Product Overview
The XIAOMI Outdoor Camera 4 Dual Camera Version (Model: MJSXJ10HL) is a high-performance outdoor security camera featuring dual lenses, 5MP 3K resolution, 360° panoramic view, audible and visual alarms, two-way audio, and an IP66 weatherproof rating. This manual provides essential information for setting up, operating, and maintaining your camera.
Figure: Xiaomi Outdoor Camera 4 Dual mounted for outdoor surveillance.
Key Features
Figure: Overview of camera features.
- Dual Lens System: Features two lenses for comprehensive surveillance, offering both fixed and PTZ (Pan-Tilt-Zoom) views.
- 5MP 3K Ultra-Clear Vision: Provides high-resolution video for clear image capture.
- Smart Full-Color Night Vision: Enhanced night vision capabilities for clear, colored images in low-light conditions.
- Dual-Band Wi-Fi 6: Supports faster and more stable wireless connectivity.
- AI Human and Vehicle Recognition: Advanced AI algorithms for accurate detection and reduced false alarms.
- IP66 Weatherproof Rating: Designed to withstand outdoor elements like rain and dust.
- Acoustic-Optical Alarm: Triggers audible and visual alerts upon detection of suspicious activity.
- Two-Way Audio: Allows for real-time communication through the camera.
- Mijia Security Chip: Ensures data security and privacy.
- Ethernet Cable Connection: Provides an alternative for stable wired network connection.
Product Components (Fig. A)
- Network Cable Port
- Fill Light
- Dome Camera Lens
- Power Port
- Wall Mount
- Indicator
- Bullet Camera Lens
- Microphone
- Fill Light
- Waterproof Cover
- Speaker
- MicroSD Card Slot
- Reset Button
Package Contents
The package includes the following items:
Figure: Diagram of package contents.
- Xiaomi Outdoor Camera 4 Dual Camera Edition
- Power Adapter (Note: The adapter is sent according to the plug type you selected.)
- Wall-Mounted/Ceiling-Mounted Positioning Sticker
- Power Cord Waterproof Strip
- Screw Accessory Kit
- Network Port Waterproof Four-Piece Set
- Instruction Manual
Figure: Actual package contents.
Setup
1. Installing a microSD Card
The camera supports a microSD card from 16 GB to 256 GB. It is recommended to use a microSD card from a qualified brand with a read/write speed of no less than U1/Class 10.
- Ensure the camera is unplugged from the power source.
- Open the waterproof cover located above the microSD card slot.
- Insert the microSD card with its contact points facing down.
- After installation, make sure to place the waterproof cover back on the card slot properly to prevent water from entering the camera and affecting normal use.
CAUTION: Always unplug the camera when inserting or removing the microSD card.
Figure: MicroSD card insertion (Fig. B).
2. Mounting the Camera on a Wall
CAUTION: The wall must be able to support at least three times the total weight of the camera. The camera must be firmly fixed to the wall according to the installation instructions to prevent accidental injury.
- Prepare the Mounting Location: Paste the provided mounting template sticker where you intend to install the camera.
- Drill Holes: Using a drilling tool, drill four holes at the marked locations on the sticker. The holes should be approximately 6 mm in diameter and 40 mm in depth. (Refer to Fig. D-1, D-2, D-3)
- Insert Wall Plugs: Insert the four plastic wall plugs into the drilled holes.
- Secure the Mount: Place the camera mount against the wall, aligning the holes. Insert screws into the holes and drill them into the plastic wall plugs to secure the mount. (Refer to Fig. E-1 for wall mount, E-2 for ceiling mount)
- Waterproof Power Cable Port: After the camera is fixed, wrap the power cable port with the provided waterproof tape to ensure waterproof performance. (Refer to Fig. F-1 in the product overview section for visual reference of the power port)
Figure: Drilling template and hole preparation (Fig. D-1, D-2, D-3).
Figure: Wall mount and ceiling mount installation (Fig. E-1, E-2).
CAUTION: Do not install the camera near an air conditioner outdoor unit, range hood outlet, gas water heater outlet, or other heat sources.
3. Installing Waterproof Accessories for Network Port
The waterproof network port accessories include a sealing ring, waterproof sleeve, stopper, and waterproof rear cover. Proper installation is crucial for maintaining the IP66 rating.
- Place the sealing ring onto the camera's network cable port. (Refer to Fig. G-1)
- Thread the waterproof rear cover, stopper, and waterproof sleeve over the network cable in that order.
- Plug the network cable into the port.
- Screw together the waterproof sleeve and stopper, then screw together the waterproof rear cover and waterproof sleeve. (Refer to Fig. G-2, G-3)
Figure: Waterproof accessories installation (Fig. G-1, G-2, G-3).
