place the controller on a flat surface and follow on-screen prompts. Press - and + Buttons to complete calibration.
Turbo Function
- Supported Buttons: D-pad, A, B, X, Y, L, R, ZL, ZR.
- Enable Turbo: Hold the Setting Button, press a target button, then release. LED4 will glow white.
- Adjust Speed: Default is 12Hz (adjustable via app).
- Disable Turbo: Press the Setting Button + target button three times. LED4 will turn off.
Button Programming (Mappable Back Buttons)
The back buttons (M1/M2) can be mapped to other buttons or macros (max 21 actions per macro).
- Mapping: Hold the Setting Button + target back button (M1 or M2) for 3 seconds. Press the desired button/macro sequence, then press the back button again to save.
- Clear Mapping: Hold the Setting Button + back button for 3 seconds, then press the back button without any input.
User Tips
- For optimal performance, ensure your controller's joysticks and triggers are calibrated regularly, especially if you notice any drift or inconsistent input.
- The controller supports multiple platforms including Nintendo Switch, PC, NGC, and Wii. Refer to the specific connection instructions for each platform.
- The Wizard 2 TMR Joy-pad is designed to function as both a Joy-Con like controller for Switch and a GameCube style controller, offering versatile gameplay options.
- If you are comparing different versions of the NYXI Wizard 2, always check the model number and specific features listed, as functionalities may vary slightly between editions.
Maintenance
- Do not expose the controller to liquid.
- Do not disassemble the controller.
- Avoid dropping the controller.
- Avoid exposing the controller to extremely high or low temperatures.
- Clean the controller with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
Troubleshooting
- Controller not connecting: Ensure the controller is charged. Follow the specific connection steps for your platform carefully. If using the receiver, ensure it's properly plugged in and its LED is blinking as expected during pairing.
- Drifting joysticks or unresponsive triggers: Perform joystick and trigger calibration as described in the "Operating Instructions" section.
- Buttons not responding: Check if any button programming (macros) might be interfering. Try clearing button mappings if necessary.
- Interference: If experiencing wireless interference, try to reduce the distance between the controller/receiver and the console/PC, and ensure there are no large metal objects or other wireless devices causing interference.
- General issues: Try resetting the controller using the small reset button (refer to the Controller Layout Diagram for location).
Compliance and Support
Declaration of Conformity
Model: NJ10
The product conforms to EC standards for radio interference. Shenzhen MIKE Morgen Technology Co., Ltd. declares that NJ10 radio equipment conforms to the Directive. Applicable standards include EN IEC 62368-1:2020+A11:2020, EN 50663:2017, EN 62479:2010, ETSI EN 301 489-1 V2.23(2019-11), ETSI EN 301 489-17 V3.2.4(2020-09), ETSI EN 300 328 V2.2.2(2019-07).
The full text of the EU Declaration of Compliance can be found on: www.nyxigame.com
FCC Statement
Model: NJ10
FCC ID: 2A88F-NJ10
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class C digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and receiver.
- Plug the equipment into a socket on a circuit different from that to which the receiver is connected.
- Consult your distributor or an experienced radio/TV technician for help.
Environmental Information
The crossed-out wheeled bin symbol indicates that the product should not be disposed of with household waste but should be brought to an appropriate collection point for recycling. According to local regulations, do not dispose of the product or rechargeable battery with normal household waste. Appropriate disposal of used products and rechargeable batteries helps to prevent negative impacts on the environment and human health.