Introduction
This manual provides detailed instructions for the safe and effective use of your Vilnason Handheld Red Light Therapy Device. This device utilizes both 650nm red light and 808nm infrared light for various applications including skin rejuvenation, muscle and joint pain relief, and overall health care. Please read this manual thoroughly before first use and keep it for future reference.
Safety Instructions
WARNING: Failure to follow these safety instructions may result in injury or damage to the device.
- Place this product and related accessories in a cool and dry place.
- After fully charged, please unplug the product charging plug and do not overcharge for a long time.
- The instrument should be handled with care to prevent it from falling or hitting from a height, causing damage to the instrument or injuring others.
- The surface of this device is hot, so people who are not sensitive to heat sources must be careful when using it.
- Fully charge this product at least once a month (i.e. fully charged) to extend the battery life.
- Do not allow water or other flammable cleaning agents to enter this product and charger to avoid electric shock and fire.
- Do not use original accessories and external brand charging devices to avoid damage to the machine function.
- Do not use corrosive items to clean this product. Do not use the instrument with cosmetics, creams, gels or ointments.
- Do not let children play with this device and accessories. Make sure to keep the device away from children to avoid injuries and other dangers when they play.
- Do not pull or twist the power cord to avoid malfunctions. Do not disassemble the machine by yourself.
- Do not put the device on your eyes. Do not look directly at the light when using the device to avoid eye discomfort. It is best to wear the protective glasses provided.
- Do not use on dark skin, hair or freckles.
- Do not use on deep wounds or bleeding wounds.
- Pregnant women and children under 13 years old cannot use the device.
- If you have highly sensitive skin, people with hematuria or hypertrophic scars, you should not use the device. This may cause skin irritation.
- Do not place the device near stoves, microwave ovens, heating pots or high-pressure containers.
- The device contains a built-in battery. Avoid external vibration or shock when storing, using or transporting the device.
- It is not recommended to stick it on the skin. Keep at least about 1 cm away.
- Disinfect the panel after each use. Do not use cleaning products containing alcohol or volatile solvents.
- The device should not be used during the onset of photosensitive migraine.
- Collagen patients and anti-inflammatory drug users should not use this device.
Package Contents
Please check the package for the following items:
- Product (Handheld Device) x 1
- Instruction Manual x 1
- Charging Cable (USB Type-C) x 1
- Stand x 1
- Clip x 1
- Light-proof Glasses x 1
Product Overview
The device features an intuitive design with a display screen and control buttons for easy operation.
Display Screen:
- Time Display: Shows the remaining treatment time.
- Brightness Gear Display: Indicates the current intensity level.
- Power Display: Shows the battery level.
Buttons:
- Brightness Adjustment Key: Adjusts the light intensity (4 gears).
- Timer Button: Sets the treatment duration (12 steps, up to 60 minutes).
- On/Off Button: Powers the device on or off.
Light Emitters:
- 12 x 650nm Red LEDs: Visible to human eyes.
- 3 x 808nm Infrared LEDs: Light invisible to human eyes.
Note: The laser emitted from the center of the device is infrared light, which is invisible to the naked eye. This does not mean the device light is broken.
Setup
1. Charging the Device
- Connect the provided USB Type-C charging cable to the device's charging port.
- Plug the other end of the cable into a compatible 5.0V 1000mA (max) USB power adapter (not included).
- Allow the device to fully charge before its first use. The power display on the screen will indicate charging status.
- To prolong battery life, fully charge the device at least once a month.
2. Assembling the Stand (Optional)
The included stand allows for hands-free operation.
- Unfold the tripod legs of the stand for stability.
- Attach the device to the stand using the provided clip. Ensure it is securely fastened.
- Adjust the height and angle of the stand as needed for your treatment area. The stand features anti-slip feet and adjustable sections.
Operating Instructions
1. Power On/Off
- Power On: Press and hold the power button for 1-3 seconds. The instrument display will light up and enter the working mode.
- Power Off: Press and hold the power button for 1-3 seconds. The instrument display will turn off and shut down.
2. Timing Mode
- The default treatment time is 15 minutes after power on.
- Click the Timer button to add 5 minutes to the treatment time, up to a maximum of 60 minutes.
- Click the Timer button again after 60 minutes to return to zero and turn off the light.
3. Brightness Mode
- There are 4 brightness gears in total.
- Click the Brightness Adjustment button to increase the gear level.
- Click again after the 4th gear to return to 1st gear.
4. Application Guidelines
- Protective Eyewear: Always wear the provided light-proof glasses during operation to protect your eyes from direct exposure to the light.
- Distance: Hold the device 1-8 cm away from the skin. Avoid direct contact with the skin.
- Treatment Areas: The device can be applied to various body parts including the face, neck, arms, hands/fingers, legs/feet, forehead, and scalp.
Maintenance
Cleaning
- Disinfect the panel after each use.
- Do not use cleaning products containing alcohol or volatile solvents.
- Do not use corrosive items to clean this product.
Storage
- Store the device in a cool and dry place.
- Fully charge the device at least once a month to extend battery life.
- Avoid external vibration or shock when storing or transporting the device.
Troubleshooting
- Device not turning on: Ensure the device is fully charged. Press and hold the power button for 1-3 seconds.
- Light is not visible: The device emits both 650nm red light (visible) and 808nm infrared light (invisible). If you only see some lights, the invisible infrared lights are functioning normally.
- Device feels warm during use: It is normal for the device to generate some heat in the diode area during operation. If it becomes excessively hot, allow it to cool down before continuing use.
Specifications
| Feature | Specification |
|---|---|
| Product Name | Handheld laser spectrometer |
| Model | SM-43 |
| Charging Port | USB Type-C |
| Rated Voltage | 5.0V 1000mA (max) |
| Laser Wavelength | 650nm (Red Light), 808nm (Infrared Light) |
| Distance from Skin | 1-8 cm |
| Batteries Included | Yes |
| Electronic | Yes |
| Voltage | <50V AC |
| Application | Body |
| Certification | CE |
User Tips
Based on user experiences, here are some helpful tips for using your device:
- Consistency is Key: Users have reported significant improvement in conditions like bruises, arthritis, enthesitis, tendonitis, and intercostal neuritis with consistent use, often 10-15 minutes per affected area, 3 times a week.
- Battery Life: Expect the battery to last approximately 3-4 days with regular use of 10 minutes per application, three times a day.
- Device Warmth: The device may get warm in the diode area during extended use. It is advisable to give it a rest if it feels too hot.
- Application Distance: While the manual recommends 1-8 cm from the skin, some users have found success applying it directly to the skin. Always prioritize comfort and safety.
Frequently Asked Questions (FAQ)
- Q: What is the voltage of the device?
- A: The rated voltage is 5.0V 1000mA (max).
- Q: What distance from the skin should it be applied?
- A: It should be applied at a distance of 1-8 cm from the skin.
- Q: Is there a tripod for setting up?
- A: Yes, a stand (tripod) is included in the package for hands-free use.
Warranty and Support
For detailed warranty information and support, please refer to the official documentation provided with your purchase. A comprehensive user manual in PDF format is available for download or reference:
If you encounter any issues or have further questions, please contact the seller or manufacturer's customer service.