4. Connecting with the Xiaomi Home App
This product works with the Xiaomi Home app. Use the app to control your device and interact with other smart home devices. Please download and use Xiaomi Home app version 9.6 and above.
- Download the App: Scan the QR code below to download and install the Xiaomi Home app. You will be directed to the connection setup page if the app is already installed. Alternatively, search for "Xiaomi Home" in your app store.
- Add Device: Open the Xiaomi Home app, tap "+" on the upper right corner, and follow the on-screen instructions to add your device.
- Region Setting (Important for Chinese Version): Since this is a Chinese version product, you must set the region to "Chinese mainland" in the Mi Home app settings for proper functionality. If your Mi Home account is connected to other devices in different regions, this camera cannot be connected at the same time.
- Device Reset (if needed): If the camera is powered on, press and hold the reset button (Component 13) for about 7 seconds until the indicator light keeps orange and a voice prompt confirms a successful reset. This is often needed before connecting or when switching networks/accounts.
- Select Wi-Fi Network: The device only supports 2.4GHz Wi-Fi. Select your Wi-Fi network and enter the password.
- Wait for Binding: Follow the prompts on the page and wait for the binding to be successful.
Figure: QR code for Xiaomi Home app.
Figure: Xiaomi Home app region settings (Set 1, Set 2, Set 3).
Figure: Xiaomi Home app device reset and Wi-Fi selection (Set 4, Set 5).
Note: Make sure the camera is turned on and the network connection is stable during connecting. The indicator keeps yellow when the camera is turned on, and then changes to blue after a successful connection.
Operating Instructions
1. Turning On the Camera
Insert the power adapter cable into the power port (Component 4) to automatically turn on the camera. The camera is successfully turned on when the indicator light (Component 6) is yellow and a voice prompt is heard.
Note: Please use the original charging cable and power adapter. Do not manually force the dome camera lens to rotate when the camera is turned on, as this can cause inaccurate positioning. If positioning is inaccurate, calibrate it in the Xiaomi Home app.
2. Indicator Status Description
- Yellow: Awaiting connection...
- Blinking Yellow: Connecting to a network...
- Blinking Blue: Connecting to a server...
- Keeping Blue: Connected successfully
3. Adjusting Camera Angle
Once the camera is fixed and turned on, the shooting angle of the bullet camera lens (Component 7) can be adjusted manually. The mount can be adjusted horizontally by 180° and the bullet camera lens can be adjusted up and down by 25°.
Figure: Camera angle adjustment (Fig. F-2).
4. Night Vision Modes
The camera supports both Infrared Night Vision and Smart Full-Color Night Vision, providing clear surveillance even in complete darkness.
Figure: Infrared vs. Full-Color Night Vision.
5. Dual-Band Wi-Fi 6 Connectivity
The camera utilizes Wi-Fi 6 technology for improved transmission rates and lower delays compared to older Wi-Fi standards, ensuring smoother video streaming and faster response times.
Figure: Wi-Fi 6 performance benefits.
Maintenance
1. Environmental Considerations
- Operating Temperature: The camera is designed to operate within a temperature range of -30°C to 60°C. Do not use the camera in environments outside this specified range.
- IP66 Rating: The camera has an IP66 dust-tight and water-resistant rating. However, to ensure normal use, avoid using the camera in extremely humid environments or locations that may cause water ingress.
- Power Adapter: The power adapter is not waterproof and is for indoor use only. Its operating temperature range is -30°C to 45°C. Do not use the power adapter in extremely humid environments or locations that may cause water ingress.
- Lens Placement: To optimize image quality, avoid placing the camera where its lens faces or is next to a reflective surface (e.g., glass, white walls). This can cause overly bright images in close areas and darker images further away, or result in white images.
- Wi-Fi Signal: Ensure the camera is installed in an area with a strong Wi-Fi signal. Avoid installing it near microwave ovens or other objects that may interfere with its Wi-Fi signal.
Figure: Camera's weatherproof design.
2. MicroSD Card Care
Always ensure the waterproof cover for the microSD card slot is properly sealed after inserting or removing the card to prevent water damage.
3. Cleaning
Periodically clean the camera lens and housing with a soft, dry cloth to remove dust and debris. Do not use harsh chemicals or abrasive materials that could damage the camera's finish or lens coating.
Troubleshooting
1. Resetting the Device
If you need to switch the network or the Xiaomi Account to which the camera is connected, you must first delete the camera from the Xiaomi Home app and then bind it again. Resetting the camera will not delete any data on the microSD card.
2. App Connection Issues
- Ensure you are using Xiaomi Home app version 9.6 or above.
- Verify that the camera is turned on and has a stable network connection. The indicator light should change from yellow to blue upon successful connection.
- Confirm that the Wi-Fi network is 2.4GHz, as the device does not support 5GHz Wi-Fi for initial connection.
- For this Chinese version, ensure the region in the Xiaomi Home app is set to "Chinese mainland".
3. Inaccurate Lens Positioning
If the lens positioning is inaccurate after turning on the camera, calibrate it within the Xiaomi Home app. Avoid manually forcing the dome camera lens to rotate.
4. Night Vision Click Sound
When the night vision feature is enabled, a slight click sound may be heard. This is normal and occurs when the camera's filter changes in response to ambient light variations.
5. Power Cable Damage
If the power cable is damaged or broken, it must be replaced by professionals from the manufacturer, after-sales service department, or departments of similar functions to avoid safety hazards.
6. Time Stamp Issues
If you are unable to change the time on the timestamp, please check the time zone settings within the Xiaomi Home app. Ensure the app and camera firmware are up to date, as updates often resolve such issues.
Specifications
| Feature | Specification |
|---|---|
| Product Name | Smart Camera |
| Model Number | MJSXJ10HL |
| Working Temperature | -30°C to 60°C |
| Storage Method | microSD card (16 GB to 256 GB) |
| Resolution | 2880x1620 (5 MP) |
| Video Compression Format | H.265 |
| Dimensions (L x W x D) | 189.5mm x 179.0mm x 98.0mm |
| Supported Mobile Systems | Android™ 8.0 and above, iOS 12.0 and above |
| Wireless Connection | Wi-Fi IEEE802.11a/b/g/n/ac/ax 2.4GHz/5GHz |
| Rated Input | 12V-1A |
| Aperture | f/1.6 |
| IP Rating | IP66 |
| Movement Range (Pan) | 0°-360° |
| Movement Range (Tilt) | -10°-180° |
| IR Distance | 10m |
| Lens (mm) | 2mm |
| Smart Home Platform | Mi Home |
| Installation | Pendant Mount, Vertical Pole Mount |
Warranty and Support
Warranty Notice
As a Xiaomi consumer, you benefit under certain conditions from additional warranties. Xiaomi offers specific consumer warranty benefits which are in addition to, and not instead of, any legal warranties provided by your national consumer law. The duration and conditions related to the legal warranties are provided by respective local laws. For more information about the consumer warranty benefits, please refer to Xiaomi's official website: https://www.mi.com/global/support/warranty.
Except as prohibited by laws or otherwise promised by Xiaomi, the after-sales services shall be limited to the country or region of the original purchase. Under the consumer warranty, to the fullest extent permitted by law, Xiaomi will, at its discretion, repair, replace or refund your product. Normal wear and tear, force majeure, abuse or damage caused by the user's negligence or fault are not warranted. The contact person for the after-sale service may be any person in Xiaomi's authorized service network, Xiaomi's authorized distributors or the final vendor who sold the products to you. If in doubt please contact the relevant person as Xiaomi may identify. The present warranties do not apply in Hong Kong and Taiwan.
Products which were not duly imported and/or were not duly manufactured by Xiaomi and/or were not duly acquired from Xiaomi or a Xiaomi's official seller are not covered by the present warranties. As per applicable law you may benefit from warranties from the non-official retailer who sold the product. Therefore, Xiaomi invites you to contact the retailer from whom you purchased the product.
Regulatory Compliance Information
WEEE Information: All products bearing the WEEE symbol indicate that they should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
EU Declaration of Conformity: Hereby, Xiaomi Communications Co., Ltd. declares that the radio equipment type MJSXJ08HL is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: http://www.mi.com/global/service/support/declaration.html.
Under normal use of condition, this equipment should be kept a separation distance of at least 20 cm between the antenna and the body of the user. It is recommended to use LPS power supply, or the PS Level of power output part is less than PS2.
Restrictions in the 5 GHz band: The WLAN function for this device is restricted to indoor use only when operating in the 5150-5250/5250-5350 MHz frequency range.
Manufacturer: Xiaomi Communications Co., Ltd.
Address: #019, 9th Floor, Building 6, 33 Xi'ergi Middle Road, Haidian District, Beijing, 100085, China.
For further information, please go to www.mi.com.
User Manual Version: V1.0
A detailed user manual in PDF format can be found here: User manual (PDF).
User Tips
- Region Setting is Crucial: As this is a Chinese version camera, always set your MiHome app region to "Chinese mainland" for proper functionality and to avoid connection issues.
- Excellent Image Quality: Users consistently report great image quality and robust build.
- Firmware Updates: The camera often updates its firmware immediately upon connection, which can resolve potential issues and improve performance.
- Connectivity: The camera requires Wi-Fi for control and operation. It cannot be operated without a Wi-Fi connection.